HP 37718A OmniBER 718 Installations- und Betriebshandbuch

HP 37718A/37719A

Communications

Performance Analyzer

Installation and

Veriﬁcation

Manual

Hewlett-Packard Limited

Telecommunications Networks Test Division

South Queensferry

West Lothian, Scotland EH30 9TG

Copyright Hewlett-

Packard Ltd.1998

Reproduction, adaption, or

translation without prior

written permission is

prohibited, except as

allowed under the

HP Part No. 37718-90006

First Edition, October 98

Printed in U.K.

Documentation

Warranty

The information contained

in this document is subject

to change without notice.

Hewlett-Packard makes no

warranty of any kind with

regard to this material,

including, but not limited

to, the implied warranties

or merchantability and

ﬁtness for a particular

purpose.

Hewlett-Packard shall not

be liable for errors

contained herein or for

incidental or consequential

damages in connection

with the furnishing,

performance, or use of this

material.

WARNING

For details of safety, see

Safety information in this

manual.

Installation and Veriﬁcation Manual

HP 37718A/37719A

Communications Performance

Analyzer

HP Part Number 37718-90006

Printed in U.K.October 1998

Contents

iii

1 General Information

Warranty 1-1

Responsibilities of the Customer 1-2

Certiﬁcation 1-3

Assistance 1-3

Notice 1-3

Restricted Rights Legend 1-3

Instruments Covered By Manual 1-4

Storage and Shipment 1-4

Repackaging for Shipment 1-4

Weight and Dimensions 1-5

Safety Precautions for the Operator 1-6

Lifting/Carrying the HP 37718A/19A 1-6

Safety Symbols 1-7

Operators Maintenance 1-8

Cleaning 1-8

Power Supply Fuse Replacement 1-9

Statement of Compliance 1-10

Australian EMC Regulations 1-10

Noise Declaration (German) 1-10

Electromagnetic Compatibility 1-11

Electrostatic Discharge 1-11

Speciﬁcations 1-14

2 Installation

Initial Inspection 2-1

Operating Environment 2-2

Preparation for Use 2-3

Power Requirements 2-3

Contents

Fuses 2-3

Fuse Replacement 2-3

Connecting to the Power Supply 2-4

Connecting to the Network 2-6

All Connectors 2-6

Electrical Interface Connectors 2-6

Optical Interface Connectors 2-9

Connecting Accessories 2-11

10 Base-T Lan Connection Radiated Emissions 2-11

Hewlett-Packard Interface Bus 2-12

Additional Precautions for Service Engineers 2-14

Safety Precautions 2-14

ESD Precautions 2-14

3 Performance Tests

Introduction 3-1

Equipment Required 3-1

Performance Test Record 3-1

Calibration Cycle 3-1

Recall Default Settings 3-1

Self Test 3-3

Description 3-3

PDH/DSn Internal Transmitter Clock Accuracy & Offset 3-8

Speciﬁcations 3-8

Description 3-8

Equipment Required 3-8

Procedure 3-9

E1 (2.048Mb/s) Frequency Accuracy 3-9

E2 (8.448Mb/s) Frequency Accuracy 3-10

E3 (34.368Mb/s) Frequency Accuracy 3-10

E4 (139.264Mb/s) Frequency Accuracy 3-11

Contents

DS1 (1.544Mb/s) Frequency Accuracy 3-11

DS3 (44.736Mb/s) Frequency Accuracy 3-12

PDH/DSn Transmitter Output 3-13

Speciﬁcation 3-13

Description 3-13

Equipment Required 3-14

Procedure 3-14

Procedure - 34.368 Mb/s 3-17

Procedure - 8.448 Mb/s 3-19

Procedure - 2.048 Mb/s 3-21

Procedure - DSX-3 3-23

Procedure - DSX-1 3-25

PDH/DSn Receiver Equalization 3-29

Speciﬁcations 3-29

Description 3-29

Equipment Required 3-29

Procedure 3-30

PDH/DSn Receiver Monitor Levels 3-33

Speciﬁcations 3-33

Description 3-33

Equipment Required 3-33

Procedure 3-34

External Mux/Demux 3-38

Speciﬁcations 3-38

Description 3-38

Equipment Required 3-38

Procedure 3-39

PDH/DSn Frequency Measurement and Looped Clock 3-47

Speciﬁcations 3-47

Description 3-47

Equipment Required 3-47

Procedure 3-47

SDH/SONET Transmitter Clock Accuracy 3-51

Contents

Speciﬁcation 3-51

Description 3-51

Equipment Required 3-51

Procedure 3-51

External Clock/Data Reference Inputs & Clock Reference Output 3-

Speciﬁcations 3-52

Description 3-52

Equipment Required 3-52

Procedure 3-53

SDH/SONET Frequency Offsets 3-57

Speciﬁcations 3-57

Description 3-57

Equipment Required 3-57

Procedure 3-57

STM-0/STS-1 Transmitter Output Waveshape 3-59

Speciﬁcations 3-59

Description 3-59

Equipment Required 3-59

Procedure 3-59

STM-1/STS-3 Transmitter Output Waveshape 3-62

Speciﬁcations 3-62

Description 3-62

Equipment Required 3-62

Procedure 3-62

SDH/SONET Receiver Equalization 3-66

Speciﬁcations 3-66

Description 3-66

Equipment Required 3-66

Procedure 3-66

Procedure 3-67

SDH/SONET Receiver Monitor Levels 3-68

Speciﬁcations 3-68

Contents

vii

Description 3-68

Equipment Required 3-68

Procedure 3-68

Multirate Optical Interfaces 3-71

Speciﬁcation (1310 nm Transmitter) 3-71

Speciﬁcation (1550 nm Transmitter) 3-71

Speciﬁcation (Receiver) 3-71

Description 3-72

Equipment Required 3-72

Performance Test Record 3-77

4 Terms

ITU-T / ANSI Equivalent Terms 4-1

Current / Previous Terminology 4-3

viii

Contents

Andere Handbücher für 37718A OmniBER 718

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung