Honeywell FocusPRO TH5220D Bedienungsanleitung

Operating

Manual

TH5220D

Non-programmable Digital Thermostat

® U.S. Registered Trademark. Patents pending.

Read and save these instructions

Need Help?

For assistance with this product please visit www.honeywell.com/yourhome

or call Honeywell Customer Care toll-free at 1-800-468-1502

Battery Holder

Press down and pull to

remove batteries.

Batteries should be

replaced once a year

(see page 10).

FocusPRO™TH5220D Non-programmable Digital Thermostat

AAbboouuttyyoouurrnneewwtthheerrmmoossttaatt

Thermostat features ........................2

Setup at a glance ............................3

Quick reference to controls............4

Quick reference to display..............5

PPrrooggrraammmmiinngg&&OOppeerraattiioonn

Fan setting (auto/on) ......................6

System setting (heat/cool/auto)........7

Auto-changeover (heat/cool) ..........8

Compressor protection ..................9

AAppppeennddiicceess

Battery replacement......................10

In case of difficulty ......................11

Customer assistance......................13

Accessories/replacement parts ....13

Limited warranty ..........................14

Table of contents

CAUTION: EQUIPMENT DAMAGE

HAZARD. To prevent possible

compressor damage, do not operate

cooling system when outdoor

temperature is below 50°F (10°C).

Operating Manual

About your new thermostat

Congratulations on the purchase of your new Honeywell thermostat. It has been

designed to give you many years of reliable service and easy-to-use, push-button

climate control.

Features

• One-touch temperature control.

• Large, clear, backlit display is easy to read — even in the dark.

• Displays both room temperature and temperature setting.

• Removable battery holder for fast, easy replacement.

• Built-in compressor protection.

FocusPRO™TH5220D Non-programmable Digital Thermostat

This thermostat is ready to go!

Your new thermostat is pre-programmed by the installer and ready to use. Just

check the settings below and change if needed:

1FFaann((AAuuttoo//OOnn))::Preset to Auto............................................To change, see page 6

Auto is the most commonly used setting, but you may

prefer On for improved air circulation.

2SSyysstteemm((HHeeaatt//CCooooll//AAuuttoo//EEmm..HHeeaatt))::Preset to Heat ..........To change, see page 7

You can select heating or cooling, or set the system

to control both systems automatically, if needed.

Operating Manual

Quick reference to controls

Digital display (see page 5) Battery holder (see page 10)

Temperature buttons

Press to set preferred

temperature.

Function buttons

Press to select the function displayed just above each button.

(Functions change depending on the task.)

Inside Heat

Setting

75 75

Auxiliary

Heat On

System

Heat

Fan

Auto

Replace

Battery

FocusPRO™TH5220D Non-programmable Digital Thermostat

Quick reference to display screen

Current inside

temperature

Low battery warning

(seepage 10)

Temperature setting

System status

Heat On/Cool On

(If flashing, see page 9)

Auxiliary heat

(Only for heat pumps

with auxiliary heat)

Function buttons

Press the button beneath each function to view or change

settings (functions change depending on the task)

System setting

Heat/Cool/Auto/Off/

Em Heat (see page 7)

Fan setting

Auto/On

(see page 6)

Operating Manual

Select the fan setting

Press the FFAANNbutton to select Auto or On.

In “Auto” mode (the most commonly used

setting), the fan runs only when the

heating or cooling system is on. If set to

“On,” the fan runs continuously. Use this

setting for improved air circulation, or for

more efficient air cleaning.

System

Heat

Fan

Auto

System

Heat

Fan

FocusPRO™TH5220D Non-programmable Digital Thermostat

Select the system setting

Note: The Auto and Em Heat

system settings may not appear,

depending on how your

thermostat was installed.

Press the SSYYSSTTEEMMbutton to select:

•HHeeaatt::Thermostat controls only the

heating system.

•CCooooll::Thermostat controls only the

cooling system.

•OOffff::Heating and cooling systems are off.

•AAuuttoo::Thermostat automatically selects

heating or cooling depending on the

indoor temperature.

•EEmmHHeeaatt(only for heat pumps with

auxiliary heat):Thermostat controls

Emergency and Auxiliary Heat.

Compressor is locked out.

System

Cool

Fan

Auto

System

Heat

Fan

Auto

Operating Manual

Auto Changeover (heat/cool)

Auto Changeover is a feature used in

climates where both air conditioning and

heating are used on the same day.When the

system is set to Auto, the thermostat

automatically selects heating or cooling

depending on the indoor temperature.

Heat and cool settings must be at least 3

degrees apart.The thermostat will automatically

adjust settings to maintain this 3-degree

separation (called “deadband”).

The 3-degree separation between heating

and cooling set temperatures is fixed, and

cannot be changed.

Press until screen

displays “Auto”

Note: The Auto system setting

may not appear, depending on

how your thermostat was

installed.

System

Auto

Fan

Auto

Andere Handbücher für FocusPRO TH5220D

Inhaltsverzeichnis

Andere Honeywell Thermostat Handbücher

Honeywell

Honeywell RTH8580WF Bedienungsanleitung

Honeywell

Honeywell T4 Pro Bedienungsanleitung

Honeywell

Honeywell MultiPRO TB7100A1000/U Bedienungsanleitung

Honeywell

Honeywell FocusPRO 5000 Bedienungsanleitung

Honeywell

Honeywell CT55N Bedienungsanleitung

Honeywell

Honeywell THX9321 Prestige 2.0 Bedienungsanleitung

Honeywell

Honeywell RCT8100 Bedienungsanleitung

Honeywell

Honeywell TH8110R1008/U Bedienungsanleitung

Honeywell

Honeywell T7300F Bedienungsanleitung

Honeywell

Honeywell TRADELINE Q7100A Bedienungsanleitung

Honeywell

Honeywell ST9500C Bedienungsanleitung

Honeywell

Honeywell TL5110 Bedienungsanleitung

Honeywell

Honeywell TP970 Series Gebrauchs- und Pflegehandbuch

Honeywell

Honeywell RTH6500WF Wi-Fi Series Bedienungsanleitung

Honeywell

Honeywell T4360G Bedienungsanleitung

Honeywell

Honeywell HEAT PUMP THERMOSTAT T8411R Bedienungsanleitung

Honeywell

Honeywell VisionPRO 8000 Smart Bedienungsanleitung

Honeywell

Honeywell RTH4300B Bedienungsanleitung

Honeywell

Honeywell TRADELINE Q7300H Series Bedienungsanleitung

Honeywell

Honeywell RTH7400 series Bedienungsanleitung

Honeywell

Honeywell LP916A Montageanleitung

Honeywell

Honeywell XE70 Series Bedienungsanleitung

Honeywell

Honeywell CM720 Bedienungsanleitung

Honeywell

Honeywell VisionPRO TH8320U Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung

Aube Technologies

Aube Technologies TH305 Bedienungsanleitung

Powtier Controls

Powtier Controls 505MST Bedienungsanleitung

Kanmor

Kanmor Zone Control 369e Bedienungsanleitung

MICROclimate International

MICROclimate International B2 Magic Eye Bedienungsanleitung