HP 9100C Digital Sender Bedienungsanleitung

1. Load the documents into feeder{face up} / or on glass {face down}

2. Press E-Mail

3. Type your email address in the FROM Field.

4. Press Enter.

5. Type a subject into SUBJECT Line.

6. Press Enter

7. Type a valid email address in the TO field.

8. Press Enter. {you can repeat this process for multiple email addresses}

9. Press Start

Enter

Start

-Loading a document

You can load a stack of pages in the ADF

or load one page at a time on the glass.

See “What documents you can place in

the digital sender”on page 30 if you

need help determining which method to

use.

CAUTION

Before using the ADF, remove from the

document anything such as self-

adhesive notes, paper clips, or staples,

that could get caught in the digital

sender and damage it.

To load a document in the ADF

1Raise the ADF unit and ensure

nothing is on the glass. Then, close

ADF unit.

2Slide the document (up to 50 pages)

face up, top first, into the ADF until

the document stops. Center the

document between the document

guides.

3Adjust the document guides to fit

snugly against the sides of the stack.

4If necessary, adjust the output

support to the correct paper size.

5Set the digital sender to accept your

single- or double-sided document by

pressing the SINGLE-/DOUBLE-SIDED

key until the light under the correct

icon is lit.

6---.

To load a document on the

glass

1Raise the ADF unit to reveal the

glass.

2Place the page face down on the

glass, top edge toward the back.

3Align the document in the upper-

right corner of the glass.

4Lower the ADF unit.

5-.

To clear jams at the end of a

page

1Raise the control panel and then the

document tray.

2Remove the jammed paper.

3Close the document tray and push

the control panel down securely.

4The control panel prompts you to do

one of the following:



Reinsert the paper and press

to continue sending.



Stop processing and send the

data to its destination by pressing

SEND.



Stop sending without saving your

data by pressing .

Clearing paper jams

When you have a paper jam, the control

panel displays this message: Paper

jam. Open the cover and remove the

paper. Use the appropriate procedure

below to clear the jam.

To clear jams at the start of a

page

1Raise the control panel.

2Remove the jammed paper.

3Push the control panel down

securely.

4The control panel prompts you to do

one of the following:



Reinsert the paper and press

to continue sending.



Stop processing and send the

data to its destination by pressing

SEND.



Stop sending without saving your

data by pressing .

To clear jams inside the ADF

1Raise the control panel.

2Raise the ADF unit.

3Open the delivery guide by grasping

the small plastic handles on either

side of the delivery guide and pulling

down.

4Remove the jammed paper.

5Close the delivery guide sheet by

aligning its holes with the small

plastic spindles on the delivery guide

and pressing down.

6Close the ADF unit.

7Push the control panel down

securely.

8The control panel prompts you to do

one of the following:



Reinsert the paper and press

to continue sending.



Stop processing and send the

data to its destination by pressing

SEND.



Stop sending without saving your

data by pressing .

Inhaltsverzeichnis

Andere HP Barcode-Lesegerät Handbücher

HP Engage One 2D Bedienungsanleitung

HP EY022AA Gebrauchsanweisung

HP BW868AA Bedienungsanleitung

HP Wireless Barcode Scanner Bedienungsanleitung

HP 9200C - Digital Sender Bedienungsanleitung

HP 4430 Bedienungsanleitung

HP EY022AT Bedienungsanleitung

HP LaserJetsseries Bedienungsanleitung

HP Linear Barcode Scanner II Bedienungsanleitung

HP Wireless Barcode Scanner Bedienungsanleitung

HP 82153A Bedienungsanleitung

HP Linear Barcode Scanner II Bedienungsanleitung

HP BW868AA Gebrauchsanweisung

Beliebte Barcode-Lesegerät Handbücher anderer Marken

POSMicro

POSMicro Datalogic PowerScan D7100 Bedienungsanleitung

NCR

NCR RealPOS Bedienungsanleitung

Motorola

Motorola SE3300 Kurzanleitung zur Einrichtung

Motorola

Motorola Symbol LS3008 Installations- und Betriebshandbuch

Meec tools

Meec tools OBD-II / VAG Bedienungsanleitung

SICK

SICK CLP 100 Bedienungsanleitung

Royal Tag SA

Royal Tag SA I-Read Bedienungsanleitung

Welch Allyn

Welch Allyn IMAGETEAM 3800 Bedienungsanleitung

Meteor

Meteor 8310 Bedienungsanleitung

Denso

Denso BHT-500B Bedienungsanleitung

Datalogic

Datalogic Heron HD3130 Bedienungsanleitung

Motorola

Motorola MP6000 Montageanleitung

Newland

Newland NLS-HR15-BT Bedienungsanleitung

ARTDEV

ARTDEV AS-1310 Bedienungsanleitung

Aopos

Aopos AS290 Bedienungsanleitung

ENS

ENS 367-5455 Bedienungsanleitung

Atid

Atid AT188N Plus Bedienungsanleitung

AZENTA

AZENTA 281947 Bedienungsanleitung