Honeywell FocusPRO 6000 Series Bedienungsanleitung

FocusPRO

6000Series

Programmable

Digital

Thermostat

User Guide

Read and save these instructions.

For help please visit yourhome.honeywell.com

Function buttons

Press to select the

function displayed just

above each button.

(Functions change

depending on the task.)

Temperature buttons

Press to set preferred temperature.

Battery holder

Thermostat controls

Digital display

Hold Button

Press to override programmed

temperature control

Reference card

SetClock/Day/

Schedule

Auto

Wake Wed

Fan

In Recovery

System

Auxiliary

Heat On

Heat

Setting

Inside

6:30

Replace Battery

MCR29458

Display screen

Low battery

warning

Press the FAN

button to select:

Auto: Fan runs only

when heating or

cooling system is on.

On: Fan runs

continuously.

Press the SYSTEM button

to select:

Heat: Heating system control.

Cool: Cooling system control.

Off: All systems off.

Auto: Thermostat

automatically selects heating

or cooling depending on the

indoor temperature.

Em Heat: Emergency &

Auxiliary Heat control.

Compressor is locked out.

(Select models only.)

Function buttons

Press the button beneath

each function to view

or change settings

(functions change

depending on the task)

System Status

Cool On: Cooling system

is on.

Heat On: Heating system

is on.

Temperature setting

Current inside

temperature

Auxiliary heat (Only

for heat pumps with

auxiliary heat)

Press the SET

button to change:

Clock: Current time.

Day: Current day.

Schedule: Current

thermostat program

schedule.

Program Schedule

You can program four time periods each day, with different settings for weekdays

and weekends. We recommend the pre-set settings (shown in the table below),

since they can reduce your heating/cooling expenses by as much as 33%.

Wake - Set to the time you

awaken and the temperature you

want during the morning, until

you leave for the day.

Leave - Set to the time you leave

home and the temperature you

want while you are away (usually

an energy-saving level).

Return - Set to the time you

return home and the temperature

you want during the evening, until

bedtime.

Sleep - Set to the time you go to bed and the temperature you want overnight

(usually an energy-saving level).

NOTE: Leave and Return periods can be canceled on weekends.

Heat Cool

Wake

(6:00 am) 70 °75 °

Leave

(8:00 am) 62 °83 °

Return

(6:00 pm) 70 °75 °

Sleep

(10:00 pm) 62 °78 °

Program schedule override (temporary)

To adjust program schedules

1. Press SET CLOCK/DAY/SCHEDULE,

then SET SCHEDULE.

2. Press sor tto set your weekday

Wake time (Mon–Fri), then press

NEXT.

3. Press sor tto set the temperature

for this time period, then press NEXT.

4. Set time and temperature for the

next time period (Leave). Repeat

steps 2 and 3 for each weekday time

period.

5. Press NEXT to set weekend time

periods (Sat-Sun), then press DONE

to save & exit.

NOTE: Make sure the thermostat is

set to the system you want to program

(Heat or Cool).

NOTE: You can press CANCEL PERIOD to

eliminate unwanted time periods (except

Wake).

SetClock/Day/

Schedule

Auto

FanSystem

Cool

Done

Set DaySet Schedule

Mon Tue Wed Thu Fri

Done CancelPeriod

Leave

Set Schedule

Heat

Setting

8:00

MCR29462

RunSchedule

Auto

FanSystem

Heat

Setting

Inside

6:30

Temporary

MCR29463

Press sor tto immediately adjust

the temperature. This will temporarily

override the temperature setting for

the current time period.

The new temperature will be

maintained only until the next

programmed time period begins.

For example, if you want to turn up

the heat early in the morning, it will

automatically be lowered later, when

you leave for the day.

To cancel the temporary setting at

any time, press RUN SCHEDULE.

NOTE: Make sure the thermostat is

set to the system you want to control

(heat, cool or auto).

Auto changeover (heat/cool)

Auto Changeover is a feature used in climates where both air conditioning

and heating are used on the same day. When the system is set to Auto, the

thermostat automatically selects heating or cooling depending on the indoor

temperature.

Heat and cool settings must be at least 3 degrees apart. The thermostat will

automatically adjust settings to maintain this

3-degree separation (called “deadband”).

