Honeywell VisionPRO IAQ Bedienungsanleitung
Operating Manual
Mode d’emploi
Manual de Uso
VisionPRO® IAQ
Total Home Comfort System
69-1815EFS-08
Read and save these instructions.
Need Help?
For assistance with this product please visit http://yourhome.honeywell.com
or call Honeywell Customer Care toll-free at 1-800-468-1502
® U.S. Registered Trademark.
US Patent No. 6,208,263; 6,373,376; 6,448,901; 6,595,430;
7,012,927; 7,044,397; D509151 and other patents pending.
Copyright © 2011 Honeywell International Inc. All rights reserved.
BE CAREFUL! Never use sharp instruments, such as a pencil
or pen, to press touchscreen keys. To prevent damage to the
thermostat, always press keys with your fingertip.
This thermostat contains a Lithium battery which may contain
Perchlorate material.
Perchlorate Material—special handling may apply,
See www.dtsc.ca.gov/hazardouswaste/perchlorate.
VisionPRO® IAQ
1 69-1815EFS—08
About your new thermostat
Programming at a glance ..................... 2
Quick reference to controls .................. 3
Quick reference to status display ........ 4
Programming & Operation
Clock setting.......................................... 5
Fan setting............................................. 6
System setting....................................... 7
Energy saving default schedule ........... 8
Using program schedules..................... 9
Program schedule overrides .............. 10
Vacation hold....................................... 12
Special features................................... 13
Screen lock.......................................... 14
Screen cleaning................................... 15
Optional remote sensors .................... 16
Humidity control .................................. 17
Ventilation control................................ 19
Appendices
Advanced functions ............................ 20
In case of difficulty.............................. 27
Limited warranty.................................. 29
This thermostat is ready to go!
Your new thermostat is pre-
programmed and ready to go.
See page 2 to check settings.
Table of contents
CAUTION: EQUIPMENT DAMAGE
HAZARD. To prevent possible
compressor damage, do not oper-
ate cooling system when outdoor
8)14)6%896)-7&)03;¶±Å©²±Åª¯
Operating Manual
69-1815EFS—08 2
About your new thermostat
Your new thermostat is pre-programmed and ready to go. Just set the time and day.
Then check the settings below and change if needed:
1. Set clock........................................................................................................See page 5
2. Select fan setting: Preset to Auto..............................................................See page 6
3. Select system setting: Preset to Heat ......................................................See page 7
4. Program schedules: Preset to energy-saving levels
;,-0)=39¨6)%8;36/36%70))4©%7791)7=39
wake at 6 am, leave at 8 am, return at 6 pm
%2(+383&)(%8²±41ª........................................................................ See pages 8-11
5. Set humification, dehumidification
& ventilation controls, if applicable............................................... See pages 17-19
ONE-TOUCH TEMP CONTROL: You can override the program schedule at any time,
%2(1%29%00=%(.9788,)8)14)6%896)©7))4%+)7²±®²²ª¯
VisionPRO® IAQ
3 69-1815EFS—08
6)77(%=©7ª837)8463+6%17',)(90)©7))4%+)ºª
Press to select fan
34)6%8-32©7))4%+)·ª
Press to select system
8=4)©7))4%+)¸ª
Press to set program
7',)(90)©7))4%+)ºª
Press to adjust
temperature settings
©7))4%+)7º®²²ª
Press for more options
Press to override
program schedule
©7))4%+)7²±®²²ª
Press to set clock
©7))4%+)¶ª
Press to lock keypad for 30
seconds to clean screen
©7))4%+)²µª
SCHED HOLD CLOCK SCREEN MORE
MON TUE WED THU FRI SAT SUN
AM
FAN
AUTO
SYSTEM
HEAT
Following
Schedule
Inside Set To
OK TO PICK MULTIPLE DAYS
70
6:01
70
Quick reference to controls
Operating Manual
69-1815EFS—08 4
Current inside temperature Current day of week Temperature setting
Program schedule on
©(3)7238(-740%=
;,)23**ª
Adaptive Intelligent
Recovery in effect
©7))4%+)²´ª
27-(),91-(-8=©*
an outdoor sensor is
installed, the outdoor
temperature is shown
instead of the humidity
level. Press MORE to dis-
40%=8,),91-(-8=0):)0¯ª
Fan setting
Other display messages:
s#OOL/NCooling system is activated
s(EAT/NHeating system is activated
s!UX(EAT/NAuxiliary heating system is activated
s7AIT3146)77364638)'8-32%'8-:%8)(©7))4%+)²´ª
s3CREEN,OCKEDSee page 26 to unlock
SCHED HOLD CLOCK SCREEN MORE
WED
AM
FAN
AUTO
SYSTEM
HEAT
Following
Schedule
Inside Set To
Recovery
Humidity
70
6:01
70
55
Quick reference to status display
System setting
Current time
VisionPRO® IAQ
5 69-1815EFS—08
To set the current time display, press CLOCK,
then press Vor Wto adjust the time. Press
and hold Vor Wto advance the time more
quickly.
Press DONE837%:)§)<-8©3646)77CANCEL to
)<-8;-8,398',%2+-2+8,)8-1)ª¯
Note: The real-time clock should never require
adjustment since it automatically updates for
daylight savings time, and stores all date/time
information.
