HP Engage One 2D Bedienungsanleitung

User Guide

L.P.

The information contained herein is subject to

change without notice. The only warranties for

HP products and services are set forth in the

express warranty statements accompanying

such products and services. Nothing herein

should be construed as constituting an

additional warranty. HP shall not be liable for

technical or editorial errors or omissions

contained herein.

Second Edition: July 2018

First Edition: June 2017

Document Part Number: 937403-002

About This Guide

This guide provides information on setting up and using the scanner.

WARNING! Indicates a hazardous situation that, if not avoided, could result in death or serious injury.

CAUTION: Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.

IMPORTANT: Indicates information considered important but not hazard-related (for example, messages

related to property damage). An Important alert warns the user that failure to follow a procedure exactly as

described could result in loss of data or in damage to hardware or software. Also contains essential

information to explain a concept or to complete a task.

NOTE: Contains additional information to emphasize or supplement important points of the main text.

TIP: Provides helpful hints for completing a task.

iii

iv About This Guide

Table of contents

1 Using the scanner .......................................................................................................................................... 1

Connecting the scanner ......................................................................................................................................... 1

Reading techniques ............................................................................................................................................... 1

Scanning in hands-free mode ................................................................................................................................ 2

Standard product defaults ..................................................................................................................................... 2

Keyboard country ................................................................................................................................................... 2

Trigger .................................................................................................................................................................... 3

Suix ...................................................................................................................................................................... 3

Add code ID Prex to all symbologies ................................................................................................................... 4

Function code transmit .......................................................................................................................................... 4

Data format editor instructions ............................................................................................................................. 4

Programming chart ................................................................................................................................................ 5

2 Technical support .......................................................................................................................................... 7

Contacting support ................................................................................................................................................ 7

Preparing to call technical support ....................................................................................................................... 7

1 Using the scanner

Connecting the scanner

1. Turn o power to the computer.

2. Connect the scanner’s USB cable to a USB Type-A port on the I/O connectivity base.

3. Turn on power to the computer.

Reading techniques

The view nder projects an aiming beam that should be centered over the bar code, but it can be positioned in

any direction for a good read. Hold the scanner over the bar code, press the button, and center the aiming

beam on the bar code.

The aiming beam is smaller when the scanner is closer to the code and larger when it is farther from the code.

Hold the scanner close to smaller bar codes, and farther away from large bar codes to get a proper read.

If the bar code is highly reective (laminated, for example), you may need to tilt the scanner at an angle so

the bar code can be scanned.

Connecting the scanner 1

Scanning in hands-free mode

When the scanner is seated in the stand the scanner’s built-in sensor places the scanner in hands-free mode.

When the scanner is removed from the stand it operates in its normal hand-held mode.

1. Make sure that all cable connections are secure.

2. Insert the scanner in the stand by placing the scanner onto the stand.

3. To scan a bar code, place the bar code up to the scanner and make sure that the scan line crosses every

bar and space of the symbol.

4. Upon successful decode, the scanner beeps and the LED turns green.

Standard product defaults

The following bar code resets all standard product default settings.

Standard Product Defaults

Keyboard country

Scan the Program Keyboard Country bar code below, then scan the numeric bar code(s) from the

Programming chart on page 5, and then scan the Save bar code to program the keyboard for your country.

As a general rule, the following characters are not supported by the scanner for countries other than the

United States:

@ | $ # { } [ ] = / ‘ \ < > ~.

Program Keyboard Country

Country Code Scan Country Code Scan

Belgium 1 Italy 5

Brazil 16 Japan 28

Czechoslovakia 15 Latin America 14

Denmark 8 Russia 26

Finland 2 Slovakia 22

France 3 Spain 10

Germany/Austria 4 Switzerland 6

Great Britain 7 USA (Default) 0

Norway 9

2 Chapter 1 Using the scanner

Save

NOTE: For a complete list of country codes, see the HP Engage One 2D Barcode Scanner Programming Guide

at http://www.hp.com/support.

