HP Compaq Presario,Presario 4400 Leitfaden

Andere Handbücher für Compaq Presario,Presario 4400

9

Dieses Handbuch passt für folgende Modelle

1

Inhaltsverzeichnis

Andere HP Controller Handbücher

HP

HP VXI 75000 C Series Betriebsanleitung

HP

HP 273914-B21 - Smart Array 6404/256 RAID... Bedienungsanleitung

HP

HP 166207-B21 - Smart Array 5302/32 RAID... Bedienungsanleitung

HP

HP 8169A Bedienungsanleitung

HP

HP StorageWorks Modular Smart Array 500 System Installationsanleitung

HP

HP ProLiant DL160se - G6 Server Bedienungsanleitung

HP

HP 615418-B21 Bedienungsanleitung

HP

HP 3X-DEGXA-XX PCI-X Bedienungsanleitung

HP

HP StorageWorks P2000 Leitfaden

HP

HP Smart Array P430 Gebrauchsanweisung

HP

HP ProCurve MSM750 Bedienungsanleitung

HP

HP MSM720 Bedienungsanleitung

HP

HP StorageWorks 2312 Bedienungsanleitung

HP

HP ProCurve MSM760 Bedienungsanleitung

HP

HP A9891A Bedienungsanleitung

HP

HP ProCurve MSM710 Bedienungsanleitung

HP

HP 30242 Handbuch

HP

HP MSM775 zl Bedienungsanleitung

HP

HP MSA 2040 Bedienungsanleitung

HP

HP Smart Array E500 Controller Gebrauchsanweisung

HP

HP P Class 450/500/550/600/650/700/750 Bedienungsanleitung

HP

HP 9000 Series 300 Anleitung zur Verwendung

HP

HP Smart Array P711m Gebrauchsanweisung

HP

HP ProCurve MSM710 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch

HP Controller Enclosure

Management Module

Replacement Instructions

© Copyright 2009 Hewlett-Packard Development Company, L.P.

Second edition: May 2011

The information in this document is subject to change without notice.

Printed in Puerto Rico

www.hp.com

*593094-001*

About this document

For the latest documentation, go to http://www.hp.com/support/

manuals, and select your product.

The information contained herein is subject to change without notice.

The only warranties for HP products and services are set forth in the

express warranty statements accompanying such products and services.

Nothing herein should be construed as constituting an additional

warranty. HP shall not be liable for technical or editorial errors or

omissions contained herein.

WARRANTY STATEMENT:

To obtain a copy of the warranty for this product, see the warranty

information website:

http://www.hp.com/go/storagewarranty

Before you begin

•Port-colored (purple) latches on components like the management

module means the component is hot-swappable. The management

module can be removed and replaced without having to power the

system down.

•The management module is located on the rear of the chassis, above

the controllers. See Figure 1.

•Your controller enclosure model may vary slightly from what is illus-

trated in this document.

1. Management module

Figure 1 Management module location

.

Verifying component failure

Use the following methods to verify component failure:

•Check the management module status using HP P6000 Command

View:

1. In the navigation pane, select Storage System > Hardware >

Controller Enclosure > Management Module.

2. In the Management Module Properties window, check the status.

An operational state of (Failed) would indicate a fault that

may require a replacement.

3. To help identify the correct enclosure, select Controller Enclosure

in the navigation pane, and then click Locate > Locate On in the

content pane. This causes the blue UID indicator to blink on the

controller enclosure.

•Check the array management module LEDs:

Page 1

•Green—Normal operation

•Amber—Fault condition (except during start up, when some cyc-

ling of the LED occurs)

•Off—No active remote management

•Ethernet LEDs—Solid green indicates a link. Flashing yellow indic-

ates activity.

Removing a management module

1. Unplug the Ethernet cable from the module.

2. Lift the latch up on the module (1, Figure 2) and pull the module out

slightly.

3. Position one hand under the module, and with the other hand, pull

the module out of the controller enclosure (2, Figure 2).

Figure 2 Removing a management module

.

Installing a management module

1. Insert the management module into the slot in the controller

enclosure.

2. Push the module forward until a click is detected when fully seated.

3. Plug the Ethernet cable into the module.

Verifying proper operation

After replacing the management module, check the following to verify

the component is operating properly:

NOTE:

Wait approximately five minutes for the system to check the

component status.

•Verify the green LED is lit. If not, try reseating the management

module.

•From HP P6000 Command View, navigate to the component as de-

scribed in the Verifying component failure section, and check the

status. It should be (Good).

NOTE:

You cannot store modifications to the management module

settings if the array is not initialized.

Page 2