Honeywell VisionPRO TH8000 Series Bedienungsanleitung

Operating Manual

VisionPRO® TH8000 Series

Touchscreen Programmable Thermostat

69-1894EFS-03

69-1894EFS—03

ENGLISH

Read and save these instructions.

Need Help?

For assistance with this product please visit http://yourhome.honeywell.com

or call Honeywell Customer Care toll-free at 1-800-468-1502

® U.S. Registered Trademark.

US Patent No. 6595430, D509151 and other patents pending.

BE CAREFUL! Never use sharp instruments, such as a pencil

or pen, to press touchscreen keys. To prevent damage to the

thermostat, always press keys with your fingertip.

This thermostat contains a Lithium battery which may contain Perchlorate material.

Perchlorate Material—special handling may apply,

See www.dtsc.ca.gov/hazardouswaste/perchlorate

This manual covers the following models

TH8110U : For 1 Heat/1 Cool systems

TH8320U: For up to 3 Heat/2 Cool systems

TH8321U: For up to 3 Heat/2 Cool systems with dehumidification

(Pull thermostat from wallplate and turn over to find model number)

M29343

169-1894EFS—03

ENGLISH

About your new thermostat

Thermostat features.............................. 2

Programming at a glance ..................... 3

Quick reference to controls .................. 4

Quick reference to status display ........ 5

Programming & Operation

Clock setting.......................................... 6

Fan setting............................................. 7

System setting....................................... 8

Using program schedules..................... 9

Program schedule overrides .............. 12

Vacation hold....................................... 14

Special features................................... 15

Screen lock.......................................... 16

Screen cleaning................................... 17

Humidity display & control.................. 18

Appendices

Battery replacement............................ 20

Advanced functions ............................ 21

In case of difficulty.............................. 26

Optional remote sensors .................... 28

Limited warranty.................................. 29

This thermostat is ready to go!

Your new thermostat is pre-

programmed and ready to go.

See page 3 to check settings.

Table of contents

CAUTION: EQUIPMENT DAMAGE

HAZARD. To prevent possible

compressor damage, do not oper-

ate cooling system when outdoor

temperature is below 50˚F (10˚C).

VisionPRO® TH8000 Series

Operating Manual

About your new thermostat

69-1894EFS—03

ENGLISH

Congratulations! You’ve just purchased the world’s most advanced, easy-to-use ther-

mostat. It has been designed to give you many years of reliable service and touch-

screen climate control.

Features

• 7-day program schedules maximize comfort and economy.

• Armchair programming: Just pull thermostat from the wall to set schedules.

• Energy-saving settings for maximum cost savings.

• One-touch temp control overrides program schedule at any time.

• Precise comfort control keeps temperature within 1°F of the level you set.

• Change/check reminders let you know when to service or replace filters,

batteries and other critical components.

• Large touchscreen display with backlight is easy to read—even in the dark.

• Select models display and control summer humidity.

• Select models accommodate optional outdoor or indoor remote sensors.

VisionPRO®TH8000 Series

About your new thermostat

69-1894EFS—03

ENGLISH

Your new thermostat is pre-programmed and ready to go. Just set the time and day.

Then check the settings below and change if needed:

1. Set clock........................................................................................................See page 6

2. Select fan setting: Preset to Auto..............................................................See page 7

3. Select system setting: Preset to Heat ......................................................See page 8

4. Program schedules: Preset to energy-saving levels

while you’re at work or asleep (assumes you

wake at 6 am, leave at 8 am, return at 6 pm

and go to bed at 10 pm).......................................................................See pages 10-13

ONE-TOUCH TEMP CONTROL: You can override the program schedule at any time,

and manually adjust the temperature (see pages 12-14).

This thermostat is ready to go!

Operating Manual

69-1894EFS—03

ENGLISH

SCHED HOLD CLOCK SCREEN MORE

MON TUE WED THU FRI SAT SUN

FAN

AUTO

SYSTEM

HEAT

Following

Schedule

Inside Set To

OK TO PICK MULTIPLE DAYS

6:01

M29344

Press day(s) to set program schedule (see page 11)

Press to select fan

operation (see page 7)

Press to select system

type (see page 8)

Press to set program

schedule (see page 11)

Press to adjust

temperature settings

(see pages 11-14)

Press for more options

(select models only)

Press to override

program schedule

(see pages 12-14)

Press to set clock

(see page 6)

Press to lock keypad for 30

seconds to clean screen

(see page 17)

Quick reference to controls

VisionPRO®TH8000 Series

569-1894EFS—03

ENGLISH

SCHEDHOLD CLOCKSCREEN MORE

WED

FAN

AUTO

SYSTEM

HEAT

Following

Schedule

Inside Set To

Recovery

6:01

M29345

Current inside temperature Current day of week Temperature setting

Program schedule on

(does not display

when off)

Fan setting

Other display messages:

• Cool On: Cooling system is activated

• Heat On: Heating system is activated

• Aux Heat On: Auxiliary heating system is activated

Quick reference to status display

System setting

Current time

Adaptive Intelligent

Recovery in effect

(see page 15)

Operating Manual

69-1894EFS—03

ENGLISH

DONE CANCEL

6:02

M29347

SCHED HOLD CLOCK SCREEN MORE

6:01

M29346

To set the current time display, press CLOCK,

then press s or t to adjust the time. Press

and hold s or t to advance the time more

quickly.

