HP StorageWorks MSA2000 3.5 Bedienungsanleitung

Andere HP Gehäuse Handbücher

HP

HP BladeSystem c7000 Handbuch

HP

HP Clemco 60 Leitfaden

HP

HP Surestore FC10 - Disk Array Handbuch

HP

HP BladeSystem c3000 Gebrauchsanweisung

HP

HP 6400/8400 Bedienungsanleitung

HP

HP BladeSystem c3000 Bedienungsanleitung

HP

HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM Bedienungsanleitung

HP

HP Xw460c - ProLiant - Blade Workstation Bedienungs- und Sicherheitshinweise

HP

HP D6000 Disk Enclosure Bedienungsanleitung

HP

HP HPE D6020 Bedienungsanleitung

HP

HP NonStop G16SE Bedienungsanleitung

HP

HP HPE D6020 Handbuch

HP

HP Xw460c - ProLiant - Blade Workstation Installationsanleitung

HP

HP Visualize c3000 Gebrauchsanweisung

HP

HP A3765A Bedienungsanleitung

HP

HP BL260c - ProLiant - G5 Bedienungsanleitung

HP

HP StorageWorks 7110 - Virtual Array Leitfaden

HP

HP 418800-B21 - StorageWorks Modular Smart Array 70 Storage... Handbuch

HP

HP BladeSystem bc2800 - Blade PC Bedienungsanleitung

HP

HP BladeSystem c7000 Bedienungs- und Sicherheitshinweise

HP

HP Clemco 60 Bedienungsanleitung

HP

HP 418800-B21 - StorageWorks Modular Smart Array 70 Storage... Anleitung zur Verwendung

HP

HP D6000 Disk Enclosure Bedienungsanleitung

HP

HP Clemco 60 Leitfaden

Beliebte Gehäuse Handbücher anderer Marken

SilentiumPC

SilentiumPC Armis AR5 Handbuch

Pulsar

Pulsar 17/TRP80/DSPR Bedienungsanleitung

Thermaltake

Thermaltake V150 TG Bedienungsanleitung

MSI

MSI MPG SEKIRA 500X Bedienungsanleitung

Antec

Antec Dark fleet DF-10 Bedienungsanleitung

Peavey

Peavey DS 1502 Bedienungsanleitung

D-Link

D-Link ShareCenter Pro DNS-1550-04 Bedienungsanleitung

Rosewill

Rosewill RX82-U(JBOD) Bedienungsanleitung

QNAP

QNAP SAS JBOD CLI 1.0 Bedienungsanleitung

GAMDIAS

GAMDIAS Talos P1 Bedienungsanleitung

Auvs

Auvs KR615 Bedienungsanleitung

Digitus

Digitus DA-71114 Bedienungsanleitung

CommScope

CommScope FDH 3000 Bedienungsanleitung

FS

FS FHD-FWME4 Bedienungsanleitung

JBL

JBL CS1215T Bedienungsanleitung

Pulsar

Pulsar ARAD-S4 Bedienungsanleitung

Pulsar

Pulsar AWO454 Bedienungsanleitung

NewerTech

NewerTech Voyager S3 Bedienungsanleitung

Page 1

481603-002

About this document

This document describes the procedure for installing an I/O module

into an HP StorageWorks MSA2000 3.5 12-drive enclosure.

IMPORTANT: Install this module only into an MSA2000 3.5

12- d r iv e e n c l o s u r e .

CAUTION: Parts can be damaged by electrostatic discharge.

Use proper anti-static protection.

•Keep the replacement component in the ESD bag until needed.

•Wear an ESD wrist strap grounded to an unpainted surface of

the chassis.

•If an ESD wrist strap is unavailable, touch an unpainted surface

of the chassis before handling the component.

•Never touch connector pins.

Removing the air management blank

CAUTION: When upgrading an existing operational system

with an I/O module, removing the blank impacts the airflow and

cooling ability of the device. To avoid possible overheating, insert

the I/O module as quickly as possible. If the internal temperature

exceeds acceptable limits, the enclosure may overheat and

automatically shut down or restart.

NOTE: For clarity, only relevant details are shown in these

illustrations.

1. Turn the thumbscrews until the screws disengage from the blank.

2. Press both latches downward.

3. Pull the blank straight out of the enclosure.

1Latch 2Thumbscrew

12 12

Printed on at least 50% total recycled fiber with at least 10%

post-consumer paper

© Copyright 2008 Hewlett-Packard Development Company, L.P.

Second edition: November, 2008

Product names mentioned herein may be trademarks of their

respective companies as reflected by an associated footnote. The

information in this document is subject to change without notice.

Printed in China.

www.hp.com

HP StorageWorks

MSA2000 3.5 12-Drive

Enclosure

I/O module installation

instructions

Page 2

Installing the I/O module

1. Loosen the thumbscrews; press the latches downward.

2. Slide the I/O module into the enclosure as far as it will go (1).

3. Press the latches upward to engage the I/O module (2); turn the

thumbscrews finger-tight.

4. Connect cables according to a supported configuration. See the

user guide.

Verifying I/O module status

In an operational system, once the I/O module is installed and

cabled:

•Verify that the heartbeat LED on the front of the enclosure is

green.

•Verify that the OK LED on the back of the new I/O module is

green.

Additional information

See the MSA web site: http://www.hp.com/go/msa.

2

1

2