HP Vectra XA 5 Series Handbuch
Familiarization Guide
HP Vectra XA
5/xxx PC
HP Vectra XA MT PC
HP Vectra XA PC
This guide is for experienced technicians who have already
completed the HP Vectra computer family training course.
In particular, it assumes that the reader is already familiar
with the HP Vectra XA 6/xxx and HP Vectra XM 5/xxx
Series 4 PCs, which have a similar structure.
This document serves as a self-paced training guide,
designed to train you for repair of the computer, and only
contains repair-specific information. For information on the
installation of accessories, see the User’s Guide and the
online documents that are supplied with the computer.
Notice
The information contained in this document is subject to change without notice.
Hewlett-Packard makes no warranty of any kind with regard to this
material, including, but not limited to, the implied warranties of
merchantability and fitness for a particular purpose.
Hewlett-Packard shall not be liable for errors contained herein or for incidental
or consequential damages in connection with the furnishing, performance, or use
of this material.
Hewlett-Packard assumes no responsibility for the use or reliability of its
software on equipment that is not furnished by Hewlett-Packard.
This document contains proprietary information that is protected by copyright.
All rights are reserved. No part of this document may be photocopied,
reproduced, or translated to another language without the prior written consent
of Hewlett-Packard Company.
Centronics® is a registered trademark of Centronics Data Computer
Corporation.
Matrox® is a registered trademark of Matrox Electronic Systems Ltd.
MGATM is a trademark of Matrox Graphics Inc.
Microsoft®, Windows® and MS-DOS® are registered trademarks of Microsoft
Corporation.
MMXTM is a trademark of Intel Corporation.
NextStepTM is a trademark of Next Incorporated.
Novell® and Netware® are registered trademarks of Novell Inc.
OS/2TM is a trademark of International Business Machines Corporation.
Pentium® is a registered trademark of Intel Corporation.
SoundBlasterTM is a trademark of Creative Technology Limited.
Hewlett-Packard France
Performance Desktop Computing Orperation
38053 Grenoble Cedex 9
France
1997 Hewlett-Packard Company
1
HP Vectra XA 5/xxx PC
The major new hardware features are:
• New, high performance, Pentium MMX processor.
• 512 KB cache memory on all models.
• New and faster version of Matrox Millennium PCI graphics controller.
• New 10BT/100BT PCI network board on all models.
2
HP Vectra XA 5/xxx PC
External Features
External Features
Wty: WBK@
Sup: SAB@
Model XA 5/200
Prod: D3993A #ABA
S/N: FR63412345
Front label does not show processor
speed or series information. Instead
this information appears on a label
on the lower front recess (desktop
models) or on the right hand side
panel (minitower models).
Voltage selection Power connector
2 ✕USB
Network connectors:
100 BaseT supports Remote Wake-Up
(RWU) only.
10 BaseT supports Remote Power-On
(RPO) as well as RWU.
3
HP Vectra XA 5/xxx PC
Installing Main Memory Modules
Installing Main Memory Modules
• Each memory bank that you use must contain a pair of identical memory
modules, installed in the pair of sockets for that bank.
• The three memory banks (A, B, C) may be filled in any order, but it is ad-
visable, for performance reasons, to fill them in the order A then B then C.
• Memory can be upgraded in increments of 8 MB, 16 MB, 32 MB or 64 MB
(by installing pairs of 4 MB, 8 MB, 16 MB or 32 MB modules).
• HP does not support PCs in which the user has installed non-HP
memory modules.
Initial Configuration Example Upgrade Paths
Models are supplied with 16 MB or 32 MB
of main memory using a pair of 8 MB or
16 MB, 60 ns, EDO memory modules.
The main memory capacity can be extended
to 144 MB or 160 MB by installing a further
two pairs of 32 MB memory modules.
This can be further extended to 192 MB by
removing the original pair of modules, and
replacing them with a pair of 32 MB
modules.
C2 empty 32 MB
C1 empty 32 MB
B2 empty 32 MB
B1 empty 32 MB
A2 8 MB or 16 MB 8 MB or 16 MB
A1 8 MB or 16 MB 8 MB or 16 MB
Banks may be filled in any order, but it is
recommended to fill them in the order of A
then B then C.
Any banks which are occupied must always
be filled with a pair of modules of
identical capacity, type and speed.
Different banks can be occupied by different
capacities of modules, such as a pair of
32 MB modules, a pair of 16 MB modules,
and a bank of 32 MB modules.
C2 empty 32 MB
C1 empty 32 MB
B2 empty 4 MB
B1 empty 4 MB
A2 8 MB or 16 MB 8 MB or 16 MB
A1 8 MB or 16 MB 8 MB or 16 MB
4
HP Vectra XA 5/xxx PC
System Board
System Board
SW10
5
HP Vectra XA 5/xxx PC
Replacing the System Board
Replacing the System Board
Remove the old system board
Install the new system board
Update the product
identification field
Turn the PC off. Set SW10 of the
system board switches to closed.
