HP I2000 Montageanleitung

Andere Handbücher für i2000

7

Inhaltsverzeichnis

Andere HP Desktop Handbücher

HP

HP Workstation xw4000 Series Bedienungs- und Wartungshandbuch

HP

HP dx2250 - Microtower PC Bedienungsanleitung

HP

HP Net PC 20 Bedienungsanleitung

HP

HP Vectra VL400 Produkthandbuch

HP

HP Pavilion v400 - Desktop PC Bedienungsanleitung

HP

HP Pavilion a100 - Desktop PC Bedienungsanleitung

HP

HP Rp5000 - Point of Sale System Montage- und Wartungsanleitung

HP

HP ENVY Montageanleitung

HP

HP dx2355 - Microtower PC Einrichtungshandbuch

HP

HP EliteDesk 705 G3 Montageanleitung

HP

HP Media Center m400 - Desktop PC Technisches Datenblatt

HP

HP Compaq dx5150 SFF Bedienungs- und Wartungshandbuch

HP

HP Compaq Presario Bedienungsanleitung

HP

HP Omni 27-1100 Bedienungsanleitung

HP

HP Workstation xw6000 Bedienungsanleitung

HP

HP Z200 - Small Form Factor Workstation Handbuch

HP

HP Pavilion t237k Bedienungsanleitung

HP

HP Pavilion w1000 - Desktop PC Bedienungsanleitung

HP

HP Compaq d220 MT Technisches Datenblatt

HP

HP Pavilion w1000 - Desktop PC Bedienungsanleitung

HP

HP Pavilion w1100 - Desktop PC Bedienungsanleitung

HP

HP EliteDesk 880 G2 Montageanleitung

HP

HP X2 210 G2 Handbuch

HP

HP Visualize c160 Bedienungsanleitung

Beliebte Desktop Handbücher anderer Marken

Asus

Asus E210 Series Bedienungsanleitung

Dell

Dell Inspiron 600m Bedienungsanleitung

Dell

Dell Inspiron 3662 Bedienungsanleitung

TotalFlow

TotalFlow uFLO Bedienungsanleitung

Logitech

Logitech MK320 Bedienungsanleitung

Dell

Dell XPS 730 H2C Bedienungsanleitung

Sony

Sony Vaio Series Bedienungsanleitung

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Bedienungsanleitung

Alto

Alto MD 250 Bedienungsanleitung

Lenovo

Lenovo ThinkCentre Edge 72 Handbuch

Lenovo

Lenovo ThinkStation D20 Handbuch

Arbor Technology

Arbor Technology FPC-7800 Series Bedienungsanleitung

Sony

Sony VAIO VGX-TP1 Series Bedienungsanleitung

Asus

Asus Eee Box B204 Bedienungsanleitung

Dell

Dell Optiplex 9010 All In One Bedienungsanleitung

Everex

Everex eXplora Bedienungsanleitung

Lenovo

Lenovo ThinkCentre M75e Bedienungsanleitung

Dell

Dell Alienware Area-51 R4 Bedienungsanleitung

Read Before Installation

Linux 7.1 for i2000 hp workstation

There are four types of installations available. In this document we follow a “Custom” Installation

Procedure. You will choose your partitioning scheme, format the newly created partitions, select and

install packages in the following procedure.

i2000 Installation Instructions for Linux

1. During the initial boot you will see a large Itanium logo; you can wait for the program to proceed

or press [ENTER]

2. At the opening display, you must select a boot option. Choose “efi” shell press [ENTER]

3. Choose the file system w/ CD-Rom and type <fs0:> or <fs1:> at prompt. [ENTER]

4. Start loader and type <elilo> at prompt. [ENTER] Displays ,“Loading SCSI Driver, Loading

QLA1280 driver”.

5. The installer software is loading. You will see an intermediate interface.

6. Select language [NEXT]

7. Choose the keyboard that best suits your system. [NEXT]

8. Choose the correct mouse for your system. [NEXT]

Hewlett-Packard Company

3404 East Harmony Road

Fort Collins, Colorado 80528-9599

Before you start the installation process, the following conditions must be met:

• Power on the i2000 workstation.

• Open the CD drive.

• Identify the installation CDs and insert CD #1.

• Leave accessory drive door open while installing Linux; CD-ROMs will

automatically eject during the install process

Refer to http://www.hp.com/workstations/support website for the latest

information on upgrading your pre-release operating system to the release

version.

9. Welcome to Linux [NEXT]

10. Install Options “custom system” [NEXT]

11. Automatic partitioning; “manually partition w/ disk druid” [NEXT]

12. Partitions

a. Select any and all partitions to remove and push “delete”

b. “Add” or “Delete” to complete & match the table below:

[select]

[select]

[select]

13. Choose Partitions to format; you may optionally check for bad blocks.

14. Choose your network card and whether you would like to configure using either DHCP (see

network admin.) or manually setup here. [NEXT]

15. Choose your security level; Firewall configuration select “no firewall” [NEXT]

16. You must select a language to use as the default Language; make selection [NEXT]

17. You can set your Time Zone selection by your computer’s physical location or by your time

zone’s offset from Universal Coordinated Time (UTC); click on map or select from list. [NEXT]

18. Assign account configuration; type root password and confirm [NEXT]

19. Select authentication configuration and fill out as appropriate;

a. enable MD5,

b. enable shadow passwords

c. enable NIS

Mount point Device Requested Actual Type

/boot/efi sda1 101M 101M 16-bit >= 32M

/ sda2 6000M 6000M Linux Native

<swap> sda5 1000M 1004M Linux Swap

20. Select package groups; in custom installation you are able to select which package groups.

a. Scroll to bottom of list,

b. Select “everything” [NEXT]

21. For unresolved dependencies; select [•] install packages to satisfy dependencies. [NEXT]

22. X configuration setup: Your video ram size cannot be auto-detected. Choose your video ram size

from the choices below. With nVIDIA GeForce2 (generic) adjust Video Card RAM: [ 32M ]

[NEXT]

23. X configuration, monitor;

a. This install will attempt to detect your monitor to determine your machine’s best display

settings.

b. Choose generic monitor to match 1280x1024 @ 74 Hz. or something that matches your

situation [NEXT]

24. Custom Configuration

a. set true color depth 24,

b. screen resolution 1280x1024

c. choose your default desktop environment

d. choose your login type [NEXT]

25. You will receive a display note; “About to Install” [NEXT] Once you click [Next], your hard

drive will be formatted and there is no going back.

26. Installing packages; expect 10-15 minute wait.

27. Switch to disk 2 once.

28. Congratulations, Installation is Complete. Press return to reboot.

29. Press [EXIT] ejects the Installation CD; store this in a secure location.

30. To reboot from the hard disk drive—type at the shell prompt:

efi shell> fs0:

fs0:> elilo reboot begins

A6037- 90015