HP Omni 27-1100 Bedienungsanleitung

The only warranties for Hewlett-Packard

products and services are set forth in the

express statements accompanying such

products and services. Nothing herein

should be construed as constituting an

additional warranty. HP shall not be liable

for technical or editorial errors or omissions

contained herein.

HP assumes no responsibility for the use or

reliability of its software on equipment that is

not furnished by HP.

This document contains proprietary

information that is protected by copyright.

No part of this document may be

photocopied, reproduced, or translated to

another language without the prior written

consent of HP.

Hewlett-Packard Company

P.O. Box 4010

Cupertino, CA 95015–4010

USA

Development Company, L.P.

This product incorporates copyright

protection technology that is protected by

U.S. patents and other intellectual property

rights. Use of this copyright protection must

be authorized by Macrovision, and is

intended for home and other limited viewing

uses only unless otherwise authorized by

Macrovision. Reverse engineering or

disassembly is prohibited.

Microsoft, the Windows logo, and Windows

are trademarks or registered trademarks of

the Microsoft group of companies in the

United States and/or other countries/

regions.

HP supports lawful use of technology and

does not endorse or encourage the use of

our products for purposes other than those

permitted by copyright law. The information

in this document is subject to change without

notice.

Part number: 671405–001

Version 1.0

Table of contents

1 Preparing the computer for wall-mounting ....................................................................... 1

What you need ....................................................................................................................... 1

Safety information .................................................................................................................... 1

Preparing to remove the computer stand ..................................................................................... 2

Removing the computer stand .................................................................................................... 2

2 Reinstalling the stand on the computer ............................................................................. 9

What you need ....................................................................................................................... 9

Safety information .................................................................................................................... 9

Removing the wall-mounting hardware ...................................................................................... 10

Replacing the computer stand .................................................................................................. 11

iii

1 Preparing the computer for wall-

mounting

This document provides instructions for preparing your HP All-in-One computer for wall-mounting. The

VESA mounting bracket is attached to the back of the computer. This bracket attaches to a wall-

mounting device (sold separately). You need to remove the computer stand before wall-mounting the

computer.

To convert the computer from a wall-mounted unit to desktop unit, follow the instructions in the

Reinstalling the stand on the computer on page 9. It is very important that you follow all the steps to

reinstall the computer stand.

What you need

●Wall-mounting device (sold separately) with the following specifications:

◦VESA standard 100 mm x 100 mm (3.9 in. x 3.9 in.) hole pattern

◦Designed for flat-panel displays ranging in size from 508 mm to 687 mm (20 in. to 27 in.)

diagonal, and weighing up to 22.7 kg (50 lb)

●A stable, flat surface to place the computer

●A soft, clean cloth (such as a clean, large towel) to protect the computer when you place it face

down

●Antistatic wrist strap and a conductive foam pad to stand on while working on the computer

(recommended)

●A Phillips #2 screwdriver (magnetic-tipped screwdriver recommended)

●Another person (the computer is heavy and might require two people to lift and move it)

Safety information

This product has not been evaluated for connection to an “IT” power system (an AC distribution system

with no direct connection to the earth, according to IEC 60950).

WARNING! Always disconnect the computer from the power source before removing the computer

stand. Failure to do so before you perform any procedures can result in personal injury or equipment

damage.

WARNING! Avoid touching sharp edges inside the computer.

WARNING! It is recommended that you use only UL-listed wall-mounting devices.

WARNING! The computer is heavy. Take proper precautions when lifting or moving the computer.

What you need 1

WARNING! Please read “Additional Safety Information” in the Limited Warranty and Support

Guide before installing and connecting your system to the electrical power system.

Preparing to remove the computer stand

To avoid injury and equipment damage when opening the computer, always complete the following

steps in order:

1. Remove any media and external devices (such as any CD, DVD, memory cards, USB devices, or

external hard disk drives) from the computer.

CAUTION: Static electricity can damage the electronic components of the computer or optional

equipment.

2. Ensure that you are discharged of static electricity by briefly touching a grounded metal object.

3. Click the Windows Start button and then select Shut Down.

WARNING! To reduce the risk of personal injury from electrical shock or hot surfaces,

disconnect the power cord from the wall outlet, and allow the internal system components to cool

before touching them.

4. After the system has completely shut down, disconnect the power adapter from the back of the

computer.

5. Disconnect all other attached cables from the back and side of the computer.

Removing the computer stand

To mount the all-in-one computer to the wall, you must remove the computer stand.

2 Chapter 1 Preparing the computer for wall-mounting

NOTE: Save the VESA cover, the computer stand, and the six screws, so that you can convert

the computer back to a desktop unit in the future. To reinstall the stand, follow all the steps in

Reinstalling the stand on the computer on page 9.

1. Place the computer facedown on a stable, flat surface that is covered with a soft cloth.

2. To remove the VESA cover, insert your finger into the slot just below the right bottom corner of the

cover (1), and pry the cover off the computer (2). You might have to exert force to release the

cover. Save the VESA cover.

Removing the computer stand 3

3. Loosen the two screws at the bottom that secure the back cover to the computer. Keep turning the

screwdriver until you hear five clicks. These clicks indicate that the screw is sufficiently loosened.

Do not attempt to remove the screw from the hole. If present, loosen the screw (1) at the center of

the back cover.

4. To remove the back cover from the computer, start lifting from the lower left corner.

NOTE: You might have to exert force to remove the back cover from the computer. There might

be a cracking sound as the back cover separates from the computer. The sound occurs when the

latch hooks on the back cover slide off the latch bases on the computer.

4 Chapter 1 Preparing the computer for wall-mounting

5. Remove the six screws that attach the stand to the computer. There are three screws each at the

bottom left and right of the computer. Save the screws.

6. Lift the stand slightly (1) and then disengage it from the hook on the left side (2). Remove the stand

from the computer. Save the stand.

Removing the computer stand 5

7. Remove the ring covers (1,2) from the lower center back of the computer.

8. Snap the ring covers into place on the lower corners of the computer.

6 Chapter 1 Preparing the computer for wall-mounting

Andere Handbücher für Omni 27-1100

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere HP Desktop Handbücher

HP RP9 G1 9115 Montageanleitung

HP Compaq 6000 Pro SFF Einrichtungshandbuch

HP Pavillion P590-0066 Leitfaden

HP LSI MegaRAID SAS 9260-8i Bedienungsanleitung

HP Pavilion t122 Bedienungsanleitung

HP 8000f - Elite Ultra-slim Desktop PC Gebrauchsanweisung

HP Compaq Presario Handbuch

HP Presario SR1200 - Desktop PC Bedienungsanleitung

HP Pavilion Slimline s3120n Handbuch

HP Brio BA210 Handbuch

HP Evo D510 e-pc Produkthandbuch

HP Pavilion t160 Bedienungsanleitung

HP TouchSmart IQ800 - Desktop PC Bedienungsanleitung

HP Personal Computer Bedienungsanleitung

HP A6700f - Pavilion - 4 GB RAM Gebrauchsanweisung

HP Vectra VEi 7 Produkthandbuch

HP A1224n - Pavilion - 1 GB RAM Bedienungsanleitung

HP t505 Montageanleitung

HP Kayak XU 03xx Bedienungsanleitung

HP ProOne 490 G3 Montageanleitung

HP PV738AA Bedienungs- und Wartungshandbuch

HP Vectra XU5 Handbuch

HP Desktop Pro A G2 Handbuch

HP Compaq d260 MT Bedienungsanleitung

Beliebte Desktop Handbücher anderer Marken

Asus

Asus E210 Series Bedienungsanleitung

Dell

Dell Inspiron 600m Bedienungsanleitung

Dell

Dell Inspiron 3662 Bedienungsanleitung

TotalFlow

TotalFlow uFLO Bedienungsanleitung

Logitech

Logitech MK320 Bedienungsanleitung

Dell

Dell XPS 730 H2C Bedienungsanleitung

Sony

Sony Vaio Series Bedienungsanleitung

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Bedienungsanleitung

Alto

Alto MD 250 Bedienungsanleitung

Lenovo

Lenovo ThinkCentre Edge 72 Handbuch

Lenovo

Lenovo ThinkStation D20 Handbuch

Arbor Technology

Arbor Technology FPC-7800 Series Bedienungsanleitung

Sony

Sony VAIO VGX-TP1 Series Bedienungsanleitung

Asus

Asus Eee Box B204 Bedienungsanleitung

Dell

Dell Optiplex 9010 All In One Bedienungsanleitung

Everex

Everex eXplora Bedienungsanleitung

Lenovo

Lenovo ThinkCentre M75e Bedienungsanleitung

Dell

Dell Alienware Area-51 R4 Bedienungsanleitung