Honeywell RTH8500 Series Bedienungsanleitung

Operating

Manual

RTH8500

Touchscreen Programmable Thermostat

69-2220EF-03

Read and save these instructions.

Need Help?

For assistance with this product please visit http://DIYthermostats.honeywell.com

or call Honeywell Customer Care toll-free at 1-800-468-1502

® U.S. Registered Trademark.

US Patent No. 6,595,430; 7,114,554; 7,274,972; 7,225,054; D520,386 and other patents pending.

BE CAREFUL! Never use sharp instruments, such as a pencil

or pen, to press touchscreen keys. To prevent damage to the

thermostat, always press keys with your fingertip.

M28372

This thermostat contains a Lithium battery which may contain Perchlorate material.

Perchlorate Material—special handling may apply,

See www.dtsc.ca.gov/hazardouswaste/perchlorate

Note: Remove wallplate from the thermostat and see the label

on the back of the thermostat for model number.

1 69-2220EF—03

About your new thermostat

Thermostat features ..........................................2

Programming at a glance..................................3

Quick reference to controls...............................4

Quick reference to status display......................5

Programming & Operation

Clock setting......................................................6

Fan setting.........................................................7

System setting...................................................8

Using program schedules..................................9

Program schedule overrides............................12

Vacation hold...................................................14

Screen cleaning...............................................15

Furnace filter reminder....................................16

Special features...............................................17

Appendices

Battery replacement/

Customer assistance .......................................18

In case of difficulty..........................................19

Limited warranty .............................................21

This thermostat is ready to go!

Your new thermostat is pre-

programmed and ready to go.

See page 3 to check settings.

Table of contents

CAUTION: EQUIPMENT DAMAGE

HAZARD. To prevent possible

compressor damage, do not oper-

ate cooling system when outdoor

temperature is below 50˚F (10˚C).

RTH8500

Operating Manual

69-2220EF—03 2

About your new thermostat

Congratulations! You’ve just purchased the world’s most advanced, easy-to-use ther-

mostat. It has been designed to give you many years of reliable service and touch-

screen climate control.

Features

• 7-day program schedules maximize comfort and economy.

• Armchair programming: Just pull thermostat from the wall to set schedules.

• One-touch temp control overrides program schedule at any time.

• Precise comfort control keeps temperature within 1°F of the level you set.

• Change/check reminders let you know when to replace filters and batteries.

• Large touchscreen display with backlight is easy to read—even in the dark.

RTH8500

3 69-2220EF—03

About your new thermostat

Your new thermostat is pre-programmed and ready to go. All you have to do is set the

time and day. Then check the settings below and change if needed:

1. Set clock........................................................................................................................ See page 6

2. Select fan setting: Preset to Auto ....................................................... To change, see page 7

3. Select system setting: Preset to Heat .............................................. To change, see page 8

4. Program schedules: Preset to energy-saving levels

while you’re at work or asleep (assumes you

wake at 6 am, leave at 8 am, return at 6 pm

and go to bed at 10 pm).................................................................... To change, see pages 10-13

ONE-TOUCH TEMP CONTROL: You can override the program schedule at any time,

and manually adjust the temperature (see pages 12-14).

This thermostat is ready to go!

Operating Manual

69-2220EF—03 4

SCHED HOLD CLOCK SCREENMORE

MON TUE WED THU FRI SAT SUN

FAN

AUTO

SYSTEM

HEAT

Following

Schedule

Inside Set To

OK TO PICK MULTIPLE DAYS

6:01

M28373

Press day(s) to set program schedule (see page 11)

Press to select fan

operation (see page 7)

Press to select system

type (see page 8)

Press to set program

schedule (see page 11)

Press to adjust

temperature settings

(see pages 11-14)

Press for more options

(select models only)

Press to override

program schedule

(see pages 12-14)

Press to set clock

(see page 6)

Press to lock keypad for 30

seconds to clean screen

(see page 17)

Quick reference to controls

RTH8500

5 69-2220EF—03

SCHED HOLD CLOCKSCREEN MORE

WED

FAN

AUTO

SYSTEM

HEAT

Following

Schedule

Inside Set To

Recovery

6:01

M28374

Current inside temperature Current day of week Temperature setting

Program schedule on

(does not display

when off)

Fan setting

Other display messages:

• Cool On: Cooling system is activated

• Heat On: Heating system is activated

• Aux Heat On: Auxiliary heating system is activated

(heat pump systems only)

Quick reference to status display

System setting

Current time

Smart Response®

Technology in effect

(see page 15)

Operating Manual

69-2220EF—03 6

To set the current time display, press CLOCK, then

press s or t to adjust the time. Press and hold s or

t to advance the time more quickly.

