Hotone Binary Mod Bedienungsanleitung
DESIGN INSPIRATION
Binary Mod Owner's Manual
DESIG N IN SP IRATION
Congratulations on your new Hotone Binary pedal! You have just added some serious power to your pedalboard.
The Binary series lets loose versatile pro effects in compact cases. A dual-DSP powered platform and CDCM modeling system
ensure a realistic playing experience, dual-footswitch design and variable I/Os make it easy to use, and an OLED screen offers
clear, detailed display.
Binary Mod is a CDCM-based multi modulation effects pedal with stereo I/O and expression pedal support, delivering precise
classic modulation pedal sounds along with new and inspiring Hotone original modulation effects.
Welcome
DESIG N IN SP IRATION
✪ Grown out of next-gen XTOMP technology
✪ Compact, easy-to-use dual footswitch modulation pedal with tap tempo
✪ Advanced CDCM modeling system ensures realistic playing experience
✪ Dual DSP-powered platform ensures high sound quality
✪ 24-bit A/D/A conversion, up to 110dB S/N ratio
✪ 24 high quality modulation effects including CDCM-based classics and Hotone originals
✪ Tap Tempo function with Tap Divide
✪ Stereo I/Os
✪ EXP jack for expression pedal control
✪ USB jack for firmware upgrading, loading/managing effects with free PC/Mac software
✪ 10 Presets (2 banks x 5 patches)
✪ Built-in OLED screen with clear display
✪ 5 transparent knobs with LEDs
✪ 9V DC power supply
Features
DESIG N IN SP IRATION
1. ON/OFF: For switching the unit on/off. The LEDs under the upper 5 knobs indicate
effect on/off status.
2. PATCH/TAP: Tap for selecting forward patches in current bank, hold for
engaging/disengaging tap tempo mode.
3. +/- buttons: For selecting effects and adjusting parameters.
4. GLOBAL: For setting expression pedal, input mode, and other parameters.
5. SAVE/EXIT button: For saving or canceling parameter changes.
6. OLED screen: Shows bank/patch numbers, setting values and other operation info.
7. E.LEVEL: Controls effect output level (varies with effects).
8-9. A/B: Control detailed effect character (varies with effects).
10. DEPTH: Controls effect depth (varies with effects).
11. RATE: Controls the effect speed (varies with effects). In Tap Tempo mode, use RATE knob
to set a Tap Tempo subdivision*, and the RATE LED will keep flashing.
12. INPUT: 1/4” (6.35mm) stereo jack, for plugging in instruments or other effects.
A Y cable is needed when connecting to stereo pedal outputs.
13. EXP: 1/4” (6.35mm) TRS jack, for connecting an expression pedal.
The expression pedal should have a TRS cable attached to it.
We recommend using a Hotone Soul Press (switched to EXP mode) for expression control.
14-15. OUTPUT (L & R): 1/4” (6.35mm) mono jacks, for connecting to amps or other effects.
16. USB jack: Mini USB jack, for effects editing, firmware updates, and factory reset.
17. DC 9V: Plug in your power supply here (DC 9V, center negative).
Panel Introduction
*Requires firmware v1.1.2 or later
DESIG N IN SP IRATION
Note: TURN ON FIRST, TURN OFF LAST. Always turn down the volume knob on your amp before plugging or unplugging power jacks, cables, etc.
Connections
DESIG N IN SP IRATION
Display
Plugging in your power supply will turn on the device. The main display will come up as shown below:
1 - Current bank/patch number
2 - Shows the expression pedal controlled parameter
3 - Indicates the effect model you’re using in current patch
DESIG N IN SP IRATION
Select a Patch/Bank
Tap the PATCH footswitch once to switch to the next patch. Tap it repeatedly to cycle through patches of the current bank in the
order 1, 2, 3, 4, 5, then 1.
Tap the two footswitches at the same time to switch to the next bank. Tap them repeatedly to cycle through banks in the order A,
B, then A.
DESIG N IN SP IRATION
Tap Tempo
Hold the PATCH/TAP footswitch to engage Tap Tempo mode when the effect is on. Then tap the PATCH/TAP footswitch to set a tempo speed.
In this mode, the LED under the RATE knob will pulse to indicate the effect rate you set. Hold the PATCH/TAP footswitch again to disengage.
In Tap Tempo mode, turn the RATE knob (or any related knobs) to set a proper tap tempo subdivision shown as below:
SUBDIVISION
Whole Note
Half Note
Dotted Half Note
Half Note Triplet
Quarter Note (no division)
Dotted Quarter Note
Quarter Note Triplet
8th Note
Dotted 8th Note
8th Note Triplet
16th Note
DIVIDE RATIO
4
2
3
4/3
1/1
3/2
2/3
1/2
3/4
1/3
1/4
DISPLAY
1
1/2
1/2D
1/2T
1/4
1/4D
1/4T
1/8
1/8D
1/8T
1/16
Note: 1. The default division is Quarter Note (1/4, no division). Disengaging Tap Tempo function will reset the subdivision to default.
2. Tap Tempo subdivision function requires firmware v1.1.2 or later.
DESIG N IN SP IRATION
Global
Press the GLOBAL button repeatedly to cycle through input mode, expression pedal settings and firmware version info:
Use the +/- buttons to set the parameters, press the SAVE/EXIT button (or wait for 5 seconds without any operation) to confirm settings and exit to the
main display.
Note: 1. There is no parameter in firmware info display.
2. To check firmware version on your Binary Mod, you need to update to firmware v1.1.1 or later.
DESIG N IN SP IRATION
Edit
1. Adjust the parameters
Use the onboard knobs to adjust the effect parameters. The screen display will be shown as below when adjusting:
1 - Current parameter value you’re adjusting (shown: rate)
2 - Saved parameter value in the current patch (PREV. = Previous value)
2. Select a different effect
Use the +/- button to change to another effect:
The inverted bank/patch number indicates that the current patch has been edited.
Inhaltsverzeichnis
Andere Hotone Musikpedal Handbücher
Hotone
Hotone JOGG Montageanleitung
Hotone
Hotone Soul Press II Bedienungsanleitung
Hotone
Hotone Ampero Bedienungsanleitung
Hotone
Hotone A STATION Bedienungsanleitung
Hotone
Hotone AMPERO II STAGE Bedienungsanleitung
Hotone
Hotone Ampero Bedienungsanleitung
Hotone
Hotone Skyline Wally Bedienungsanleitung
Hotone
Hotone Binary Amp Bedienungsanleitung
Hotone
Hotone Binary IR Bedienungsanleitung
Hotone
Hotone TAPE EKO Bedienungsanleitung
Beliebte Musikpedal Handbücher anderer Marken
Matthews Effects
Matthews Effects Whaler V2 Bedienungsanleitung
Grid 1
Grid 1 Pedal Jeanie Bedienungsanleitung
Amptweaker
Amptweaker tightboost Bedienungsanleitung
Ibanez
Ibanez TS-808 Tube Screamer Overdrive Pro Bedienungsanleitung
PuzzleSounds
PuzzleSounds DR. Q ENVELOPE FILTER Bedienungsanleitung
BYOC
BYOC Analog Chorus Handbuch