The 3-degree separation between heating and cooling set temperatures is fixed,

and cannot be changed.

1. Press system button until screen

displays “Auto”.

NOTE: The Auto system setting may

not appear, depending on how your

thermostat was installed

SetClock/Day/

Schedule

Auto

FanSystem

Auto

MCR29465

Program schedule override (permanent)

RunSchedule

Auto

FanSystem

Heat

Setting

Inside

6:30

Hold

MCR29464

Press HOLD to permanently adjust

the temperature. This will override

the temperature settings for all time

periods.

The “Hold” feature turns off the program

schedule and allows you to adjust the

thermostat manually, as needed.

Whatever temperature you set will

be maintained 24 hours a day, until

you manually change it, or press RUN

SCHEDULE to cancel “Hold” and resume

the programmed schedule.

NOTE: Make sure the thermostat is set

to the system you want to control (heat,

cool or auto).

SetClock/Day/

Schedule

Auto

FanSystem

Cool On

Cool

Setting

Inside

6:30

MCR29466

Damage can occur if the compressor is

restarted too soon after shutdown. This

feature forces the compressor to wait for

a few minutes before restarting.

During the wait time, the display will

flash the message Cool On (or Heat On

if you have a heat pump). When the safe

wait time has elapsed, the message

stops flashing and the compressor turns

on.

Built-in compressor protection

Message flashes until safe

restart time has elapsed.

Adaptive Intelligent Recovery eliminates guesswork when setting your schedule.

It allows the thermostat to “learn” how long your furnace and air conditioner take

to reach the temperature you want.

Just set your program schedule to the time you want the house to reach your

desired temperature. The thermostat then turns on the heating or cooling at just

the right time to reach your scheduled temperature at your scheduled time.

For example: Set the Wake time to 6 am and the temperature to 70°. The heat

will come on before 6 am, so the temperature is 70° by the time you wake at 6.

Note: When Adaptive Intelligent Recovery is in effect, the thermostat will display

“In Recovery”.

Adaptive Intelligent Recovery™

For assistance with this product, please

visit yourhome.honeywell.com.

Or call Honeywell Customer Care toll-

free at 1-800-468-1502.

Customer assistance

Turn thermostat over to find

model number and date code.

Press and pull to remove.

CAUTION

Equipment damage hazard

To prevent possible compressor damage, do not operate cooling system

when outdoor temperature is below 50°F (10°C).

xxxxxxx xxxxxxx

MCR29468

Replace Battery

MCR29467

Batteries are optional (to provide

backup power) if your thermostat

was wired to run on AC power when

installed.

Install fresh batteries immediately when

the REPLACE BATTERY warning

begins flashing. The warning flashes

about two months before the batteries

are depleted.

Even if the warning does not appear,

you should replace batteries once a

year, or before leaving home for more

than a month.

If batteries are inserted within two

minutes, the time and day will not

have to be reset. All other settings are

permanently stored in memory, and do

not require battery power.

Battery replacement

Insert fresh AA alkaline

batteries, then reinstall

battery holder.

Press and pull to remove.

Troubleshooting

If you have difficulty with your thermostat, please try the following suggestions.

Most problems can be corrected quickly and easily.

Display is

blank

• Check circuit breaker and reset if necessary.

• Make sure power switch at heating & cooling system is

on.

• Make sure furnace door is closed securely.

• Make sure fresh AA alkaline batteries (depending on

model) are correctly installed (see page 6).

Heating

or cooling

system does

not respond

• Press SYSTEM button to set system Heat (see page 2).

Make sure the temperature is set higher than the Inside

temperature.

• Press SYSTEM button to set system to Cool (see page 2).

Make sure the temperature is set lower than the Inside

temperature.

• Check circuit breaker and reset if necessary.

• Make sure power switch at heating & cooling system is

on.

• Make sure furnace door is closed securely.

• Wait 5 minutes for the system to respond.

Temperature

settings do

not change

Make sure heating and cooling temperatures are set to

acceptable ranges:

• Heat: 40° to 90°F (4.5° to 32°C).

• Cool: 50° to 99°F (10° to 37°C).

“Cool On” or

“Heat On” is

flashing

• Compressor protection feature is engaged. Wait 5

minutes for the system to restart safely, without damage

to the compressor (see page 5).

