Honeywell R6H911RF Gebrauchsanweisung

T6R-2Z-EN0H 8603 NL01 R0718

2-zone application

2XT6R SMART THERMOSTAT & 2-CHANNEL RECEIVER BOX

APPLICATION MANUAL

With the new 2-channel Receiver box (R6H911RF) and

2x a T6R wireless smart thermostats (T6H700RW)

automatic time and temperature control of 2 heating

zones and a boiler for homes and apartments can be

managed.

It’s compatible with 24-230V on/off and OpenTherm®

appliances such as gas boilers, combi-boilers and heat

pump. Also works with zone valve applications but not

with electric heating (240V).

The solution is designed with the installer in mind.

The 2-channel Receiver box offers mounting options for

directly on the wall or on a wall box. Wiring can be from

below or from the back by lifting the terminal platform,

which makes installation quick and easy.

The T6R wireless thermostat has a high contrast PMVA

display with dynamic text line and touch screen buttons.

The thermostat has a simple programming philosophy to

make it easier to install and very user friendly.

The 2-zone solution is ideal for consumers who want to

split the comfort control of their home in 2 areas, like

upstairs and down-stairs or a living and working area.

The solution offers remote comfort control of both zones

via the Honeywell Home app.

FEATURES

T6R Smart Thermostat

Attractive, ultra-modern styled thermostats make it ideal for

any location in any type of home.

Wireless with table stand to fit a new and retrofit

installations.

Wi-Fi communication to connect to the Internet

- Smart Home and Apple HomeKit ready

A dynamic text display on the LCD that gives enhanced

feedback to the user / installer.

High LCD Contrast and backlighting for easier viewing in all

light conditions.

Time out screen with selectable brightness

Factory programmed daily or 5+2 default heating schedule.

Schedule with up to 6 independent time and temperature

pairs to suit the comfort needs.

“Hold until”temperature override of programmed schedule

temperature till the next switch point.

Schedule off mode for manual operation.

Setpoint and room temperature always displayed.

OFF position has an integral frost protection setting at

minimum 5C so that pipes in the house will never freeze in

winter.

Alert messages to assist in fault-finding.

Honeywell Home mobile App for:

- Remote view and change of settings

- Schedule changes

- Smartphone Geolocation temperature control



User menu allows extra functions to be set at the discretion

of the user:

- Language selection

- Wi-FI setup

- Optimisation

- Clock setting

- Resetting the heating program to factory default

- Brightness

- Temperature offset

- Lock function

Advanced menu (Installer Set-Up) allows extra functions to

be set at the discretion of the installer to match the

consumers applications and needs:

- System type

- OpenTherm data

- Upper / Lower Set point Limit Adjust

- Minimum ON time

- Cycle rate

- Factory Reset

- Binding

2-channel Receiver box

Clear LED indication of bound devices

Override button per zone with LED indication

Simple binding via override button

A flip up wiring platform for easy wiring

Pinhole for easy reset.

2 on/off relay outputs

OpenTherm®compatible heating control output.

2 ZONE T6R SMART THERMOSTAT

2 T6R-2Z-EN0H 8603 NL01 R0718

T6R THERMOSTAT DISPLAY/BUTTON LAYOUT

Reference to the icons:

2-CHANNEL RECEIVER BOX

INTERFACE

Schedule period

2 ZONE T6R SMART THERMOSTAT

T6R-2Z-EN0H 8603 NL01 R0718

WIRING OPTIONS 2-CHANNEL RECEIVER BOX

The 2-channel Receiver box always requires 230V power and is suitable for both 24V and 230V zone valve

applications.

Note: For the wiring of the OpenTherrm® boiler a separate cable is required.

C) Wiring 2 zone valves (24V) and 24V

on/off boiler

Zone valve end switches used for

controlling boiler (demand)

D) Wiring 2 zone valves (24V) OpenTherm®

boiler

Demand of zones used for controlling

(modulating) OpenTherm® boiler

A) Wiring 2 zone valves (230V) and basic

230V on/off boiler

Zone valve end switches used for

controlling boiler (demand)

B) Wiring 2 zone valves (230V) and OpenTherm®

boiler

Demand of zones used for controlling

(modulating) OpenTherm® boiler

2 ZONE T6R SMART THERMOSTAT

T6R-2Z-EN0H 8603 NL01 R0718

B. Wall box or Rear wiring

Hinge open the terminal block flap to access the

cables and wall box screw holes.

C. Surface wiring

Use the cable clamps to secure the surface

wiring.

