Honeywell RTH2300 series Bedienungsanleitung

Operating

Manual

RTH2300/RTH221 Series

Programmable Thermostat

69-2727ES-01

Read and save these instructions.

Need Help?

For assistance with this product please visit http://yourhome.honeywell.com

or call Honeywell Customer Care toll-free at 1-800-468-1502

® U.S. Registered Trademark. Patents pending.

This manual covers the following models:

RTH2300

RTH221

CAUTION: EQUIPMENT DAMAGE HAZARD.

To prevent possible compressor damage, do not operate cooling system when outdoor

temperature is below 50°F (10°C).

RTH2300/RTH221

1 69-2727ES—01

About your new thermostat

Thermostat features.................................... 2

Thermostat is preset, ready to go............... 3

Quick reference to controls ......................... 4

Quick reference to display........................... 5

Programming & Operation

Set time and day......................................... 6

Select system setting.................................. 7

Select fan setting ........................................ 8

Using program schedules ..................... 9–10

Adjust program schedule (RTH2300) ....... 11

Adjust program schedule (RTH221) ......... 12

Program schedule overrides ............... 13–14

Compressor protection.............................. 15

Change Filter (RTH2300).......................... 16

Appendices

Battery replacement.................................. 17

Customer assistance ................................ 18

In case of difficulty .............................. 19–20

Limited warranty........................................ 21

This thermostat is ready to go!

Your new thermostat is pre-programmed

and ready to go.

See page 10 to check settings.

Table of contents

Operating Manual

69-2727ES—01 2

About your new thermostat

Your new Honeywell thermostat has been designed to give you many years of reliable

service and easy-to-use, push-button climate control.

Features

• BacklitdisplayonRTH2300

• Displaysambient(measured)temperatureatalltimes

• One-touchaccesstosetpointtemperature

• Presetprogramsettings

• Temporaryandpermanentoverrideofschedule

• Built-incompressorprotection

RTH2300/RTH221

3 69-2727ES—01

This thermostat is ready to go!

Your new thermostat is pre-programmed and ready to go. All you have to do is set the

time and day. Then check the settings below and change if needed:

1. Set time and day (required for proper operation)..............................See page 6

2. Select system setting: Preset to Off ....................................To change, see page 7

3. Select fan setting: Preset to Auto .......................................To change, see page 8

4. Program schedules: Preset to energy-saving levels

while you’re at work or asleep........................................To change, see pages 9-12

ONE-TOUCH TEMP CONTROL: You can override the program schedule at any time, and

manually adjust the temperature (see pages 13-14).

Operating Manual

69-2727ES—01 4

M33612

Heat Off Cool Auto On

Fan

Heat Off Cool Auto On

Fan

Set

Hold

Run

Quick reference to controls

Temperature

adjustment (see

page 13-14)

Screen Lit for 12 seconds when you press any button.

Fan Switch (see page 8)

On: Fan runs continuously.

Auto: Fan runs only when heating or cooling system

is on.

Set: Press to set time/

day/schedule.

Hold: Press to override

programmed tempera-

ture control.

Run: Press to resume

program schedule.

System switch (see page 7)

• Heat: Heating system control.

• Off: All systems off.

• Cool: Cooling system control.

RTH2300/RTH221

5 69-2727ES—01

M32701

Batt

Wake

Set

Heat

6:30

Quick reference to display screen

Low battery warning

(see page 16)

Setpoint indicator

Appears when the

setpoint temperature

is displayed.

Temperature

The ambient (measured)

temperature is normally

displayed. To view the

setpoint temperature,

presstheUporDown

button once. The setpoint

temperature will appear for

five seconds.

System status

Cool on: Cooling system is on.

Heat on: Heating system is on.

WhenCoolOnisflashing,compressorprotectionisengaged(seepage15).

Current day/time

(see page 6)

Current program period

Wake/Leave/Return/Sleep

(see pages 9-10)

Operating Manual

69-2727ES—01 6

Set

Hold

Run

Set Time

6:30

M33787

Set Day

Set

Hold

Run

M33788

Set the time and day

1. Press the SET button, then press s or t

to set the clock time.

2. Press the SET button, then press s or t

to select the day of the week.

3. Press RUN to save & exit.

Note: If the clock flashes, the thermostat will follow

your settings for the Monday “Wake” time period

until you reset the time and day.

Press SET, then adjust time.

Press SET, then select current day.

RTH2300/RTH221

7 69-2727ES—01

M33612

Heat Off Cool Auto On

Fan

Heat Off Cool Auto On

Fan

Set

Hold

Run

Select the system setting

The SYSTEM switch can be set to control

your heating or cooling system, depending

on the season.

• Cool: Cooling system control.

• Off: All systems are off.

• Heat: Heating system control.

Set SYSTEM switch to control the

heating or cooling system.

CAUTION: EQUIPMENT DAMAGE

HAZARD. To prevent possible

compressor damage, do not operate

cooling system when outdoor

temperature is below 50°F (10°C).

Operating Manual

69-2727ES—01 8

Select the fan setting

Set the FAN switch to Auto or On.

In “Auto” mode (the most commonly used

setting), the fan runs only when the heating

or cooling system is on.

Ifsetto“On,”thefanrunscontinuously.

Set FAN switch to choose whether the fan

runs continuously or only as needed.

M33612

Heat Off Cool Auto On

Fan

Heat Off Cool Auto On

Fan

Set

Hold

Run

Andere Handbücher für RTH2300 series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Honeywell Thermostat Handbücher

Honeywell

Honeywell CM701 Bedienungsanleitung

Honeywell

Honeywell RTHL2510 series Bedienungsanleitung

Honeywell

Honeywell VisionPRO IAQ Bedienungsanleitung

Honeywell

Honeywell RTHL2510 series Bedienungsanleitung

Honeywell

Honeywell Tradeline T8611M Bedienungsanleitung

Honeywell

Honeywell DMULTISTAGE T8524C Bedienungsanleitung

Honeywell

Honeywell RTH7400 series Bedienungsanleitung

Honeywell

Honeywell 8162 Bedienungsanleitung

Honeywell

Honeywell T6 Pro Z-Wave Bedienungsanleitung

Honeywell

Honeywell CM907 Bedienungsanleitung

Honeywell

Honeywell VisionPRO 8000 Bedienungsanleitung

Honeywell

Honeywell RTH7000 Bedienungsanleitung

Honeywell

Honeywell PRO TH3110D Bedienungsanleitung

Honeywell

Honeywell PRO TH4210D Bedienungsanleitung

Honeywell

Honeywell TL7230A Bedienungsanleitung

Honeywell

Honeywell Lyric T6 Bedienungsanleitung

Honeywell

Honeywell PRO TH3110B Bedienungsanleitung

Honeywell

Honeywell Round T8700C Bedienungsanleitung

Honeywell

Honeywell DTC 100/2 Bedienungs- und Wartungshandbuch

Honeywell

Honeywell LP916A-C Bedienungsanleitung

Honeywell

Honeywell Tradeline T8511G Bedienungsanleitung

Honeywell

Honeywell FocusPRO TH6220D Bedienungsanleitung

Honeywell

Honeywell T834C Bedienungsanleitung

Honeywell

Honeywell ZSTAT Installationshandbuch

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung

Aube Technologies

Aube Technologies TH305 Bedienungsanleitung

Powtier Controls

Powtier Controls 505MST Bedienungsanleitung

Kanmor

Kanmor Zone Control 369e Bedienungsanleitung

MICROclimate International

MICROclimate International B2 Magic Eye Bedienungsanleitung