Honeywell TRUEZONE HZ322 Bedienungsanleitung

HZ322 TrueZONE®

Zone Panel Professional Installation Guide

69-2199-05

Installation Guide

Specifications .......................................................................................................................................................... 1

Accessories ............................................................................................................................................................... 1

Mounting.................................................................................................................................................................... 2

Wiring .......................................................................................................................................................................... 3

Heat Pump ................................................................................................................................................................ 6

Basic Configuration............................................................................................................................................... 7

Advanced Configuration ..................................................................................................................................... 8

Operation................................................................................................................................................................... 9

Checkout .................................................................................................................................................................... 9

Warranty...................................................................................................................................................................10

SPECIFICATIONS

TABLE OF CONTENTS

Input Ratings:

Voltage: 1830 VAC 50/60 Hz transformer of 40 VA

or more.

Current Draw:

Zone Panel: 7.5 VA max.

THM4000R Wireless Adapter: 2 VA max.

All VA specifications at 24 VAC.

Wiring:

18 or 20-gauge solid (not stranded) wire.

Humidity Ratings:

5% to 90% RH non-condensing.

Temperature Ratings:

Shipping: 20° to 150°F (29° to 66°C)

Operating: 40° to 165°F (40° to 74°C)

Dimensions:

See below.

Emissions:

Complies with FCC Class B, part 15 requirements.

Read and save these instructions.

Need Help?

For assistance with this product please visit http://customer.honeywell.com

and/or call Honeywell Zoning Hotline toll-free at 18008288367

® U.S. Registered Trademark. US Patent No. 7,693,591; 7,904,830; 7,913,180; 7,904,830; 7,819,331; 7,766,246; 7,558,648 and other patents pending.

Fig. 1. HZ322 TrueZONE panel dimensions in in.

(mm).

M28011

1.86 (47)

8 (203)

11.5

(292)

HZ322 TrueZONE

1 69-2199—05

APPLICATION

ACCESSORIES

Table 1. Recommended Thermostats.

System Non-

Programmable

Single-

Stage

TH5110D,

TH3110D, T87N

TH8110U,

TH6110D, TH4110D

Multi-

Stage

TH5220D TH8320U, TH8321U,

TH6220D,

YTH9421C

Heat-

Pump

TH5220D

TH3210D

TH8320U

TH8321U

TH6220D

TH4210D

YTH9421C

Wire-

less*

TH5320R TH6320R

Note: All versions of the model numbers listed

above will work with the applications they're listed

for.

* For RedLINK™ wireless devices, a THM4000 is

required.

Table 2. Recommended Dampers.

Type Honeywell

Damper

Round Rectangular

Zone Spring-open/

power-closed

ARD

(8 VA)

ZD (8 VA)

Power-open/

power-closed

MARD/

RRD

(2 VA)

For recommend-

ed dampers call

the Honeywell

Zoning Hotline at

18008288367.

Bypass Static pres-

sure regulat-

ing damper

SPRD/

MARD

(2 VA)

SPRD

Table 3. Recommended Commercial Dampers.*

Type Actuation Round Rectangular

Zone Power-open/

power-closed

MARD D2 or D3 with

ML6161A2009*

Bypass Power-open/

power-closed

MARD

with

SPC

D3 with

ML6161B2024*

and SPC

* Or equivalent damper and actuator.

Table 4. Maximum Dampers.*

Ambient Temp. Maximum Damper VA per Zone

100°F (38°C) 28.8

160°F (71°C) 16.8

* Use an SDCR (Slave Damper Control Relay) for addi-

tional dampers.

Maximum dampers per panel is limited by transform-

er size.

Ensure transformer is large enough to power the

panel (7.5 VA) and dampers.

Table 5. Accessories.

Accessory Description

40 VA transformer* AT140A1042*

75 VA transformer AT175A1008

Discharge Air

Temperature Sensor *

DATS C7735A1000*

SDCR** Slave Damper Control

Relay

Wireless Adapter*** THM4000R1000

Wireless Outdoor Air

Temperature Sensor***

C7089R1013

Portable Comfort

Control***

REM5000R1001

RedLINK Internet

Gateway***

THM6000R1002

* Included in HZ322K kit.

** Use an SDCR (Slave Damper Control Relay) to

add additional dampers to a zone to surpass the

maximum Damper VA rating per Zone.

*** For RedLINK™ wireless devices, a THM4000 is

required.

