Honeywell PRO 4000 Series Bedienungsanleitung

PRO

4000

Series

Programmable

Digital

Thermostat

User Guide

Read and save these instructions.

Your new thermostat is pre-programmed. Just set the time and day. For help

please visit yourhome.honeywell.com

Press to set desired temperature.

NOTE: Set SYSTEM switch to the system you want

to control (Heat or Cool).

Fan Switch is used to

control your fan.

Auto: Fan runs only when

heating or cooling system

is on.

On: Fan runs continuously.

System switch is used to control your heating

or cooling system.

Cool: Cooling system control.

Off: All systems off.

Heat: Heating system control.

Em Heat: Emergency & Auxiliary Heat control.

Compressor is locked out. (Select models only.)

Set: Sets time/day/schedule.

Hold: Overrides programmed temperature.

Run: Resumes program schedule.

Thermostat controls

Set the time and day

Set

Clock

6:30

Wed

Set Day

1. Press the SET button, then press

sor tto set the clock time.

2. Press the SET button, then press

s or t to select the day of the

week.

3. Press RUN to save & exit.

NOTE: If the display flashes Set Clock,

the thermostat will follow your settings

for the weekday “Wake” time period

until you reset the time and day.

Current program

period

Wake/Leave/

Return/Sleep

Current day/time

Wake

Wed

Recovery

Em Aux

Heat On

Set To

Inside

6:30

Replace Batt

Current inside

temperature

If flashing, compressor

protection is engaged.

Adaptive Intelligent

RecoveryTM

System Status

Cool On: Cooling system is on.

Heat On: Heating system is on.

Em: Emergency heat is on. **

Aux: Auxiliary heat is on. **

** Only for heat pumps with

this capability (select models

only).

Temperature setting

(or Desired Temperature

when changing temperature)

Low battery

warning

Display screen

It’s easy to program your system for maximum energy savings. You can program

four time periods each day, with different settings for weekdays and weekends.

Set to the time you awaken and the temperature you want

during the morning, until you leave for the day.

Set to the time you leave home and the temperature you

want while you are away (usually an energy-saving level).

Set to the time you return home and the temperature you

want during the evening, until bedtime.

Set to the time you go to bed and the temperature you want

overnight (usually an energy-saving level).

Save money by setting program schedules

WAKE

6:00 am

70 °

LEAVE

8:00 am

62 °

RETURN

6:00 pm

70 °

SLEEP

10:00 pm

62 °

This thermostat is pre-set with energy-saving program settings. We recommend

these settings, since they can reduce your heating/cooling expenses by as much

as 33%. If you need to create a new schedule follow the steps on the next page.

To adjust program schedules

Wake

Set Schedule

MonTueWedThuFri

Heat

Set To

6:30

Wake

Set Schedule

MonTueWedThuFri

Heat

Set To

6:30

1. Press SET until Set Schedule is

displayed.

2. Press sor tto set your weekday

Wake time (Mon-Fri), then press SET.

3. Press sor tto set the temperature

for this time period, then press SET.

4. Set time and temperature for the next

time period (Leave). Repeat steps 2

and 3 for each weekday time period.

5. Press SET to set weekend time

periods (Sat-Sun), then press RUN to

save & exit.

NOTE: Make sure the thermostat is set

to the system you want to program (Heat

or Cool).

NOTE: To cancel an unwanted time

period (except Wake), press and hold

s+ HOLD for 4 seconds while in the Set

Schedule mode.

Program schedule override (permanent)

Press HOLD to permanently adjust

the temperature. This will override

the temperature settings for all time

periods.

The “Hold” feature turns off the program

schedule and allows you to adjust the

thermostat manually, as needed.

Whatever temperature you set will be

maintained 24 hours a day, until you

manually change it, or press RUN to

cancel “Hold” and resume the program

schedule.

This feature helps prevent damage to

the compressor in your air conditioning

or heat pump system.

NOTE: Make sure the thermostat is set

to the system you want to control (heat

or cool).

Set To

6:30

Hold

Set To

6:30

Press sor tto immediately adjust

the temperature. This will temporarily

override the temperature setting for the

current time period.

The new temperature will be maintained

only until the next programmed time

period begins. For example, if you want

to turn up the heat early in the morning,

it will automatically be lowered later,

when you leave for the day.

To cancel the temporary setting at any

time, press RUN.

NOTE: Make sure the thermostat is set

to the system you want to control (heat

or cool).

Program schedule override (temporary)

Set To

6:30

Te mporary

Set To

6:30

Adaptive Intelligent RecoveryTM (AIR)

Damage can occur if the compressor is

restarted too soon after shutdown. This

feature forces the compressor to wait

for a few minutes before restarting.

During the wait time, the display will

flash the message Cool On (or Heat

On if you have a heat pump). When

the safe wait time has elapsed, the

message stops flashing and the

compressor turns on.

Adaptive Intelligent Recovery eliminates guesswork when setting your

schedule. It allows the thermostat to “learn” how long your furnace and air

conditioner take to reach the temperature you want.

Just set your program schedule to the time you want the house to reach your

desired temperature. The thermostat then turns on the heating or cooling at just

the right time to reach your scheduled temperature at your scheduled time.

For example: Set the Wake time to 6 am and the temperature to 70°. The heat

will come on before 6 am, so the temperature is 70° by the time you wake at 6.

Wake

Wed

Cool

Set ToInside

6:30

MCR29477

Built-in compressor protection

Batteries are optional (for backup

power) if your thermostat was wired to

run on AC power when installed.

Install fresh batteries when the REPLACE

BATT warning begins flashing. The

warning flashes about two months

before the batteries are depleted.

Replace batteries once a year, or

before leaving home for more than a

month. If batteries are inserted within

one minute, the time and day will not

have to be reset. All other settings are

permanently stored in memory, and do

not require battery power.

Battery replacement

Turn thermostat

over, insert fresh

AA alkaline

batteries, then

reinstall thermostat.

Pull at bottom

to remove

thermostat

from

wallplate.

Message flashes until safe

restart time has elapsed.

For assistance with this product, please

visit yourhome.honeywell.com.

Or call Honeywell Customer Care toll-

free at 1-800-468-1502.

Customer assistance

Turn thermostat

over to find model

number and date

code.

Pull at bottom

to remove

thermostat

from

wallplate.

CAUTION

Equipment damage hazard

To prevent possible compressor damage, do not operate cooling

system when outdoor temperature is below 50°F (10°C).

Grasp and pull to see basic operating

instructions at a glance.

Quick Reference

Troubleshooting

If you have difficulty with your thermostat, please try the following suggestions.

Most problems can be corrected quickly and easily.

Display is

blank

• Check circuit breaker and reset if necessary.

• Make sure power switch at heating & cooling system is

on.

• Make sure furnace door is closed securely.

• Make sure fresh AA alkaline batteries are correctly

installed (see page 5).

Heating

or cooling

system does

not respond

• Set system switch to Heat (see page 1). Make sure

the temperature is set higher than the Inside temperature.

• Set system switch to Cool (see page 1). Make sure

the temperature is set lower than the Inside temperature.

• Wait 5 minutes for the system to respond.

Temperature

settings do

not change

Make sure heating and cooling temperatures are set to

acceptable ranges:

• Heat: 40° to 90°F (4.5° to 32°C).

• Cool: 50° to 99°F (10° to 37°C).

“Cool On” or

“Heat On” is

flashing

• Compressor protection feature is engaged. Wait 5

minutes for the system to restart safely, without damage

to the compressor (see page page 5).

“Heat On” is

not displayed

• Set the System switch to Heat, and set the

temperature level above the current room

temperature (see page 1).

“Cool On” is

not displayed

• Set the System switch to Cool, and set the

temperature level below the current room

temperature (see page 1).

Automation and Control Solutions

Honeywell International Inc.

1985 Douglas Drive North

Golden Valley, MN 55422

yourhome.honeywell.com

® U.S. Registered Trademark.

69-1760EFS—07 M.S. Rev. 04-13

Printed in U.S.A.

69-1760EFS-07

Honeywell warrants this product, excluding battery, to be free from defects in the

workmanship or materials, under normal use and service, for a period of five (5) years

from the date of purchase by the consumer. If at any time during the warranty period the

product is determined to be defective or malfunctions, Honeywell shall repair or replace it

(at Honeywell’s option).

If the product is defective,

(i) return it, with a bill of sale or other dated proof of purchase, to the place from which

you purchased it; or

(ii) call Honeywell Customer Care at 1-800-468-1502. Customer Care will make the

determination whether the product should be returned to the following address:

Honeywell Return Goods, Dock 4 MN10-3860, 1885 Douglas Dr. N., Golden Valley, MN

55422, or whether a replacement product can be sent to you.

This warranty does not cover removal or reinstallation costs. This warranty shall not apply

if it is shown by Honeywell that the defect or malfunction was caused by damage which

occurred while the product was in the possession of a consumer.

Honeywell’s sole responsibility shall be to repair or replace the product within the terms

stated above. HONEYWELL SHALL NOT BE LIABLE FOR ANY LOSS OR DAMAGE

OF ANY KIND, INCLUDING ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES

RESULTING, DIRECTLY OR INDIRECTLY, FROM ANY BREACH OF ANY WARRANTY,

EXPRESS OR IMPLIED, OR ANY OTHER FAILURE OF THIS PRODUCT. Some states

do not allow the exclusion or limitation of incidental or consequential damages, so this

limitation may not apply to you.

THIS WARRANTY IS THE ONLY EXPRESS WARRANTY HONEYWELL MAKES ON

THIS PRODUCT. THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IS

HEREBY LIMITED TO THE FIVE-YEAR DURATION OF THIS WARRANTY.

Some states do not allow limitations on how long an implied warranty lasts, so the above

limitation may not apply to you. This warranty gives you specific legal rights, and you may

have other rights which vary from state to state.

If you have any questions concerning this warranty, please write Honeywell Customer

Relations, 1985 Douglas Dr, Golden Valley, MN 55422 or call 1-800-468-1502. In Canada,

write Retail Products ON15-02H, Honeywell Limited/Honeywell Limitée, 35 Dynamic Drive,

Toronto, Ontario M1V4Z9.

5-year limited warranty

Veuillez lire le mode d’emploi et le conserver en lieu sûr.

Votre nouveau thermostat est préprogrammé. Il suffit de régler l’heure et le jour.

Pour obtenir de l’aide veuillez visiter yourhome.honeywell.com

PRO

4000Série

Thermostat

numérique

programmable

Guide de l’utilisateur

Appuyer pour régler la température désirée.

REMARQUE : S’assurer que le sélecteur du SYSTEM

est bien placé au système à commander (chauffage

ou refroidissement

La commande FAN

(ventilateur) est utilisée pour

commander le ventilateur.

Auto : Ventilateur fonctionne

seulement quand le

système de chauffage ou

de refroidissement est en

marche.

On : Le ventilateur

fonctionne sans interruption.

La commande SYSTEM (système) est utilisée

pour commander le système de chauffage ou de

refroidissement.

Cool : Commande le système de refroidissement.

Off : Tous les systèmes sont à l’arrêt.

Heat : Commande le système de chauffage.

Em Heat : Commande le fonctionnement du système

de chauffage d’urgence et du système de chauffage

d’appoint. Le compresseur est mis sous sécurité.

(Certains modèles seulement.)

Set : Règle heure/jour/programme.

Hold : Déroge à la température programmée.

Run : Revient au programme prévu.

Commandes de thermostat

Régler l’heure et le jour

Set

Clock

6:30

Wed

Set Day

1. Appuyer sur le bouton SET, puis

sur sou tpour régler l’heure.

2. Appuyer sur le bouton SET, puis

sur sou tpour choisir le jour

de la semaine.

3. Appuyer sur RUN pour enregistrer

les réglages et quitter.

REMARQUE :Si les mots Set Clock

clignotent à l’écran, le thermostat

respectera la consigné prévue pour la

période de réveil (WAKE) jusqu’à ce

que le jour et l’heure soient réglés.

Période du

programme en

cours

Réveil, Départ,

Retour, Sommeil

Wake

Wed

Recovery

Em Aux

Heat On

Set To

Inside

6:30

Replace Batt

Lorsqu’elle clignote, la protection

du compresseur est activée.

Adaptive Intelligent

RecoveryTM

Réglage de la température

(ou température désirée lors

du changement du réglage

de la température)

Écran d’affichage

Température

ambiante actuelle

Avertissement

de piles

faibles

État du système

Cool On : Le système de

refroidissement est en marche.

Heat On : Le système de

chauffage est en marche.

Em : Le système de chauffage

d’urgence est en marche.**

Aux : Le système de chauffage

d’appoint est en marche.**

**Seulement pour les

thermopompes qui offrent cette

fonction (certains modèles

seulement).

Jour et heure

en cours

Andere Handbücher für PRO 4000 Series

Inhaltsverzeichnis

Sprachen:

Andere Honeywell Thermostat Handbücher

Honeywell

Honeywell CT54 Bedienungsanleitung

Honeywell

Honeywell PRO 3000 Series Bedienungsanleitung

Honeywell

Honeywell Chronotherm IV T8600D Bedienungsanleitung

Honeywell

Honeywell CT8602 Bedienungsanleitung

Honeywell

Honeywell TH8320ZW1000 Bedienungsanleitung

Honeywell

Honeywell E529.RF Bedienungsanleitung

Honeywell

Honeywell RTHL2510 series Bedienungsanleitung

Honeywell

Honeywell RTH2310 Bedienungsanleitung

Honeywell

Honeywell PRO TH4210D Bedienungsanleitung

Honeywell

Honeywell FocusPRO TH6320R01 Bedienungsanleitung

Honeywell

Honeywell PRO TH4110D Bedienungsanleitung

Honeywell

Honeywell RCT8101 Bedienungsanleitung

Honeywell

Honeywell TB3 Series Bedienungsanleitung

Honeywell

Honeywell VT15 Bedienungsanleitung

Honeywell

Honeywell RTH7400 series Bedienungsanleitung

Honeywell

Honeywell T822 Bedienungsanleitung

Honeywell

Honeywell UtilityPRO Series Bedienungsanleitung

Honeywell

Honeywell INNCOM e7w Bedienungsanleitung

Honeywell

Honeywell TL6120 Bedienungsanleitung

Honeywell

Honeywell VFD CORE Bedienungsanleitung

Honeywell

Honeywell PRO TH1100D Bedienungsanleitung

Honeywell

Honeywell RTH2310 Bedienungsanleitung

Honeywell

Honeywell LYRIC T4 Bedienungsanleitung

Honeywell

Honeywell TH8110U1003 - VisionPro Thermostat Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung

Aube Technologies

Aube Technologies TH305 Bedienungsanleitung

Powtier Controls

Powtier Controls 505MST Bedienungsanleitung

Kanmor

Kanmor Zone Control 369e Bedienungsanleitung

MICROclimate International

MICROclimate International B2 Magic Eye Bedienungsanleitung