HP FlexFabric 12908E LSXM108XFAN Bedienungsanleitung

Andere HP Computerhardware Handbücher

HP

HP E5000 Bedienungsanleitung

HP

HP Xw4600 - Workstation - 2 GB RAM Bedienungsanleitung

HP

HP 3000 Series Handbuch

HP

HP D7171A - NetServer - LPr Installations- und Betriebshandbuch

HP

HP Xw4600 - Workstation - 2 GB RAM Merkblatt

HP

HP 6-Port SATA RAID Bedienungsanleitung

HP

HP HPE LSWM2XGT2PM Bedienungsanleitung

HP

HP A5830AF-48G Bedienungsanleitung

HP

HP USB 3.0 4-Port SuperSpeed PCIe x1 Card Bedienungsanleitung

HP

HP Xw8400 - Workstation - 4 GB RAM Bedienungsanleitung

HP

HP Z Turbo Drive Quad Pro Bedienungsanleitung

HP

HP Pavilion xl700 - Desktop PC Bedienungsanleitung

HP

HP Integrity rx1600 Bedienungsanleitung

HP

HP 10512 Montageanleitung

HP

HP RDX USB 3.0 Bedienungsanleitung

HP

HP A3550A - High Availability Disk Arrays Model 20 Storage... Bedienungsanleitung

HP

HP OmniBook 3100 Bedienungsanleitung

HP

HP Z400 - Workstation Bedienungsanleitung

HP

HP 64782 Bedienungsanleitung

HP

HP HPE SimpliVity 325 Bedienungsanleitung

HP

HP UNDP-1H Bedienungsanleitung

HP

HP MCS-200 Bedienungsanleitung

HP

HP Kayak XW U3-W3 Bedienungsanleitung

HP

HP Nc6400 - Compaq Business Notebook Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung

HP FlexFabric 12908E LSXM108XFAN Fan Tray User Manual-APW100 BOM:3101A0JX Part Number:5998-7601

2

1

Overview

The LSXM108XFAN fan tray (JH258A) applies to the 12908E switch. The 12908E switch

requires two fan trays and has two fan tray slots: FAN1 and FAN2. The LSXM108XFAN fan

tray contains three fans. When the fan tray is operating, ambient air flows in through the air

vents in the MPU and LPU/interface module adapter panels, circulates through the switching

fabric module section, and exhausts through the air vents in the fan tray.

Captive

screw

Handle

Switching fabric module

status LED

Fan

Panel side view Fan side view

Fan tray status LED

The fan tray is hot swappable. Follow these guidelines when you replace the fan tray on an

operating 12908E switch:

•Ensure electrical safety.

• Replace a fan tray only when the other fan tray is operating correctly.

• To avoid power-off protection of the switch caused by high temperature, finish installing a new fan

tray within three minutes after you remove the fan tray.

• When you hot-swap the fan tray, only one fan tray is operating and it makes large noise. Take

protection measures such as wearing an earmuff or earplug. In addition, make good preparation

before the operation to minimize the operation time.

Do not power on a switch that does not have any fan trays installed.

Before you install or replace a switching fabric module on an operating 12908E switch,

first remove the fan tray. Install the fan tray immediately after you finishing installing or

replacing the switching fabric module. Prepare in advance to make sure the whole

process is finished within 3 minutes.

For good ventilation, install filler panels in empty switching fabric module slots.

!

Tools required

Phillips screwdriver

ESD-preventive

wrist strap

To avoid device damage and bodily injury, use two people to install or remove the fan tray.

For good dissipation, you must install fan trays in both FAN1 and FAN2 slots. When a

fan tray fails, do not remove it until the new fan tray is ready. The device can operate

correctly if the failed fan tray is still in position.

!

Installing a fan tray

Before you install a fan tray, install switching fabric moduels or filler panels in the

switching fabric module slots.

The procedures are similar for installing a fan tray in FAN1 slot and FAN2 slot. To

install a fan tray in FAN1 slot, align the top and left edges of the fan tray in the slot.

To install a fan tray in FAN2 slot, align the top and right edges of the fan tray in the

slot.

!

Holding the upper fan tray handle with one hand and the lower fan tray handle with the

other hand, insert the fan tray into the slot. Keep the fan tray as straight as possible.

Fasten the captive screws on the fan tray.

3

4

5

Orient the fan tray with the upside up and align the fan tray with the fan tray slot.

Wear an ESD wrist strap and make sure it makes good skin contact and is reliably

grounded.

Unpack the fan tray.

1

2

1

2

Removing a fan tray

When you remove a fan tray, do not touch the rotating fans to avoid getting injured.

Before you replace a switching fabric module, remove the fan tray.

!

Loosen the captive screws on the fan tray.

Holding the upper fan tray handle with one hand and the lower fan tray handle with

the other hand, pull the fan tray outwards slowly until the fan tray is disengaged from

the chassis. Remove the fan tray after the fans stop rotating.

Place the fan tray on the anti-static mat.

3

4

5

Wear an ESD wrist strap and make sure it makes good skin contact and is reliably

grounded.

2

Prepare an anti-static mat.

1

1 2

To find related documents, browse to the Manuals page of the HP Business

Support Center website:

http://www.hp.com/support/manuals

Documentation

5998-7601