Hotone Binary Amp Bedienungsanleitung
Binary Amp Owner's Manual
DESIGN INSPIRAT I O N
Congratulations on your new Hotone Binary pedal! You have just added some serious power to your pedalboard.
The Binary series lets loose versatile pro effects in compact cases. A dual-DSP powered platform and CDCM modeling
system ensure a realistic playing experience, dual-footswitch design and variable I/Os make it easy to use, and an OLED
screen offers clear, detailed display.
Binary Amp is an amp simulator delivering precise classic amp sounds along with high quality cab simulators, and a built-in
FX loop lets you expand your own sound.
Welcome
DESIGN INSPIRAT I O N
✪ Grown out of next-gen XTOMP technology
✪ Compact, easy-to-use dual footswitch amp simulator pedal
✪ Advanced CDCM modeling system ensures realistic playing experience
✪ Dual DSP-powered platform ensures high sound quality
✪ 24-bit A/D/A conversion, up to 110dB S/N ratio
✪ 16 CDCM powered legendary amp models along with dedicated cab models
✪ USB jack for firmware upgrading, loading/managing effects with free PC/Mac software
✪ FX Loop jacks for expanded effects
✪ 10 Presets (2 banks x 5 presets)
✪ Built-in OLED screen with clear display
✪ 5 transparent knobs with LEDs
✪ 9V DC power supply
Features
DESIGN INSPIRAT I O N
1-2.▽/△:For selecting presets, bypass, and other parameters.
3. +/- buttons: For selecting effects and adjusting parameters.
4. CAB SIM button: For switching cab sim on/off.
5. SAVE button: For saving parameter changes.
6. OLED screen: Shows bank/patch numbers, setting values and other operation info.
7. VOL: Controls effect output level.
8-10. BASS/MIDDLE/TREBLE: 3-Band EQ, controls the effect tone.
11. GAIN: Controls effect gain amount.
12. INPUT: 1/4” (6.35mm) mono jack, for plugging in instruments or other effects.
13-14. SEND/RETURN jacks: 1/4” (6.35mm) mono jacks, for connecting other effects.
15. OUTPUT: 1/4” (6.35mm) mono jack, for connecting to amps or other effects.
16. USB jack: Mini USB jack, for effects editing, firmware updates, and factory reset.
17. DC 9V: Plug in your power supply here (DC 9V, center negative).
Panel Introduction
DESIGN INSPIRAT I O N
Note:
1. If Binary Amp sounds harsh or weird when connecting to the input jack on your amp, try to connect to the amp’s FX Loop return jack.
2. TURN ON FIRST, TURN OFF LAST. Always mute the mixer/audio interface or turn down the volume knob on your amp before plugging or unplugging
power jacks, cables, etc. When you're using a mixer or an audio interface, please adjust the knobs onboard carefully to avoid signal clipping.
Connections
DESIGN INSPIRAT I O N
Display
Plugging in your power supply will turn on the device. The main display will come up as below:
1 - Current bank/patch number
2 - Shows only when the cab sim is on
3 - Indicates the amp model you’re using in current patch
DESIGN INSPIRAT I O N
Select a Patch/Bank
Tap either ▽/△ footswitch once to change patches. Tap △ footswitch repeatedly to cycle through patches in the order A1, A2,
A3, …, B5, then A1. Tap ▽ footswitch to change patches in the opposite order.
DESIGN INSPIRAT I O N
Bypass
Tap both ▽/△ footswitches at the same time. In Bypass status, all the LED knobs will go out.
Note: This unit will be set to bypass status when you plug in the power jack.
DESIGN INSPIRAT I O N
Edit
1. Adjust the parameters
Use the onboard knobs to adjust the effect parameters. The screen display will be shown as below when adjusting:
1 - Current parameter value you’re adjusting (shown: volume)
2 - Saved parameter value in the current patch (PREV. = Previous value)
DESIGN INSPIRAT I O N
Edit
2. Select a different effect
Use the +/- button to change to another amp:
The inverted bank/patch number indicates that the current patch has been edited.
Inhaltsverzeichnis
Andere Hotone Musikpedal Handbücher
Hotone
Hotone Omni IR Bedienungsanleitung
Hotone
Hotone Ampero Bedienungsanleitung
Hotone
Hotone JOGG Montageanleitung
Hotone
Hotone BINARY Bedienungsanleitung
Hotone
Hotone A STATION Bedienungsanleitung
Hotone
Hotone Soul Press II Bedienungsanleitung
Hotone
Hotone Ampero Bedienungsanleitung
Hotone
Hotone AMPERO II STAGE Bedienungsanleitung
Hotone
Hotone Ampero Bedienungsanleitung
Hotone
Hotone Binary Mod Bedienungsanleitung
Beliebte Musikpedal Handbücher anderer Marken
Matthews Effects
Matthews Effects Whaler V2 Bedienungsanleitung
Grid 1
Grid 1 Pedal Jeanie Bedienungsanleitung
Amptweaker
Amptweaker tightboost Bedienungsanleitung
Ibanez
Ibanez TS-808 Tube Screamer Overdrive Pro Bedienungsanleitung
PuzzleSounds
PuzzleSounds DR. Q ENVELOPE FILTER Bedienungsanleitung
BYOC
BYOC Analog Chorus Handbuch