Press DONE to save & exit (or press CANCEL to exit

without changing the time).

Note: The real-time clock should never require

adjustment since it automatically updates for

daylight savings time, and stores all date/time

information.

Note: To change the current week day display, see

see System Setup in your Installation Guide.

Press CLOCK

Adjust time, then press DONE

SCHED HOLD CLOCK SCREEN MORE

WED

FAN

AUTO

Inside Set To

6:01

M28375

DONE CANCEL

WED

FAN

AUTO

Inside Set To

6:02

M28376

Clock setting

RTH8500

7 69-2220EF—03

Press FAN to select fan operation, then press DONE.

• On: Fan is always on.

• Auto: Fan runs only when the heating or

cooling system is on.

Press FAN

SCHED HOLDCLOCK SCREEN MORE

WED

SYSTEM

HEAT

Following

Schedule

Inside Set To

6:01

FAN

AUTO

M28377

Fan setting

Operating Manual

69-2220EF—03 8

SCHED HOLD CLOCK SCREEN MORE

WED

Following

Schedule

Inside Set To

6:01

FAN

AUTO

SYSTEM

HEAT

M28378

Press the SYSTEM button to select, then press DONE.

• Heat: Thermostat controls only the

heating system.

• Cool: Thermostat controls only the

cooling system.

• Auto: Thermostat automatically selects

heating or cooling depending on the

indoor temperature.

• Off: Heating and cooling systems are off.

• Em Heat (only for heat pumps with

auxiliary heat): Thermostat controls

Emergency and Auxiliary Heat.

Compressor is locked out.

System setting

Note: The Auto and Em Heat

system settings may not

appear, depending on how

your thermostat was installed.

Andere Handbücher für RTH8500 Series

Inhaltsverzeichnis

Sprachen:

Andere Honeywell Thermostat Handbücher

Honeywell

Honeywell RTH2300 series Bedienungsanleitung

Honeywell

Honeywell RTH2510 Series Bedienungsanleitung

Honeywell

Honeywell RCT8101 Bedienungsanleitung

Honeywell

Honeywell FocusPRO TH6110D Bedienungsanleitung

Honeywell

Honeywell RTH3100C Bedienungsanleitung

Honeywell

Honeywell T8635L Bedienungsanleitung

Honeywell

Honeywell PRO TH3210D Bedienungsanleitung

Honeywell

Honeywell TL8130A1005 Bedienungsanleitung

Honeywell

Honeywell PRO TH4000 series Bedienungsanleitung

Honeywell

Honeywell Tradeline T874D Bedienungsanleitung

Honeywell

Honeywell DTC 100/4 TD Bedienungsanleitung

Honeywell

Honeywell TC500A Bedienungsanleitung

Honeywell

Honeywell ultrastat CT1700A Bedienungsanleitung

Honeywell

Honeywell RTH8500WF Bedienungsanleitung

Honeywell

Honeywell C Bedienungsanleitung

Honeywell

Honeywell FocusPRO 5000 Bedienungsanleitung

Honeywell

Honeywell Prestige 2.0 IAQ Bedienungsanleitung

Honeywell

Honeywell T6 Pro Hydronic Bedienungsanleitung

Honeywell

Honeywell T6 Pro Z-Wave Bedienungsanleitung

Honeywell

Honeywell T7460A Bedienungsanleitung

Honeywell

Honeywell TL8100 Bedienungsanleitung

Honeywell

Honeywell CT62A Bedienungsanleitung

Honeywell

Honeywell RTH2300 series Bedienungsanleitung

Honeywell

Honeywell CT62A Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung

Aube Technologies

Aube Technologies TH305 Bedienungsanleitung

Powtier Controls

Powtier Controls 505MST Bedienungsanleitung

Kanmor

Kanmor Zone Control 369e Bedienungsanleitung

MICROclimate International

MICROclimate International B2 Magic Eye Bedienungsanleitung