HP Synergy 480 Gen10 Bedienungsanleitung

HPE Synergy 480 Gen10 Compute Module User GuideHPE Synergy 480 Gen10 Compute Module User Guide

Part Number: 30-AAD7A7A0-008

Published: June 2021

Edition: 8

HPE Synergy 480 Gen10 Compute Module User GuideHPE Synergy 480 Gen10 Compute Module User Guide

AbstractAbstract

This document is for the person who installs, administers, and troubleshoots the HPE Synergy system. Hewlett Packard Enterprise assumes

you are qualified in the servicing of computer equipment and trained in recognizing hazards in products with hazardous energy levels.

Part Number: 30-AAD7A7A0-008

Published: June 2021

Edition: 8

NoticesNotices

The information contained herein is subject to change without notice. The only warranties for Hewlett Packard Enterprise products and

services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as

constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions contained

herein.

Confidential computer software. Valid license from Hewlett Packard Enterprise required for possession, use, or copying. Consistent with FAR

12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed

to the U.S. Government under vendor's standard commercial license.

Links to third-party websites take you outside the Hewlett Packard Enterprise website. Hewlett Packard Enterprise has no control over and is

not responsible for information outside the Hewlett Packard Enterprise website.

AcknowledgmentsAcknowledgments

Intel , Itanium , Optane , Pentium , Xeon , Intel Inside , and the Intel Inside logo are trademarks of Intel Corporation in the U.S. and other

countries.

AMD and the AMD EPYC and combinations thereof are trademarks of Advanced Micro Devices, Inc.

Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

Adobe and Acrobat are trademarks of Adobe Systems Incorporated.

Java and Oracle are registered trademarks of Oracle and/or its affiliates.

UNIX is a registered trademark of The Open Group.

All third-party marks are property of their respective owners.

® ® ™ ® ® ®

™

® ®

Table of contentsTable of contents
Component identification
1 Front panel components
1.1 Serial label pull tab information
2 Front panel LEDs and buttons
3 Drive numbering
4 Smart Carrier (SC) drive LED definitions
5 SFF flash adapter components and LED definitions
6 Smart Carrier NVMe (SCN) drive LED definitions
7 System board components
7.1 System maintenance switch
7.2 Processor, heatsink, and socket components
7.3 Mezzanine connector definitions
7.4 DIMM slot locations
7.5 DIMM label identification
7.6 NVDIMM identification
7.6.1 NVDIMM 2D Data Matrix barcode
7.7 NVDIMM LED identification
7.7.1 NVDIMM-N LED combinations
7.7.2 NVDIMM Function LED patterns
7.8 Intel Optane persistent memory 100 series for HPE label identification
7.9 Enterprise Midline USB
7.10 LEDs
8 Component and LED identification for HPE Synergy hardware
Operations
1 Powering up the compute module
2 Powering down the compute module
3 Removing the drive blank
4 Removing the compute module
5 Removing the compute module end cap
6 Removing the access panel
7 Removing the DIMM baffle
8 Removing the front panel/drive cage assembly
9 Installing the compute module end cap
10 Installing the access panel
11 Installing the DIMM baffles
12 Installing the front panel/drive cage assembly
Setup
1 Installation overview
2 Installing the compute module
3 Completing the configuration
Hardware options installation
1 Introduction

