Honeywell RTH2300 series Bedienungsanleitung

69-2326ES-04

RTH2300

5+2 Programmable Thermostat

Operating

Manual

Read and save these instructions.

CAUTION: EQUIPMENT DAMAGE HAZARD

To prevent possible compressor damage, do not use Cooling mode when the

outdoor temperature is below 50°F (10°C).

Need Help?

For assistance with this product please visit http://DIYthermostats.honeywell.com

or call Honeywell Customer Care toll-free at 1-800-468-1502.

Programmable Thermostat RTH2300

Overview

Thermostat features ..............................2

Quick start .............................................3

Quick reference to controls ...................4

Quick reference to display.....................5

Programming & Operation

Setting the clock....................................6

System switch (Heat/Cool)....................7

Fan switch (Auto/On).............................8

Using the schedule...........................9-11

Temporary schedule override..............12

Permanent schedule override .............13

Compressor protection........................14

Appendices

Battery replacement ........................... 15

In case of difficulty .............................. 16

Customer assistance .......................... 17

One-year limited warranty .................. 18

Table of contents

Your new thermostat is pre-programmed

and ready to go!

See page 3 for quick start.

Operating Manual

Your new thermostat has been designed to give you many years of reliable service and

easy-to-use, push-button climate control.

Features

• Backlit display is easy to read

• Displays ambient (measured) temperature at all times

• One-touch access to setpoint temperature

• Energy-saving settings for maximum cost savings

• Separate programmable weekday/weekend schedules (5+2 day programming)

• Temporary and permanent override of schedule

• Built-in compressor protection

About your new thermostat

Programmable Thermostat RTH2300

Simply perform the three steps below and the thermostat is in operation:

Set the clock ................................................................................................ See page 6

Select whether to heat or cool...................................................................... See page 7

Select whether to run the fan continuously or only when needed................ See page 8

This thermostat is pre-set with energy-saving program settings. If you do not wish to use

these settings, you can:

Modify the schedule ....................................................................................See page 11

Temporarily override the schedule ............................................................. See page 12

Permanently override the schedule............................................................ See page 13

This thermostat is ready to go

Operating Manual

Quick reference to controls

System switch (see page 7)

•Cool: System is in Cooling mode.

•Off: System is off.

•Heat: System is in Heating mode.

Fan switch (see page 8)

•On: Fan runs continuously.

•Auto: Fan runs only when

heating or cooling is activated.

Up/Down buttons

Press to adjust temperature.

Screen

Lit for 12 seconds when

you press any button.

Press to set clock, day or

schedule (see pages 6 & 11).

Press to override schedule and

hold temperature (see page 13).

Press to run (follow) schedule

(see page 9).

Programmable Thermostat RTH2300

Quick reference to display

* When Heat On or Cool On is flashing, compressor protection is engaged (see page 14).

Temperature

The ambient (measured) temperature is

normally displayed. To view the setpoint

temperature, press the Up or Down

button once. The setpoint temperature

will appear for five seconds.

System status

• Cool On: Cooling is activated. *

• Heat On: Heating is activated. *

Low-battery warning

(see page 15)

Setpoint indicator

Appears when the setpoint

temperature is displayed.

Clock

Schedule period

Permanent schedule override

(see page 13)

Temporary schedule override

(see page 12)

Operating Manual

Press the Set button. Set Time will appear on the screen and the

time display will flash.

Press the Up or Down button to set the time.

Press the Set button again. Set Day will flash on the screen.

Press the Up or Down button to select the day of the week.

Press the Run button to save the changes & exit. (The changes

are also saved if you do not press any button for 60 seconds.)

NOTE: The clock has lost its settings when the time display flashes. If the thermostat is

following the schedule, it will use the temperature settings programmed for the Wake

period of the weekdays until you readjust the clock.

Set the clock

Programmable Thermostat RTH2300

System switch (Heat/Cool)

Use the System switch to place the system in

one of the following modes:

•Cool: System is in Cooling mode.

•Off: System is off.

•Heat: System is in Heating mode.

CAUTION: EQUIPMENT DAMAGE HAZARD.

Do not use Cooling mode when the outdoor temperature is below 50°F (10°C).

Operating Manual

Fan switch (Auto/On)

Use the Fan switch to select the fan operation.

•Auto: The fan runs only when heating or

cooling is activated (commonly used setting).

•On: The fan runs continuously.

Andere Handbücher für RTH2300 series

Inhaltsverzeichnis

Sprachen:

Andere Honeywell Thermostat Handbücher

Honeywell

Honeywell RTH7400 series Bedienungsanleitung

Honeywell

Honeywell CM727 Bedienungsanleitung

Honeywell

Honeywell RLV450 Bedienungsanleitung

Honeywell

Honeywell smartfit Bedienungsanleitung

Honeywell

Honeywell Lyric T6R Bedienungsanleitung

Honeywell

Honeywell Digital Round T8775A Bedienungsanleitung

Honeywell

Honeywell FocusPRO 5000 Bedienungsanleitung

Honeywell

Honeywell RTH9585 Wi-Fi Bedienungsanleitung

Honeywell

Honeywell DTS92A Bedienungsanleitung

Honeywell

Honeywell TL8130A1005 Bedienungsanleitung

Honeywell

Honeywell HEAT PUMP THERMOSTAT T8411R Bedienungsanleitung

Honeywell

Honeywell VisionPRO IAQ Bedienungsanleitung

Honeywell

Honeywell Lyric T6 Bedienungsanleitung

Honeywell

Honeywell CHRONOTHERM III T8611M Bedienungsanleitung

Honeywell

Honeywell T7080A Bedienungsanleitung

Honeywell

Honeywell Y87RFC Bedienungsanleitung

Honeywell

Honeywell RTH8500D - 7-Day Touchscreen Universal Programmable... Bedienungsanleitung

Honeywell

Honeywell Q682B Bedienungsanleitung

Honeywell

Honeywell RTH2510 Series Bedienungsanleitung

Honeywell

Honeywell RedLINK Bedienungsanleitung

Honeywell

Honeywell RTH8500 Series Bedienungsanleitung

Honeywell

Honeywell T4360G Bedienungsanleitung

Honeywell

Honeywell TC300 Kurzanleitung zur Einrichtung

Honeywell

Honeywell DT92A Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung

Aube Technologies

Aube Technologies TH305 Bedienungsanleitung

Powtier Controls

Powtier Controls 505MST Bedienungsanleitung

Kanmor

Kanmor Zone Control 369e Bedienungsanleitung

MICROclimate International

MICROclimate International B2 Magic Eye Bedienungsanleitung