Press DONE to save & exit (or press CANCEL to

exit without changing the time).

Note: The real-time clock should never require

adjustment since it automatically updates for

daylight savings time, and stores all date/time

information.

Note: To change the current week day display, see

page 22.

Press CLOCK

Adjust time, then press DONE

Clock setting

VisionPRO®TH8000 Series

769-1894EFS—03

ENGLISH

SCHEDHOLDCLOCK SCREEN MORE

WED

SYSTEM

HEAT

Following

Schedule

Inside Set To

6:01

FAN

AUTO

M29348

Press FAN to select fan operation, then press

DONE.

• On: Fan is always on.

• Auto: Fan runs only when the heating or

cooling system is on.

• Circ: Fan runs randomly, about 35% of the

time, not counting any run time with the

heating or cooling system.

You can press FAN to override the fan settings

you’ve programmed for different time periods

(see page 11). If you select On or Circ, the

setting you select will remain active until you

press FAN again to select Auto (see page 27

for more information).

Press FAN

Fan setting

Note: If a fan schedule is programmed,

“Auto” will run the fan schedule.

Operating Manual

69-1894EFS—03

ENGLISH

Press the SYSTEM button to select, then press

DONE.

• Heat: Thermostat controls only the

heating system.

• Cool: Thermostat controls only the

cooling system.

• Off: Heating and cooling systems are off.

• Auto: Thermostat automatically selects

heating or cooling depending on the

indoor temperature.**

• Em Heat (only for heat pumps with

auxiliary heat): Thermostat controls

Emergency and Auxiliary Heat.

Compressor is locked out.**

** Select models only

System setting

SCHED HOLD CLOCKSCREEN MORE

WED

Following

Schedule

Inside Set To

6:01

FAN

AUTO

SYSTEM

HEAT

M29349

Andere Handbücher für VisionPRO TH8000 Series

Inhaltsverzeichnis

Andere Honeywell Thermostat Handbücher

Honeywell

Honeywell PRO 2000 Series Bedienungsanleitung

Honeywell

Honeywell Tradeline T8511G Bedienungsanleitung

Honeywell

Honeywell Easy-To-See T87N1000 Bedienungsanleitung

Honeywell

Honeywell TRADELINE R8184G Leitfaden

Honeywell

Honeywell RF CM61NG Bedienungsanleitung

Honeywell

Honeywell VisionPRO 8000 Bedienungsanleitung

Honeywell

Honeywell T8624D Bedienungsanleitung

Honeywell

Honeywell RTH7600 Series Bedienungsanleitung

Honeywell

Honeywell TROL-A-TEMP T874A Bedienungsanleitung

Honeywell

Honeywell T8602A2055 Systemhandbuch

Honeywell

Honeywell FocusPRO Wi-Fi TH6000 Series Bedienungsanleitung

Honeywell

Honeywell T7200D Bedienungsanleitung

Honeywell

Honeywell T8621A Bedienungsanleitung

Honeywell

Honeywell L641AI039 Bedienungsanleitung

Honeywell

Honeywell Prestige 2.0 IAQ Bedienungsanleitung

Honeywell

Honeywell VisionPRO Series Bedienungsanleitung

Honeywell

Honeywell FocusPRO TH5110D Bedienungsanleitung

Honeywell

Honeywell WebStat T7350 Benutzerhandbuch

Honeywell

Honeywell T10 Pro Smart Bedienungsanleitung

Honeywell

Honeywell VisionPRO IAQ Bedienungsanleitung

Honeywell

Honeywell TB6575B1000/U - SuitePro Digital Fan Coil... Bedienungsanleitung

Honeywell

Honeywell Chronotherm CM31 Bedienungsanleitung

Honeywell

Honeywell TH8320R1003 Bedienungsanleitung

Honeywell

Honeywell CT3611 Benutzerhandbuch

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung

Aube Technologies

Aube Technologies TH305 Bedienungsanleitung

Powtier Controls

Powtier Controls 505MST Bedienungsanleitung

Kanmor

Kanmor Zone Control 369e Bedienungsanleitung

MICROclimate International

MICROclimate International B2 Magic Eye Bedienungsanleitung