D. Replace cover

Locate the hinges at the top of the cover and wall

plate, close the cover and secure with the screw.

A. Opening and removing top cover

Loosen the front screw and hinge open to remove

the top cover.

To ensure your safety, always make sure mains power is switched OFF before accessing wiring.

Find a suitable location near the boiler. Leave at least 30cm distance from any metal objects including wall

boxes and boiler housing.

POWER UP 2-CHANNEL RECEIVER BOX

Turn ON mains power to the 2-channel Receiver box and the Heating Appliance and installation is complete.

None of the LED’s will be lit after power up!

Do not plug-in the adapter of one of the T6R thermostats yet, because they need to be bound to the Receiver

box.

MOUNTING AND WIRING 2-CHANNEL RECEIVER BOX

2 ZONE T6R SMART THERMOSTAT

T6R-2Z-EN0H 8603 NL01 R0718

Zone 1 Thermostat powering up, setup and binding

T6R THERMOSTAT SET UP AND BINDING

Both the T6R Smart Thermostats still need to be bound to the 2-channel Receiver box before they can control

the comfort in their zone.

Now place the first zone thermostat near the 2-channel Receiver box and plug-in the adapter.

When SETUP is displayed on the screen of the thermostat, follow the next steps:

Choose the

appropriate plug.

Touch

to begin

setup.

Select language.

Set clock format, time

and date.

Touch

to start binding

with 2-channel Receiver box.

Next put the 2-channel Receiver box into binding mode by

pressing Zone 1 button for 3 sec.

- The first RF LED will flash amber

Touch

and the signal

will be sent.

When binding successful:

- thermostat shows SUCCESSS

Zone 1 status LED shows green

touch

to proceed.

Touch

to select

system type.

When binding is NOT successful:

- Thermostat will show FAILED

- Receiver box will exit binding after 3 min.

RF communication might be too far or is blocked due to wrong location of the

Thermostat or Receiver box. Try to move closer or re-locate and re-bind again.

Note: When the Receiver box has been bound before first press

with a small pin the pinhole for approximately 3 seconds to

reset the binding. All LED’s will flash amber for a moment.

2 ZONE T6R SMART THERMOSTAT

T6R-2Z-EN0H 8603 NL01 R0718

Touch

to finalise setup.

(

to setup using the

Honeywell App is currently

unsupported)

Touch

to select heat

only application

Zone 1 thermostat setup and

binding is complete.

Thermostat is switched OFF

Zone 2 Thermostat powering up, setup and binding

Now place the second zone thermostat near the 2-channel Receiver box and plug-in the adapter.

When SETUP is displayed on the screen of the thermostat, follow the next steps:

Touch

to begin

setup.

Select language.

Set clock format, time

and date.

Touch

to start binding

with 2-channel Receiver box.

Next put the 2-channel Receiver box into binding mode by

pressing Zone 2 button for 3 sec.

- The first RF LED will flash amber

Touch

and the signal

will be sent.

When binding successful:

- thermostat shows SUCCESSS

Zone 2 status LED shows green

touch

to proceed.

2 ZONE T6R SMART THERMOSTAT

T6R-2Z-EN0H 8603 NL01 R0718

After binding the second zone the binding and setup is complete.

Place both thermostats on an even and horizontal surface in their appropriate area (zone)

to control the comfort.

Note: The thermostats should not be placed near draughts, in direct sunlight or near heat

sources. It should be at least 1.2 - 1.5 meters from the floor.

Use the included stickers on the cover of the Receiver box to indicate

the application.

Touch

to finalise setup.

(

to setup using the

Honeywell App is currently

unsupported)

Touch

to select heat

only application

Zone 2 thermostat setup and

binding is complete.

Thermostat is switched OFF

Once setup is completed go to the advanced menu to change application specific changes.

2 ZONE T6R SMART THERMOSTAT

T6R-2Z-EN0H 8603 NL01 R0718

Special Features

Description

Heat Range

The normal lower temperature limit of 5 oC can be increased up to 21 oC to protect the

inhabitants from cold conditions. This is a useful feature aimed at supporting the elderly,

children and disabled inhabitants.

The normal upper temperature limit of 35 oC can be reduced down to 21 oC to save energy. This

feature is useful for leased homes and apartments.

Schedule options

The thermostat has 2 default schedules: daily (every day) and 5+2 (week + weekend days)

Optimisation (optimal

start, optimal stop and

delayed start)

Optimal Start: learns how long it takes your system to reach the programmed temperature. It

turns on the heating system earlier to make sure it’s comfortable at the scheduled time.