The HZ322 TrueZONE®panel controls:

• Conventional gas, oil, or electric forced-air systems up to 2 stages heat and cool;

• Heat pump systems with single stage compressor and auxiliary heat, and two stage heat pumps with no

auxiliary heat; and two stage heat pumps with no auxiliary heat;

• 2 or 3 forced-air zones with wired thermostats, or wireless thermostats using THM4000R wireless adapter.

Please refer to TrueZONE Panel Frequently Asked Questions form 509694 for operating details.

http://customer.honeywell.com

Installation Guide

69-2199—05 2

M28029

Mount the HZ322 TrueZONE panel near the HVAC

equipment; locate it on a wall, stud, roof truss, or cold-

air return.

NOTE: The HZ322 TrueZONE panel can be mounted

in any orientation; level it for appearance only.

2Separate the zone panel cover from the base, and use the base as a template to drill mounting holes.

Attach the base to the wall, stud, roof truss, or duct with appropriate screws (not included).

Use two screws for attaching to a stud or roof truss, or

four screws for duct or drywall/plaster installations.

Fig. 2

Fig. 3

SUPPLY

DUCT

DATS

(AT LEAST 3 FT

FROM PLENUM)

DATS

(ALTERNATE

LOCATION)

ueZONE PANEL

MOUNTED ON

RETURN DUCT TrueZONE PANEL

MOUNTED ON WAL

ZD SERIES

ZONE DAMPERS

SPRD BYPASS

DAMPER

FURNACE OR

AIR CONDITIONER M24738

MOUNTING

HZ322 TrueZONE

3 69-2199—05

WIRING

Follow these steps for wiring all systems. However, wiring will vary depending on equipment. For conventional sys-

tems, refer to page 5. For heat pump systems, see page 6.

Wiring must comply with applicable codes, ordinances, and regulations. Use the following wiring diagrams to wire

the zone panel to the thermostats and dampers.

The HZ322 offers many innovations for wire management and organization: wires can be run

behind the panel, through wire channels on its sides, and must be attached to a wiring anchor

with a cable tie.

M24743

Install thermostats using instructions provided with thermostats.

Connect thermostat to zone panel. To connect wire to the panel, strip

approximately 1/4 in. of insulation and push wire into terminal. To

release wire, press the button on top of the terminal.

In retrofit applications, trim end of wire if not straight.

Install dampers using instructions provided with dampers.

Connect dampers to zone panel.

NOTE: Multiple dampers can be wired in parallel.

M28023

W1/E

O/B

ZONE 3

DAMPER

THERMOSTAT

CAUTION: Voltage Hazard.

Can cause electrical shock or equipment damage. Disconnect power before beginning installation.

Wire entire panel before applying transformer power.

Fig. 4

Fig. 5

Fig. 6

M24920

ARD OR ZD DAMPER SPRING-OPEN POWER-CLOSED

ZONE 3

DAMPER

ZONE 1

DAMPER

RRD OR MARD DAMPER POWER-OPEN POWER-CLOSED

M4 OPEN

M6 CLOSED

M1 COMMON

ARD OR ZD DAMPER SPRING-OPEN POWER-CLOSED

ZONE 2

DAMPER

Installation Guide

69-2199—05 4

The DS/BK terminal is used with a variable-speed fan. If

the HVAC equipment has a DS, BK, ODD, or DHUM ter-

minal, wire that terminal to the HZ322 DS/BK terminal.

When 2 or 3 zones are calling for cooling this terminal

will be energized which will run the blower fan at the

normal speed. When only 1 zone is calling for cooling

the fan runs at a reduced speed which will require less

air to be by-passed. Refer to HVAC equipment manufac-

turer instructions.

For oil heat with a separate transformer for cooling,

remove this jumper. For other systems leave jumper

in place and wire to HVAC R terminal with 18 gauge

solid wire.

Connect DATS as shown.

For the placement of DATS in supply duct and

troubleshooting assistance with the DATS, see the Discharge

Air Temperature Installation Instructions Form Number

69 1521.

Connect equipment as shown here and on page 5 and 6.

C7735A1000

M28024

SENSOR

DATS

8Connect a dedicated transform-

er as shown.

DEDICATED

TRANSFORMER

M24806

POWER

(HOT)

W1/E

DS/BK

M28025

HVAC

FAN RELAY

24 VOLT TRANS.

COMPRESSO

RELAY

EQUIPMENT

WIRING

Fig. 7

Fig. 8

Fig. 10

When a wireless thermostat, Portable Comfort Control,

wireless outdoor air temperature sensor, or other

RedLINK™ wireless device is used, wire the THM4000

Wireless Adapter Module to the ABCD terminals on the

zone panel.