Note: To change the current week day display, see
page 21.
Press CLOCK
Adjust time, then press DONE
SCHED HOLD CLOCK SCREEN MORE
AM
6:01
DONE CANCEL
AM
6:02
Clock setting
Operating Manual
69-1815EFS—08 6
Press FAN to select fan operation, then press
DONE:
W On: Fan is always on.
W Auto: Fan runs only when the heating or
cooling system is on.
W Circ: Fan runs randomly, about 35% of the
time, not counting any run time with the
heating or cooling system.
You can press FAN to override the fan settings
you’ve programmed for different time periods
©7))4%+)ºª¯*=397)0)'8On or Circ, the
setting you select will remain active until you
press FAN again to select Auto, and return
838,)*%27',)(90)©7))4%+)³¹*36136)
-2*361%8-32ª¯
Note: If a fan schedule is programmed,
“Auto” will run the fan schedule.
Press FAN
SCHED HOLD CLOCK SCREEN MORE
WED
AM
SYSTEM
HEAT
Following
Schedule
Inside Set To
70
6:01
70
FAN
AUTO
Fan setting
VisionPRO® IAQ
7 69-1815EFS—08
Press SYSTEM
SCHED HOLD CLOCK SCREEN MORE
WED
AM
Following
Schedule
Inside Set To
70
6:01
70
FAN
AUTO
SYSTEM
HEAT
Press the SYSTEM button to select, then press
DONE:
W Heat: Thermostat controls only the
heating system.
W Cool: Thermostat controls only the
cooling system.
W Off: Heating and cooling systems are off.
W Auto: Thermostat automatically selects
heating or cooling depending on the
indoor temperature.
W Em Heat©320=*36,)%849147;-8,
%9<-0-%6=,)%8ª»,)61378%8'3286307
Auxiliary Heat. Compressor is not used.
System setting
Operating Manual
69-1815EFS—08 8
It’s easy to program your system for maximum energy savings. You can program four
time periods each day, with different settings for each day.
This thermostat is pre-set with energy-saving program settings. We recommend these
settings, since they can reduce your heating/cooling expenses by as much as 33%.
©))2)<84%+)83%(.9788-1)7%2(8)14)6%896)73*)%',8-1)4)6-3(¯ª
7AKE©·»±±%1ª
Leave
©¹»±±%1ª
Return
©·»±±41ª
Sleep
©²±»±±41ª
Cool ©32®6-ªHeat ©32®6-ª Heat ©%8®92ª Cool ©%8®92ª
° ° ° °
° ° °
[Or cancel period]
°
[Or cancel period]
° ° °
[Or cancel period]
°
[Or cancel period]
° ° ° °
%NERGYSAVINGSETTINGSFORMAXIMUMCOSTSAVINGS
Andere Handbücher für VisionPRO IAQ
4
Inhaltsverzeichnis
Andere Honeywell Thermostat Handbücher
Honeywell
Honeywell VisionPRO Series Bedienungsanleitung
Honeywell
Honeywell RET93E Series Bedienungsanleitung
Honeywell
Honeywell CM900 Bedienungsanleitung
Honeywell
Honeywell RTH1100 series Bedienungsanleitung
Honeywell
Honeywell MagicStat /28 Bedienungsanleitung
Honeywell
Honeywell T8424C1042 Kurzanleitung
Honeywell
Honeywell PRO TH3210D Bedienungsanleitung
Honeywell
Honeywell RTH2510Series Bedienungsanleitung
Honeywell
Honeywell INNCOM e7w Bedienungsanleitung
Honeywell
Honeywell RF CM61NG Bedienungsanleitung
Honeywell
Honeywell RTH7400 series Bedienungsanleitung
Honeywell
Honeywell DT90E Bedienungsanleitung
Honeywell
Honeywell VisionPRO 8000 Bedienungsanleitung
Honeywell
Honeywell LP907A Bedienungsanleitung
Honeywell
Honeywell Q539A Bedienungsanleitung
Honeywell
Honeywell FocusPRO TH6110D Bedienungsanleitung
Honeywell
Honeywell T8601 Montage- und Bedienungsanleitung
Honeywell
Honeywell ATC928G3000 Bedienungsanleitung
Honeywell
Honeywell smartfit Bedienungsanleitung
Honeywell
Honeywell TheraPro HR90 Bedienungsanleitung
Beliebte Thermostat Handbücher anderer Marken
EWELLY
EWELLY EW-181 Bedienungsanleitung
Prolon
Prolon T1100 Montageanleitung
Computherm
Computherm Q20 Bedienungsanleitung
Heatmiser
Heatmiser neoStat Bedienungsanleitung
Aube Technologies
Aube Technologies TH111GFCI-NP 240 VCA Bedienungsanleitung
Mars
Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung
Sinope
Sinope TH1300RF Bedienungsanleitung
NuTone
NuTone NTBZ48 Original Betriebsanleitung
Stelpro
Stelpro MAESTRO ASMT402AD Bedienungsanleitung
Aube Technologies
Aube Technologies TH305 Bedienungsanleitung
Powtier Controls
Powtier Controls 505MST Bedienungsanleitung
Kanmor
Kanmor Zone Control 369e Bedienungsanleitung