Optimal Stop: Saves energy and money by switching off a little bit earlier than the normal

programmed time. If the home is up to temperature, it will not notice the effect on the

temperature, but will show a difference in the fuel bill.

Delayed start: Saves energy by slightly delaying the start of heating depending on the

difference between the scheduled temperature and the actual room temperature

Clock setting

Change display format (default 24hr) and adjust time and date.

When connected to Internet time and date will be synchronized

Low Load Control

If the Receiver box is connected to an OpenTherm appliance this setting is used in the demand

control. When an appliance is no longer able to modulate lower the control switches from

modulating control to low/off control.

Temperature Offset

If the Thermostat is located in a hot/cold location and cannot be moved because of wiring then

the measured/ displayed temperature can be adjusted by +/- 1,5 oC. This feature is useful if the

homeowner wants the reading to match another appliance temperature display.

Binding

Menu to bind the Thermostat and the Receiver box, test the RF signal strength of the radio

communication and to clear an existing binding.

Reset

Menu to reset the thermostat back to factory default settings, reset the schedule to default

settings, reset the Wi-Fi and Homekit settings.

Failsafe

When the radio communication between the Thermostat and Receiver box is lost for longer

than 1 hour the Receiver box will start to cycle the demand 20% on / 80% off.

Menu item

Default

Options

Language

English

English, Francais, Espanol, Deutsch, Nederlands, Italiano

OpenTherm

OpenTherm boiler data when a vailable (see OpenTherm communication)

Cycle rate

3,6,9 or 12

Min on time

1 minute

1, 2, 3, 4 or 5 minutes

Heat range

Min = 5.0

Max = 37.0

Min: 5.0°C to 21.0 °C, Max:21.0°C to 37.0 °C

Schedule options

Daily

1 = daily schedule, 2 = 5+2 days schedule

Optimisation

Opt.start on

Opt.stop off

Opt start: 0 = off, 1 = on, 2 = Delayed start

Opt stop: 0 = off, 1 = on

Clock

Format: 24h

Time: --:--

Date: 01/09/2016

Clock format: 1 = 12h, 2 = 24h

Setup time and date

Low Load Control

0= Off, 1 = On

Temperature offset

0.0

-1.5°C to 1.5 °C

Bind

Bind, check RF and clear bind.

Adv Reset

Factory, schedule, Wi-Fi and Homekit reset

Failsafe

OFF

0= Off, 1 = On

ADVANCED MENU

To enter the Advanced menu (installer set-up):

Press the menu key for 5 seconds.

2 ZONE T6R SMART THERMOSTAT

T6R-2Z-EN0H 8603 NL01 R0718

OPENTHERM® COMMUNICATION

OpenTherm® is a manufacturer independent communication protocol between modulating appliances (boilers, air heaters

and heat recovery units) and room thermostats.

Via the OpenTherm® protocol, the Receiver box of the T6 / T6R thermostat constantly communicates with the connected

appliance.

Modulating

The T6/T6R thermostat controls, via the Receiver box, the OpenTherm® communicating appliance modulating. This means

that, depending on the heat demand, the burner capacity is adjusted in the appliance. This creates a very accurate control

of the room temperature.

On top of that, this method of temperature control is more energy-efficient and environmentally friendly.

Low Load Control

When a boiler is no longer capable of modulating back it will stop the burner and then will be a cycling on it's own

continuously during this low control setting (requested water temperature).

In order to have a proper performance and to switch the pump on/off as well we created low load control. This is cycling

between off and min modulation level.

The cycle rate is related to the time the water temperature is cooling off below the control setpoint (demand) and the on

time of the boiler to get heated to the control setpoint.

It's an algorithm which optimizes the cycle rate and tries to get the boiler on for the longest time.

Hot water control

Most Combi-boilers have a small internal storage for hot tap water. By keeping a number of liters of hot water, the

appliance can supply hot tap water directly without having to heat it up first. With a longer period of none use or absence,

for example sleep or holiday, the hot water storage does not have to be kept at a high temperature.

The T6/T6R thermostat can provide additional savings here. With the last programmed period (sleeping)

the hot water status can easily be switched to a saving level or completely be switched off.

With these Combi-boilers, a menu "Hot water during sleep" (on/off) will be available in the installer menu (page 6).

OpenTherm® data

De T6/T6R thermostat offers the ability to view some appliance data via de OpenTherm® communicatie.