Flash the System ROM with the latest version of the System BIOS
Turn the PC on. Wait until the
POST displays this message:
Turn the PC off. Set SW10 of the
system board switches to open.
Turn the PC on. Wait until the
POST stops at the 85% stage.
Select Vectra X series
from the menu.
Follow the instructions that are
displayed on the screen.
Product Flag cleared,
set switch to the
open position before
rebooting
0041-49 Invalid
internal product type,
correct with F2.
1.
2.
3.
4.
6
HP Vectra XA 5/xxx PC
MMX Processor
MMX Processor
The new P55C processors, from Intel, are Pentium processors, with the MMX
multimedia extension instructions added to the instruction set.
P55C processors require a different voltage supply. Only use the voltage
regulator model (VRM) that was supplied with the processor.
How to Identify the VRM
The 0950-3188 VRM has the characters “2.8V” marked on it. The 5063-7939
VRM has only the word “Pentium” or a voltage of the form “3.xxV” marked
on it.
How to Identify the Processor
HP Vectra XA PCs exist in two different
forms: one with a system board for a Pentium
or MMX processor, the other with a system
board for a Pentium Pro processor.
All models bear the same front panel logo. Other sources of information
must be sought, in order to ascertain what type of processor is installed.
• The serial label. This is found on the lower front recess of desktop models,
and on the lower part of the right side panel of minitower models. It gives
the following information:
❒Processor type (5/ = Pentium P54 or MMX P55; 6/ = Pentium Pro)
❒Processor frequency (/166 = 166 MHz; /200 = 200 MHz)
❒Product number (D3993A in the example).
The product number is particular useful, since it can be looked up in the
HP Vectra PC Service Handbook.
VRM 3.46 V VRM 2.8 V
P54CS/166 & P54CS/200 5063-7939 Not compatible
P55C/166 & P55C/200 Not compatible 0950-3188
Wty: WBK@
Sup: SAB@
Model XA 5/200
Prod: D3993A #ABA
S/N: FR63412345
7
HP Vectra XA 5/xxx PC
Precautions When Replacing the Power Supply
• The Intel Inside label. Only models containing an MMX (P55C) processor
have the MMX logo (shown at the top left of the previous page).
• The BIOS version number. This is displayed at the top of the summary
screen (obtained by typing whilst the initial Vectra logo is being dis-
played during the Power-On Self Test phase).
• The ultimate solution is to release the lever on the zero insertion force
(ZIF) socket, and to remove the heat-sink and processor together, as a
single unit. Look at the underside of the processor. Only P55Cs are
marked with the words “MMXTM tech”.
Precautions When Replacing the Power Supply
USB Connector
The HP Vectra XA 5/xxx and VL 5/xxx Series 5 PCs are the first Vectra PCs
to have a pair of USB connectors fitted as standard. When devices become
available on the market, they can be activated from the Setup program.
Model Processor BIOS Version Number
HP Vectra XA 5/xxx PC Pentium P54CS or MMX P55C HA.07.xx
HP Vectra XA 6/xxx PC Pentium Pro GZ.07.xx
With the minitower package, always check the position of the voltage
selection switch.
8
HP Vectra XA 5/xxx PC
Backplanes
Backplanes
XA Desktop (front view)
XA Desktop (rear view)
Half length PCI
(proprietary network)
slot
XA Minitower (top view)
Andere Handbücher für Vectra XA 5 Series
1
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere HP Desktop Handbücher
HP
HP c3700 - Workstation Bedienungsanleitung
HP
HP Compaq dc5750 Series Gebrauchsanweisung
HP
HP L1706i Bedienungsanleitung
HP
HP dx2300 - Microtower PC Bedienungsanleitung
HP
HP Vectra VEC 7 Betriebsanleitung
HP
HP Z Workstation series Bedienungsanleitung
HP
HP e3000 Installationshandbuch
HP
HP Brio 7100 Bedienungsanleitung
HP
HP EX470 - MediaSmart Server - 512 MB RAM Anleitung zur Verwendung
HP
HP Media Center Handbuch
HP
HP Spectre x2 Handbuch
HP
HP e-PC c10/s10 Service-Handbuch
HP
HP Pavilion t600 - Desktop PC Bedienungsanleitung
HP
HP dx7500 - Microtower PC Bedienungsanleitung
HP
HP Omni 200-5300 - Desktop PC Bedienungsanleitung
HP
HP s7700n - Pavilion - Slimline Technisches Datenblatt
HP
HP 175753-002 - iPAQ - 64 MB RAM Montageanleitung
HP
HP Pavilion Elite e9230f Bedienungsanleitung
HP
HP Compaq Presario Handbuch
HP
HP Vectra VE5 2 Produkthandbuch