To restore

default

settings

Follow these steps to restore default settings:

1. Press SET CLOCK/DAY/SCHEDULE.

2. Press SET SCHEDULE.

3. Press DONE and NEXT at the same time for 4 seconds.

Automation and Control Solutions

Honeywell International Inc.

1985 Douglas Drive North

Golden Valley, MN 55422

yourhome.honeywell.com

® U.S. Registered Trademark.

69-1921EFS—05 M.S. Rev. 10-13

Printed in U.S.A. 69-1921EFS-05

Honeywell warrants this product, excluding battery, to be free from defects in the

workmanship or materials, under normal use and service, for a period of five (5) years

from the date of purchase by the consumer. If at any time during the warranty period the

product is determined to be defective or malfunctions, Honeywell shall repair or replace it

(at Honeywell’s option).

If the product is defective,

(i) return it, with a bill of sale or other dated proof of purchase, to the place from which you

purchased it; or

(ii) call Honeywell Customer Care at 1-800-468-1502. Customer Care will make the

determination whether the product should be returned to the following address:

Honeywell Return Goods, Dock 4 MN10-3860, 1885 Douglas Dr. N., Golden Valley, MN

55422, or whether a replacement product can be sent to you.

This warranty does not cover removal or reinstallation costs. This warranty shall not apply

if it is shown by Honeywell that the defect or malfunction was caused by damage which

occurred while the product was in the possession of a consumer.

Honeywell’s sole responsibility shall be to repair or replace the product within the terms

stated above. HONEYWELL SHALL NOT BE LIABLE FOR ANY LOSS OR DAMAGE

OF ANY KIND, INCLUDING ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES

RESULTING, DIRECTLY OR INDIRECTLY, FROM ANY BREACH OF ANY WARRANTY,

EXPRESS OR IMPLIED, OR ANY OTHER FAILURE OF THIS PRODUCT. Some states

do not allow the exclusion or limitation of incidental or consequential damages, so this

limitation may not apply to you.

THIS WARRANTY IS THE ONLY EXPRESS WARRANTY HONEYWELL MAKES ON

THIS PRODUCT. THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,

IS HEREBY LIMITED TO THE FIVE-YEAR DURATION OF THIS WARRANTY.

Some states do not allow limitations on how long an implied warranty lasts, so the above

limitation may not apply to you. This warranty gives you specific legal rights, and you may

have other rights which vary from state to state.

If you have any questions concerning this warranty, please write Honeywell Customer

Relations, 1985 Douglas Dr, Golden Valley, MN 55422 or call 1-800-468-1502. In Canada,

write Retail Products ON15-02H, Honeywell Limited/Honeywell Limitée, 35 Dynamic Drive,

Toronto, Ontario M1V4Z9.

5-year limited warranty

Veuillez lire le mode d’emploi et le conserver en lieu sûr.

Pour obtenir de l’aide veuillez visiter yourhome.honeywell.com

FocusPRO

6000Série

Thermostat

numérique

programmable

Guide de l’utilisateur

Commandes de thermostat

Bouton de retenue

Appuyez pour supplanter

la commande de température

programmée

Porte-piles

Boutons de température

Appuyez pour régler la température voulue.

Affichage numérique

Boutons de fonctions

Appuyez pour

sélectionner la fonction

indiquée au-dessus de

chaque bouton. (Les

fonctions changent

selon la tâche.)

Carte de référence

SetClock/Day/

Schedule

Auto

Wake Wed

Fan

In Recovery

System

Auxiliary

Heat On

Heat

Setting

Inside

6:30

Replace Battery

MCR29458

Écran d’affichage

Appuyez sur le

bouton SET pour

modifier :

Horloge : Heure actuelle.

Jour : Jour actuel.

Programme : Horaire de

programmation actuel du

thermostat.

Température

intérieure

actuelle

Boutons de fonctions

Appuyez sur le boutons

en-dessous de chaque

fonction pour afficher ou

modifier les réglages (les

fonctions changent selon la

tâche)

Avertissement

de piles faibles

Réglage

de température

État du système

Cool On : Le système de

refroidissement est en marche.

Heat On : Le système de

chauffage est en marche.