See table on page 6 which data can be viewed.

Note: Depending on the connected appliance, more or less data is displayed on the T6/T6R thermostat and certain

settings of the appliance may or may not be changed from the thermostat. Refer to the instruction manual of the

appliance for specific information.

Advanced menu item

Default

Data / Options

OpenTherm

Submenu

(read only)

-Low Load Control

-Control Setpoint Requested supply temperature

-Supply Water Temperature Actual supply water temperature

-Return Water Temperature Actual return water temperature

-Max Supply Water Temperature

-Hot water Temperature Actual hot water temperature

-Hot Water Setpoint

-Actual Power Actual power of appliance

-Water Pressure

Hot Water Overnight

0= OFF, 1 = ON

Hot Water Setpoint

30 tot 75 °C (appliance depending)

Max Supply Water Setpoint

30 tot 90 °C (appliance depending) - future

Low Load Control

0= OFF, 1 = ON

2 ZONE T6R SMART THERMOSTAT

T6R-2Z-EN0H 8603 NL01 R0718

HEAT DEMAND CONTROL

The control of the heat demand of the 2 zones depends on the applied boiler type.

An on/off boiler or an OpenTherm® modulating boiler can be applied.

The 2-channel Receiver box receives from both zone thermostats the heat demand and will control the

corresponding zone valve via the relay contact to open.

For the cycle rate setting recommend the standard setting 6x per hour.

When an on/off boiler is applied, it can only be controlled on/off by means of the zone valve end switches

For an OpenTherm® boiler, use the OpenTherm® connection on the 2-channel Receiver box.

ON/OFF controlled boiler

The boiler will be switched on when one of the zone valves is completely opened and the end switch switches.

When both end switches are not switched, the boiler is off.

The cycle rate setting determines also the cycle rate of the boiler.

There is no synchronization of the heat demand of the 2 zone thermostats, which could cause the boiler to

switch off (end demand of a zone) and almost instantly switch on again by the demand of the other zone.

Some boilers have an anti-cycle time, which prevents them from switching on directly again.

OpenTherm® controlled boiler

When one of the zone thermostats communicates a demand the OpenTherm® will also be receiving a heat

demand. When both zones no longer require heat the demand is taken away and the boiler will switch off.

The 2-channel Receiver box constantly compares the demand of both zones and communicates the highest

demand to the OpenTherm® boiler.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Honeywell Thermostat Handbücher

Honeywell

Honeywell CAMIR-8EZS Bedienungsanleitung

Honeywell

Honeywell VFD CORE Bedienungsanleitung

Honeywell

Honeywell RLV310 Bedienungsanleitung

Honeywell

Honeywell T5+ Bedienungsanleitung

Honeywell

Honeywell TRADELINE Q7100A Bedienungsanleitung

Honeywell

Honeywell WebStat T7350 Bedienungsanleitung

Honeywell

Honeywell RTH7400 series Bedienungsanleitung

Honeywell

Honeywell RedLINK Bedienungsanleitung

Honeywell

Honeywell FT69 Series Bedienungsanleitung

Honeywell

Honeywell TRADELINE R8184G Leitfaden

Honeywell

Honeywell RTH2510 Series Bedienungsanleitung

Honeywell

Honeywell RTH8500 Series Bedienungsanleitung

Honeywell

Honeywell RTH4300B Bedienungsanleitung

Honeywell

Honeywell FocusPRO TH5000 Series Bedienungsanleitung

Honeywell

Honeywell T8611C Bedienungsanleitung

Honeywell

Honeywell Lyric T5 Wi-Fi Bedienungsanleitung

Honeywell

Honeywell VisionPRO Wi-Fi TH8320WF Bedienungsanleitung

Honeywell

Honeywell T8601D Bedienungsanleitung

Honeywell

Honeywell RTHL2310 series Bedienungsanleitung

Honeywell

Honeywell RTH2520 Bedienungsanleitung

Honeywell

Honeywell T8022D Bedienungsanleitung

Honeywell

Honeywell RTH8580WF Bedienungsanleitung

Honeywell

Honeywell VisionPRO THM5421C1008 Bedienungsanleitung

Honeywell

Honeywell RCT8100 Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung

Aube Technologies

Aube Technologies TH305 Bedienungsanleitung

Powtier Controls

Powtier Controls 505MST Bedienungsanleitung

Kanmor

Kanmor Zone Control 369e Bedienungsanleitung

MICROclimate International

MICROclimate International B2 Magic Eye Bedienungsanleitung