CAUTION: Do not wire the ABCD terminals of the THM5320R Wireless Equipment Interface

Module to the ABCD terminals on the HZ322 zone control panel. Doing so will damage the

components.

M28193

WIRELESS

ADAPTER

WIRELESS

CONNECT

POWER

THM4000R

CONNECTED

WIRELESS SETUP

Fig. 9

HZ322 TrueZONE

5 69-2199—05

M4 OPEN

M6 CLOSED

M1 COMMON

M28208

1 ABCD TERMINALS FOR THE THM4000R WIRELESS ADAPTER ONLY

NEVER WIRE A THM5320R WIRELESS EIM TO THESE TERMINALS

(HOT)

HVAC

FAN RELAY

24 VOLT TRANS.

C7735A1000

DATS

DEDICATED

TRANSFORMER

ARD OR ZD DAMPER SPRING-OPEN POWER-CLOSED

ARD OR ZD DAMPER SPRING-OPEN

POWER-CLOSED

RRD OR MARD DAMPER POWER-OPEN

POWER-CLOSED

COMPRESSOR

RELAY

W1/E

DS/BK

HZ322

HEAT 1

HEAT 2

COOL 1

COOL 2

FAN

PURGE

EM HEAT

ZONE 1

ZONE 2

ZONE 3

EMERGENCY

HEAT

W1/E

O/B

ZONE 1

DAMPER

THERMOSTAT

W1/E

O/B

ZONE 2

DAMPER

THERMOSTAT SENSOR

DATS

EQUIPMENT

POWER

W1/E

O/B

ZONE 3

DAMPER

THERMOSTAT

WIRELESS

ADAPTER

WIRELESS

CONNECT

POWER

THM4000R

CONNECTED

WIRELESS SETUP

CONVENTIONAL

The following diagram is an overall view of wiring for a conventional system as depicted in steps 38.

Fig. 11. Zone panel wiring—conventional.

Installation Guide

69-2199—05 6

HEAT PUMP

Fig. 12. Zone panel wiring—heat pump with electric auxiliary heat.

Use the following diagram for wiring a heat pump with electric auxiliary heat.

NOTE: You can use a conventional thermostat for a heat pump system; however, em heat can only be controlled by

heat pump thermostats. The diagram below shows a heat pump thermostat used with a heat pump system.

AUX

O/B

AUX

O/B

AUX

O/B

1ALTERNATIVELY LABELED W2 ON SOME THERMOSTATS.

2FOR THERMOSTATS WITH SEPARATE O AND B TERMINALS,

ATTACH O FOR COOL CHANGEOVER OR ATTACH B

FOR HEAT CHANGEOVER.

3IF HVAC EQUIPMENT USES THE SAME SOURCE OF HEAT FOR

AUXILIARY AND EMERGENCY HEAT, JUMPER W1/E AND W2.

4ABCD TERMINALS FOR THE THM4000R WIRELESS ADAPTER ONLY NEVER

WIRE A THM5320R WIRELESS EIM TO THESE TERMINALS

M4 OPEN

M6 CLOSED

M1 COMMON

M28020

(HOT)

AIR

HANDLER

FAN RELAY

EM. HEAT

AUX. HEAT

24 VOLT TRANS.

C7735A1000

DATS

HEAT PUMP

DEDICATED

TRANSFORMER

ARD OR ZD DAMPER SPRING-OPEN POWER-CLOSED

ARD OR ZD DAMPER SPRING-OPEN

POWER-CLOSED

RRD OR MARD DAMPER POWER-OPEN

POWER-CLOSED

REVERSING VALVE

W1/E

DS/BK

HZ322

HEAT 1

HEAT 2

COOL 1

COOL 2

FAN

PURGE

EM HEAT

ZONE 1

ZONE 2

ZONE 3

EMERGENCY

HEAT

W1/E

O/B

ZONE 1

DAMPER

THERMOSTAT

W1/E

O/B

ZONE 2

DAMPER

THERMOSTAT SENSOR

DATS

EQUIPMENT

POWER

W1/E

O/B

ZONE 3

DAMPER

THERMOSTAT

WIRELESS

ADAPTER

WIRELESS

CONNECT

POWER

THM4000R

CONNECTED

WIRELESS SETUP

HZ322 TrueZONE

7 69-2199—05

CONFIGURATION

To enter Configuration:

HOMEWIRELESS

MODE

BACK NEXT

CONFIG

CHECK OUT

ADJUST SETTING

M24799

1Press the Mode button (the Config LED will

light up).