2 Installing SAS, SATA, or solid state drives
3 Installing the SFF flash adapter option
4 Installing the M.2 SSD flash drive and adapter board
5 Installing the controller option
6 Installing mezzanine card options
7 Installing the P416ie-m Controller mezzanine option
8 HPE Smart Storage Battery
9 HPE Smart Storage Hybrid Capacitor
9.1 Minimum firmware versions
9.2 Installing the energy pack option
10 Memory options
10.1 DIMM and NVDIMM population information
10.2 DIMM-processor compatibility
10.3 HPE SmartMemory speed information
10.4 Installing a DIMM
10.5 HPE 16GB NVDIMM option
10.5.1 Server requirements for NVDIMM support
10.5.2 Installing an NVDIMM
10.5.3 Configuring the compute module for NVDIMMs
10.5.4 NVDIMM sanitization
10.5.5 NVDIMM relocation guidelines
10.6 Intel Optane persistent memory 100 series for HPE
10.6.1 Persistent memory module-processor compatibility
10.6.2 Persistent memory module population information
10.6.3 System requirements for persistent memory module support
10.6.4 Installing persistent memory modules
10.6.5 Configuring the compute module for Intel Optane persistent memory 100 series for HPE
10.6.6 Persistent memory module relocation guidelines
10.6.7 Migrating a persistent memory module
11 Installing the processor heatsink option
12 HPE Trusted Platform Module 2.0 Gen10 option
12.1 Overview
12.2 HPE Trusted Platform Module 2.0 guidelines
12.3 Installing and enabling the HPE TPM 2.0 Gen10 option
12.3.1 Installing the Trusted Platform Module board
12.3.1.1 Preparing the compute module for installation
12.3.1.2 Installing the TPM board and cover
12.3.1.3 Preparing the compute module for operation
12.3.2 Enabling the Trusted Platform Module
12.3.2.1 Enabling the Trusted Platform Module as TPM 2.0
12.3.2.2 Enabling the Trusted Platform Module as TPM 1.2
12.3.3 Retaining the BitLocker recovery key/password
Cabling
1 Cabling resources

2 Energy pack option cabling
3 P416ie-m Smart Array Controller cabling
Removing and replacing the system battery
Electrostatic discharge
1 Preventing electrostatic discharge
2 Grounding methods to prevent electrostatic discharge
Specifications
1 Compute module environmental specifications
2 Compute module physical specifications
HPE Synergy documentation resources
1 HPE Synergy firmware update resources
HPE Synergy documentation map
Websites
Support and other resources
1 Accessing Hewlett Packard Enterprise Support
2 Accessing updates
3 Remote support
4 Warranty information
5 Regulatory information
6 Documentation feedback

Component identificationComponent identification

Component identification 6

Front panel componentsFront panel components

ItemItem DescriptionDescription

1 Drive bay 1

2 Drive bay 2

3 External USB iLO Service Port (169.254.1.2) - located behind the Serial label pull tab

4 External USB 3.0 connector (located behind the Serial label pull tab)

5 Compute module handle release latch

6 Compute module handle

If uFF drives (the SFF Flash Storage Adapter) are installed in the drive bays, the drive bay numbering is different. For more

information, see

Drive numbering

Front panel components 7

Serial label pull tab informationSerial label pull tab information

The serial label pull tab is on the front panel of the compute module. To locate the serial label pull tab, see Front panel components. The

serial label pull tab provides the following information:

Product serial number

HPE iLO information

Serial label pull tab information 8

Front panel LEDs and buttonsFront panel LEDs and buttons

ItemItem DescriptionDescription StatusStatus

1 UID LED Solid blue = Activated

Flashing blue (1 Hz/cycle per sec) = Remote management or

firmware upgrade in progress

Off = Deactivated

2 Health status LED Solid green = Normal

Flashing green (1 Hz/cycle per sec) = iLO is rebooting.

Flashing amber = System degraded

Flashing red (1 Hz/cycle per sec) = System critical

3 Mezzanine NIC status LED Solid green= Link on any Mezzanine NIC

Flashing green= Activity on any Mezzanine NIC

Off = No link or activity on any Mezzanine NIC

4 Power On/Standby button and system power

LED

Solid green = System on

Flashing green (1 Hz/cycle per sec) = Performing power on

sequence

Solid amber = System in standby

Off = No power present

NOTE:NOTE:

If all other LEDs are off, no compute module power is

present (facility power is not present, power cord is

not attached, power supplies are not installed, power

supply failure has occurred, or the power button

cable is disconnected). If the health LED is flashing

green while the system power LED is off, the PowerPower

On/StandbyOn/Standby button service is initializing or an iLO

reboot is in progress.

Front panel LEDs and buttons 9

Front panel LEDs and buttons 10

Inhaltsverzeichnis

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung