HP I2000 Montageanleitung

Hewlett-Packard Company

3404 East Harmony Road

Fort Collins, Colorado 80528

Pub. No. A6037-90040

Read Before Installing

Microsoft©Windows©XP Installation Instructions

for HP i2000 Workstation Systems

Products Affected:

All HP i2000 Workstations that use C0 step Itanium™ processors.

Description:

When installing 64-bit Microsoft©Windows XP©, these instructions should be followed for proper operating

system installation and system functionality. NOTE: Windows XP must ﬁrst be installed on the system.

Instructions:

Using Windows CONFIGFLAG Setting (nvrboot utility)

Boot Option settings are stored in nonvolatile RAM (NVRAM). There is a program for setting nonvolatile

RAM named

nvrboot.eﬁ

Boot to the EFI prompt. In the EFI partition of the boot disk, cd to the MSUtil directory. Run nvrboot, and

the screen will appear as indicated below:

Note:

In the example below, lines 2 to 5 may look different or may not be present. Option 7 (Boot

Options) will always be present. In case the EFI option is not present, Boot Options can be used to add

it. Windows Boot Option will be added automatically during OS installation.

Note: Bold

letters are system prompts and underlined italics are user responses.

Shell

> fs0:

Fs0:\>

cd msutil

fs0:\MSUtil>

nvrboot

NVRBOOT: OS Boot Options Maintenance Tool (Revision: 1.0b)

1. Microsoft Windows Whistler Professional

2. VenHw(Unknown Device: 00)

3. VenHw(Unknown Device: FF)

4. VenHw(Unknown Device: FF)/CDROM(Entry 1)

5. VenHw(Unknown Device: 80)/HD(Part1,SigD87FA76A)

6. EFI

7. Boot Options Maintenance Menu

Windows OS Boot Option

(D)isplay (M)odify (C)opy E(x)port (I)mport (E)rase (P)ush (H)elp (Q)uit

Select>

Enter OS boot option to modify:

LoadIdentiﬁer = Microsoft Windows Whistler Professional

OsLoadOptions =

EﬁOsLoaderFilePath = \EFI\Microsoft\WINNT50\ia64ldr.eﬁ

OsLoaderFilePath = \WINDOWS

Enter var to modify:

OsLoadOptions =

/CONFIGFLAG=2943

LoadIdentiﬁer = Microsoft Windows Whistler Professional

OsLoadOptions = /CONFIGFLAG=2943

EﬁOsLoaderFilePath = \EFI\Microsoft\WINNT50\ia64ldr.eﬁ

OsLoaderFilePath = \WINDOWS

Press enter to continue

Select>

There are cases when you may want to turn on kernel debugging. This is also achieved by setting the

OsLoadOptions. In this case, care should be taken so that the Conﬁgﬂag option is the last command in the

string.

fs0:\MSUtil>

nvrboot

NVRBOOT: OS Boot Options Maintenance Tool (Revision: 1.0b)

1. Microsoft Windows Whistler Professional

2. VenHw(Unknown Device: 00)

3. VenHw(Unknown Device: FF)

4. VenHw(Unknown Device: FF)/CDROM(Entry 1)

5. VenHw(Unknown Device: 80)/HD(Part1,SigD87FA76A)

6. EFI

7. Boot Options Maintenance Menu

Windows OS Boot Option

(D)isplay (M)odify (C)opy E(x)port (I)mport (E)rase (P)ush (H)elp (Q)uit

Select>

Enter OS boot option to modify:

LoadIdentiﬁer = Microsoft Windows Whistler Professional

OsLoadOptions = / CONFIGFLAG=2943

EﬁOsLoaderFilePath = \EFI\Microsoft\WINNT50\ia64ldr.eﬁ

OsLoaderFilePath = \WINDOWS

Enter var to modify:

OsLoadOptions =

/debug /debugport=com1 /baudrate=115200 /CONFIGFLAG=2943

LoadIdentiﬁer = Microsoft Windows Whistler Professional

OsLoadOptions = /debug /debugport=com1 /baudrate=115200 /CONFIGFLAG=2943

EﬁOsLoaderFilePath = \EFI\Microsoft\WINNT50\ia64ldr.eﬁ

OsLoaderFilePath = \WINDOWS

Press enter to continue

Select>

After you quit from nvrboot, you will be in EFI prompt. Type ‘exit’ and press return. This will take you back to

the Boot Options menu. Select ‘Boot Options Maintenance Menu’ and once inside, simply exit. This will

read back the changes made using the nvrboot program.

Once the changes are made, they will be retained across boots, power-off etc. However, when a fresh OS

installation is done, the above procedure will have to be repeated, as OS installation will introduce a new

Windows Boot Option.

Technical Support

HP Technical Computing Division

Andere Handbücher für i2000

Inhaltsverzeichnis

Andere HP Desktop Handbücher

HP Compaq dc5800 Bedienungs- und Wartungshandbuch

HP Kayak XU800 Series Bedienungsanleitung

HP 9000 Series Bedienungsanleitung

HP Pavilion w1100 - Desktop PC Anleitung zur Verwendung

HP Z200 - Small Form Factor Workstation Referenzhandbuch

HP ThinkPad T43 Betriebsanleitung

HP Pavilion t172 Bedienungsanleitung

HP dx2040 - Microtower PC Bedienungsanleitung

HP Vectra VLi 8SF Bedienungsanleitung

HP Pavilion t448 Bedienungsanleitung

HP Pavilion a100 - Desktop PC Montageanleitung

HP Z420 Series Bedienungsanleitung

HP Presario All-in-One CQ1-2000 Technisches Datenblatt

HP 290 G1 SFF Business Montageanleitung

HP ProDesk 400 G1 Handbuch

HP Spectre x2 Handbuch

HP OMEN 25i Handbuch

HP ProLiant xw2x220c - Blade Workstation Handbuch

HP E-PC 42 Service-Handbuch

HP Vectra VL410 Bedienungsanleitung

HP Deskjet 3000 Bedienungsanleitung

HP Pavilion t360 Bedienungsanleitung

HP Compaq dx2700 Microtower and Small Form... Installationsanleitung

HP DC7600 - HP Bedienungsanleitung

Beliebte Desktop Handbücher anderer Marken

Asus

Asus E210 Series Bedienungsanleitung

Dell

Dell Inspiron 600m Bedienungsanleitung

Dell

Dell Inspiron 3662 Bedienungsanleitung

TotalFlow

TotalFlow uFLO Bedienungsanleitung

Logitech

Logitech MK320 Bedienungsanleitung

Dell

Dell XPS 730 H2C Bedienungsanleitung

Sony

Sony Vaio Series Bedienungsanleitung

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Bedienungsanleitung

Alto

Alto MD 250 Bedienungsanleitung

Lenovo

Lenovo ThinkCentre Edge 72 Handbuch

Lenovo

Lenovo ThinkStation D20 Handbuch

Arbor Technology

Arbor Technology FPC-7800 Series Bedienungsanleitung

Sony

Sony VAIO VGX-TP1 Series Bedienungsanleitung

Asus

Asus Eee Box B204 Bedienungsanleitung

Dell

Dell Optiplex 9010 All In One Bedienungsanleitung

Everex

Everex eXplora Bedienungsanleitung

Lenovo

Lenovo ThinkCentre M75e Bedienungsanleitung

Dell

Dell Alienware Area-51 R4 Bedienungsanleitung

HP i2000 Montageanleitung

Beliebte Desktop Handbücher anderer Marken