HOME

MODE

BACK NEXT

CONFIG

CHECK OUT

ADJUST SETTING

M24810

WIRELESS

Use the Back and Next buttons to navi-

gate through the configuration settings.

Scroll through the selection choices by

using the "Adjust Setting" Left and Right

arrow buttons. Pressing Next enters the

selected option for that menu item and

advances to the next menu.

SYSTEM TYPE

[CONV] HEATPUMP

COOL STAGES

0 [1] 2

CONVENTIONAL HEATPUMP

HEAT STAGES

0 [1] 2

RF ENABLED

[YES] NO

ASKS THIS FOR EVERY WIRED ZONE.

OPTIONS: HTPUMP-O FOR HEAT PUMP

THERMOSTATS USING O FOR CHANGEOVER,

HTPUMP-B FOR HEAT PUMP THERMOSTATS

USING B FOR CHANGEOVER, AND

CONVENTIONAL FOR CONVENTIONAL,

NON-HEAT PUMP THERMOSTATS

OPTIONS: TSTAT,

TIMER, % ZONES, OFF

ADVANCED CONFIG

[NO] YES

SAVE CHANGES

[NO] YES

COMPRESSOR STAGES

[1] 2

AUX HT ENABLED

[YES] NO

SET TO “YES” IF WIRELESS (RADIO FREQUENCY) THERMOSTATS AND THM4000R ADAPTER ARE USED.

YES

OPTIONS: 1, 2, 3 ZONES INSTALLED

[3] OPTIONS: 1, 2, 3

SKS THIS FOR EVERY ZONE.

ZONES INSTALLED

[3]

“YES” ALLOWS YOU TO VIEW/CHANGE THE ADVANCED

CONFIGURATION OPTIONS SHOWN ON PAGE 8.

SHOWN IF COMPRESSR STAGES OR HEAT STAGES IS SET TO 2, OR AUX HT ENABLED IS SET TO “YES”

RF MEANS "WIRELESS THERMOSTAT"

STAGE 2 CONTROL

[OFF]

PANEL WILL NOT ASK IF YOU HAVE AUX HEAT WHEN 2 COMPRESSOR STAGES ARE SELECTED. THE HZ432 IS REQUIRED FOR A 3H/2C HEAT-PUMP

ZONE 1 TSTAT TYPE

[RF] WIRED

ZONE 1 TSTAT TYPE

[HTPUMP-O]

WIRED

M28027A

The flow chart below illustrates basic zone panel configuration. For additional configuration, see

Advanced Configuration on page 8. The label on the inside cover of the HZ322 Zone Panel also con-

tains configuration information.

Fig. 13

Fig. 14

Installation Guide

69-2199—05 8

ADVANCED CONFIGURATION

Table 6. Advanced Configuration.

Menu Name Menu Title (LCD

top line)

Menu Options (LCD bottom

line; defaults in bold)

Menu option description Notes:

Heat Fan HEAT FAN

CONTROL

[HVAC] PANEL Fan control by HVAC In heat mode, fan controlled by HVAC or

turned on by panel in call for heat.

HVAC [PANEL] Fan control by Panel

Stage 2 Timer STAGE 2 TIMER [5 MIN] > – < [60 MIN]

[5 MIN] >

5 minutes60 minutes Number of minutes to delay before engaging

second stage.

Purge Timer PURGE TIME [2] 3.5 5 MIN 2.0 minutes Number of minutes panel will purge following

call for heat or cool.

2 [3.5] 5 MIN 3.5 minutes

2 3.5 [5] MIN 5.0 minutes

Purge Fan FAN IN PURGE [HVAC] PANEL Fan control by HVAC Fan controlled by HVAC or panel during purge.

HVAC [PANEL] Fan control by Panel

Purge Dampers PURGE DAMPERS [UNCHANGD] OPEN Dampers Unchanged Damper position unchanged or all dampers

open during purge.

UNCHANGD [OPEN] Dampers All Open

Auto Changeover Delay CHANGEOVER

DELAY

[15] 20 30 MIN 15 minutes auto changeover timer Number of minutes to delay auto changeover

when one zone is calling for heat and another

is calling for cooling.