Chauffage auxiliaire

(Seulement pour thermopompes

avec chauffage auxiliaire)

Appuyez sur le bouton

SYSTEM pour sélectionner :

Heat : Commande le système de

chauffage.

Cool : Commande le système de

refroidissement.

Off : Tous les systèmes sont à

l’arrêt.

Auto : Le thermostat sélectionne

automatiquement le chauffage ou

la climatisation en fonction de la

température intérieure.

Em Heat : Commande le

fonctionnement du système

de chauffage d’urgence et du

système de chauffage d’appoint. Le

compresseur est mis sous sécurité.

(Certains modèles seulement.)

Appuyez sur le

bouton FAN pour

sélectionner :

Auto : Ventilateur fonctionne

seulement quand le

système de chauffage ou

de refroidissement est en

marche.

On: Le ventilateur fonctionne

sans interruption.

Horaire de programmation

Vous pouvez programmer quatre périodes de temps par jour avec des

réglages différents pour les jours de semaine et les fins de semaine. Nous

recommandons ces préréglages (illustrés dans le tableau ci-dessous) puisqu’ils

peuvent réduire les dépenses de

chauffage et de refroidissement

jusqu’à 33 %.

Wake (Lever) - Réglez à l’heure

du lever et à la température

voulue le matin, jusqu’à votre

départ.

Leave (Départ) - Réglez à

l’heure du départ de la maison

et à la température voulue

durant votre absence (en règle

générale, un niveau d’économie

d’énergie).

Return (Retour) - Réglez à l’heure de votre retour à la maison et à la

température que vous voulez durant la soirée, jusqu’au coucher.

Sleep (Sommeil) - Réglez à l’heure du coucher et à la température voulue

durant votre sommeil (en règle générale, un niveau d’économie d’énergie).

REMARQUE : Les périodes de départ et de retour peuvent être annulées les

fins de semaine.

Chauffage Climatisation

Lever

(06:00) 70 °75 °

Départ

(08:00) 62 °83 °

Retour

(18:00) 70 °75 °

Sommeil

(22:00) 62 °78 °

Andere Handbücher für FocusPRO 6000 Series

Inhaltsverzeichnis

Andere Honeywell Thermostat Handbücher

Honeywell

Honeywell CHRONOTHERM T4700 Bedienungsanleitung

Honeywell

Honeywell RTH2510 Series Bedienungsanleitung

Honeywell

Honeywell T8700B Bedienungsanleitung

Honeywell

Honeywell Magic Stat CT3100 Bedienungsanleitung

Honeywell

Honeywell T Series Bedienungsanleitung

Honeywell

Honeywell RTH7000 Bedienungsanleitung

Honeywell

Honeywell T6380 Bedienungsanleitung

Honeywell

Honeywell L641A Bedienungsanleitung

Honeywell

Honeywell T8000 Bedienungsanleitung

Honeywell

Honeywell T6 Pro Hydronic Bedienungsanleitung

Honeywell

Honeywell T8112D Kurzanleitung

Honeywell

Honeywell TB7200 Series Bedienungsanleitung

Honeywell

Honeywell T4800A Bedienungsanleitung

Honeywell

Honeywell CT3400 Bedienungsanleitung

Honeywell

Honeywell CT30 Series Bedienungsanleitung

Honeywell

Honeywell RTH3100C Bedienungsanleitung

Honeywell

Honeywell CM901 Montageanleitung

Honeywell

Honeywell RTH230B - 5-2 Day Programmable Thermostat Bedienungsanleitung

Honeywell

Honeywell MagicStat 28 Bedienungsanleitung

Honeywell

Honeywell RTH9580 Wi-Fi Bedienungsanleitung

Honeywell

Honeywell CM61RF Bedienungsanleitung

Honeywell

Honeywell 191108AJ Bedienungsanleitung

Honeywell

Honeywell Easy-To-See POWERPILE TS86A Montageanleitung

Honeywell

Honeywell T8775 Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung

Aube Technologies

Aube Technologies TH305 Bedienungsanleitung

Powtier Controls

Powtier Controls 505MST Bedienungsanleitung

Kanmor

Kanmor Zone Control 369e Bedienungsanleitung

MICROclimate International

MICROclimate International B2 Magic Eye Bedienungsanleitung