Honeywell PRO 2000 Series Bedienungsanleitung

Honeywell

Operating Manual

Mode d’emploi

Manual de Uso

Série PRO 2000 Series

Programmable Thermostats

Therm ostats program m ables

Termostatos programables

PRO 2000 Series

This manual covers the following models:

TH2 0D: For 1-Heat / 1-Cool systems

TH22 0D: For 2-Heat / 1-Cool heat pump systems

( emove the thermostat from its wallplate to find the model number.)

CAUTION: EQUIPMENT DAMAGE HAZARD.

To prevent possible compressor damage, do not use Cooling mode when the

outdoor temperature is below 50 °F (10 °C).

Need Help?

For assistance with this product please visit http://yourhome.honeywell.com

or call Honeywell Customer Care toll-free at -800-468- 502.

Read and save these instructions.

® U.S. egistered Trademark. Patents pending.

ENGLISH

Operating Manual

Table of contents

Overview Appendices

Thermostat features

.......................

........

1 Battery replacement........................... ... 14

Quick start.........................................

........

2 In case of difficulty

..............................

... 15

Quick reference to controls...........

........

3 Customer assistance.......................... ... 16

Quick reference to display

.............

........

4 2-year limited warranty

......................

... 17

Programming & Operation

Setting the clock

..............................

........

System switch (Heat/Cool)

............

........

Fan switch (Auto/On)

......................

........

Using the schedule.......................... ...8-10

Temporary schedule override

....... .......

Permanent schedule override

......

12 Your new thermostat is pre-programmed

Adaptive Intelligent ecovery™ ...

......

13 and ready to go!

Compressor protection...................

......

13 See page 2 for quick start.

PRO 2000 Series

About your new thermostat

Your new Honeywell thermostat has been designed to give you many years of reliable

service and easy-to-use, push-button climate control.

Features

• Backlit display is easy to read

• Displays ambient (measured) temperature at all times

• One-touch access to setpoint temperature

• Preprogrammed schedule can greatly reduce your heating/cooling expenses

• Separate programmable weekday/weekend schedules (5+2 day programming)

• Temporary and permanent override of schedule

• Adaptive Intelligent ecovery™ ensures right temperature at the right time

• Built-in compressor protection

ENGLISH

Operating Manual

This thermostat is ready to go

Simply perform the three steps below and the thermostat is in operation:

o Set the clock....................................................................................................................See page 5

.....................

See page 7

If you do not wish to use the pre-programmed schedule settings, you can:

► Modify the schedule...................................................................................................See page 10

► Temporarily override the schedule..........................................................................See page 11

► Permanently override the schedule

........................................................................

See page 12

PRO 2000 Series

Quick reference to controls

Screen

Lit for 2 seconds when you press any button.

Fan Switch (see page 7)

On: Fan runs all the time.

Auto: Fan runs only when

heating or cooling is taking place.

System switch (see page 6)

• Cool: System is in Cooling mode.

• Off: System is off.

• Heat: System is in Heating mode.

• Em Heat: System is in Emergency Heat mode

ENGLISH

Operating Manual

Quick reference to display

Temporary schedule override

(see page )

Setpoint indicator

Appears when the setpoint

temperature is displayed.

Low-battery warning -

(see page 4)

Permanent schedule override

(see page 2)

Schedule period

M0X

D nn"

D-UU

Set

Batt

Temporary /

nrr7

ILl.u

Hold on

-Wake

Clock

Temperature

The ambient (measured) temperature

is normally displayed. To view the

setpoint temperature, press either of

the temperature adjustment buttons

once. The setpoint temperature will

appear for five seconds.

System status

• Cool On: Cooling is activated. * **

• Heat On: Heating is activated. *

• Aux On: Auxiliary heat is activated.

* When Heat On or Cool On is flashing, ompressor prote tion is engaged (see page 13).

** Applies to TH2210D model only.

PRO 2000 Series

Set the clock

O Press the Set button. Set Time will appear on the screen and the time Set Time

display will flash. I — lanm —

saved if you do not press any button for 60 seconds.) Set Day

NOTE: The clock has lo s t its settings when the tim e display flashes. If the

therm ostat is follow ing the schedule, it w ill use the tem perature settings

progra m m ed fo r the Wake p eriod o f the w eekdays until you re ad u st the clock.

ENGLISH

Operating Manual

System switch

Use the System switch to place the system in one of the

following modes:

• Cool: System is in Cooling mode.

• Off: System is off.

• Heat: System is in Heating mode.

• Em Heat: System is in Emergency Heat mode. Only auxiliary

heating can be activated. The compressor is disabled. (This

mode is available on the TH22 0D model only.)

CAUTION: EQUIPMENT DAMAGE HAZARD.

Do not use Cooling mode when the outdoor

temperature is below 50 0F (10 °C).

Andere Handbücher für PRO 2000 Series

Inhaltsverzeichnis

Sprachen:

Andere Honeywell Thermostat Handbücher

Honeywell

Honeywell Braukmann T104F Bedienungsanleitung

Honeywell

Honeywell AQ1000TN2 - Low Voltage T-Stat Bedienungsanleitung

Honeywell

Honeywell Q682 Bedienungsanleitung

Honeywell

Honeywell T8700B Bedienungsanleitung

Honeywell

Honeywell T8511 Bedienungsanleitung

Honeywell

Honeywell 8161 Bedienungsanleitung

Honeywell

Honeywell WebStat T7350 Betriebsanleitung

Honeywell

Honeywell FocusPRO TH6320R01 Bedienungsanleitung

Honeywell

Honeywell RTH1120 Bedienungsanleitung

Honeywell

Honeywell RTH6300B Bedienungsanleitung

Honeywell

Honeywell Super Tradeline T874G Bedienungsanleitung

Honeywell

Honeywell T8095A Bedienungsanleitung

Honeywell

Honeywell INNCOM e7w Bedienungsanleitung

Honeywell

Honeywell WebStat T7351F Benutzerhandbuch

Honeywell

Honeywell RTH2510 Series Bedienungsanleitung

Honeywell

Honeywell RTH7400 series Bedienungsanleitung

Honeywell

Honeywell EnergyPro T8665C Bedienungsanleitung

Honeywell

Honeywell CMT927 Bedienungsanleitung

Honeywell

Honeywell RTH8500 Series Bedienungsanleitung

Honeywell

Honeywell RTHL3550 Bedienungsanleitung

Honeywell

Honeywell CT30 Series Bedienungsanleitung

Honeywell

Honeywell TH8320ZW1000 Bedienungsanleitung

Honeywell

Honeywell RTH2520 Bedienungsanleitung

Honeywell

Honeywell T7200D Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung

Aube Technologies

Aube Technologies TH305 Bedienungsanleitung

Powtier Controls

Powtier Controls 505MST Bedienungsanleitung

Kanmor

Kanmor Zone Control 369e Bedienungsanleitung

MICROclimate International

MICROclimate International B2 Magic Eye Bedienungsanleitung