15 [20] 30 MIN 20 minutes auto changeover timer

15 20 [30] MIN 30 minutes auto changeover timer

DATS Enabled DISCHARGE

SENSOR

[NO] YES Disabled Enables or disables DATS. If Disabled, the

Multistage DATS Inhibit setting is Disabled.

NO [YES] Enabled

DATS High Limit DAT HIGH LIMIT [110 F] > – < [180 F]

< [160 F] >

110 deg F180 deg F High temperature limit.

DATS Low Limit DAT LOW LIMIT [30 F] > – < [60 F]

< [40 F] >

30 deg F60 deg F Low temperature limit.

OT Temp Enabled* OT SENSOR [NO] YES Disabled Enables or disables wireless outdoor tempera-

ture sensor. If Disabled, the Multistage OT

Temp Lockout setting is Disabled.

NO [YES] Enabled

OT Trip Point for

Multistage Lockout

OT LOCKOUT

TEMP

[0 F] > – < [50 F]

< [50 F] >

0 deg F50 deg F Above this temperature 2nd stage heat is

locked out.

Multistage DATS

Inhibit

DAT MSTG INHIBIT NO [YES] Enabled Allow panel to downstage multistage equip-

ment when near DATS high or low limit.

[NO] YES Disabled

LCD Contrast Adjust LCD CONTRAST [1] > – < [10]

< [5] >

Contrast value 110 Sets LCD display contrast for ease of viewing.

Lowest contrast is 1, highest contrast is 10.

Save Changes SAVE CHANGES? [NO] YES Disabled Saves or rejects the configuration settings.

NO [YES] Enabled

Use the Adjust Setting, Next, and Back buttons to configure the zone panel. See the Configuration section on page

7 for instructions on using these buttons.

* Used only if Wireless Adapter THM4000R and Wireless Outdoor Sensor C7089R are used.

Press the Mode button until the Wireless LED lights

up. The TrueZONE must be configured for wireless

devices to select Wireless mode.

CONNECT WIRELESS DEVICES

HOME

MODE

BACK NEXT

CONFIG

CHECK OUT

ADJUST SETTING

M28194

WIRELESS

Press Next to add devices.

While the display alternates the Press Connect and

Exit screens, push the Connect button(s) on the

wireless device(s).

OR

Follow the instructions that came with the wireless

device(s).

Press Next to exit. Fig. 15

Andere Handbücher für TRUEZONE HZ322

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Honeywell Thermostat Handbücher

Honeywell

Honeywell Lyric T6 Bedienungsanleitung

Honeywell

Honeywell RTH7400 series Bedienungsanleitung

Honeywell

Honeywell MagicStat CT3300 Technische Daten

Honeywell

Honeywell FocusPRO TH6320WF1005 Bedienungsanleitung

Honeywell

Honeywell TH2210DV Bedienungsanleitung

Honeywell

Honeywell ST9400C Bedienungsanleitung

Honeywell

Honeywell FocusPRO TH6110D Bedienungsanleitung

Honeywell

Honeywell Tradeline Chronotherm IV Bedienungsanleitung

Honeywell

Honeywell RTHL2410 series Bedienungsanleitung

Honeywell

Honeywell Smart Series Bedienungsanleitung

Honeywell

Honeywell TH3110D1008 - Digital Thermostat, 1h Bedienungsanleitung

Honeywell

Honeywell Inncom E527 Bedienungsanleitung

Honeywell

Honeywell Round CT87A Bedienungsanleitung

Honeywell

Honeywell CT3611 Benutzerhandbuch

Honeywell

Honeywell CT3200 series Benutzerhandbuch

Honeywell

Honeywell TL8230A Bedienungsanleitung

Honeywell

Honeywell T6 Pro Z-Wave Bedienungsanleitung

Honeywell

Honeywell FocusPRO Wi-Fi TH6000 Series Bedienungsanleitung

Honeywell

Honeywell T9 Bedienungsanleitung

Honeywell

Honeywell WebStat T7351F Benutzerhandbuch

Honeywell

Honeywell TH8110U1003 - VisionPro Thermostat Bedienungsanleitung

Honeywell

Honeywell CM900 Bedienungsanleitung

Honeywell

Honeywell PCR-100 Bedienungsanleitung

Honeywell

Honeywell CM701 Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung

Aube Technologies

Aube Technologies TH305 Bedienungsanleitung

Powtier Controls

Powtier Controls 505MST Bedienungsanleitung

Kanmor

Kanmor Zone Control 369e Bedienungsanleitung

MICROclimate International

MICROclimate International B2 Magic Eye Bedienungsanleitung