Trigger

The following bar codes will allow you to use the scanner in Manual Trigger - Normal Mode (press the button

to read) or Presentation Mode (the scanner is activated when it “sees” a bar code).

Manual Trigger - Normal (Default)

Presentation Mode

Suix

If you want a carriage return after the bar code, scan the Add CR Suix bar code. To add a tab after the bar

code, scan the Add Tab Suix bar code. Otherwise, scan the Remove Suix bar code to remove the suixes.

Add CR Suix

Add Tab Suix

Remove Suix

Trigger 3

Add code ID Prex to all symbologies

Scan the following bar code if you want to add a Code ID prex to all symbologies at once.

Add Code ID Prex To All Symbologies (Temporary)

NOTE: For a complete list of Code IDs, see the HP Engage One 2D Barcode Scanner Programming Guide at

http://www.hp.com/support.

Function code transmit

When this selection is enabled and function codes are contained within the scanned data, the scanner

transmits the function code to the terminal. Charts of these function codes are provided in the HP Engage One

2D Barcode Scanner Programming Guide at http://www.hp.com/support. When the scanner is in keyboard

wedge mode, the scan code is converted to a key code before it is transmitted.

Enable (Default)

Disable

Data format editor instructions

The following are abbreviated instructions for entering a data format. For complete instructions, see the HP

Engage One 2D Barcode Scanner Programming Guide at http://www.hp.com/support.

Follow the instructions below.

1. Scan the Enter Data Format symbol.

2. Primary/Alternate Format: scan 0 for Primary Format.

3. Terminal Type: scan 099 for any terminal type.

4. Code I.D.: scan 99 for any bar code type.

5. Length: scan 9999 for any length bar code.

6. Editor commands: use the programming chart that follows.

7. Scan Save to save your entries.

Enter Data Format

4 Chapter 1 Using the scanner

Inhaltsverzeichnis

Andere HP Barcode-Lesegerät Handbücher

HP EY022AT Bedienungsanleitung

HP 4430 Bedienungsanleitung

HP 82153A Bedienungsanleitung

HP LaserJetsseries Bedienungsanleitung

HP Wireless Barcode Scanner Bedienungsanleitung

HP Linear Barcode Scanner II Bedienungsanleitung

HP BW868AA Bedienungsanleitung

HP Wireless Barcode Scanner Bedienungsanleitung

HP 9100C Digital Sender Bedienungsanleitung

HP EY022AA Gebrauchsanweisung

HP BW868AA Gebrauchsanweisung

HP 9200C - Digital Sender Bedienungsanleitung

Beliebte Barcode-Lesegerät Handbücher anderer Marken

POSMicro

POSMicro Datalogic PowerScan D7100 Bedienungsanleitung

NCR

NCR RealPOS Bedienungsanleitung

Motorola

Motorola SE3300 Kurzanleitung zur Einrichtung

Motorola

Motorola Symbol LS3008 Installations- und Betriebshandbuch

Meec tools

Meec tools OBD-II / VAG Bedienungsanleitung

SICK

SICK CLP 100 Bedienungsanleitung

Royal Tag SA

Royal Tag SA I-Read Bedienungsanleitung

Welch Allyn

Welch Allyn IMAGETEAM 3800 Bedienungsanleitung

Meteor

Meteor 8310 Bedienungsanleitung

Denso

Denso BHT-500B Bedienungsanleitung

Datalogic

Datalogic Heron HD3130 Bedienungsanleitung

Motorola

Motorola MP6000 Montageanleitung

Newland

Newland NLS-HR15-BT Bedienungsanleitung

ARTDEV

ARTDEV AS-1310 Bedienungsanleitung

Aopos

Aopos AS290 Bedienungsanleitung

ENS

ENS 367-5455 Bedienungsanleitung

Atid

Atid AT188N Plus Bedienungsanleitung

AZENTA

AZENTA 281947 Bedienungsanleitung