HP 8590 E-Series Bedienungsanleitung

Keysight 8591EM Manual

Get Pricing & Availability at

ApexWaves.com

Call Today: 1-800-915-6216

Email: sales@apexwaves.com

https://www.apexwaves.com/analyzers/keysight-technologies/859x-series/8591EM

Errata

Title & Document Type: 8590 EM Series EMC Quick Reference Guide

Manual Part Number: 5963-2929

Revision Date: August 1995

HP References in this Manual

This manual may contain references to HP or Hewlett-Packard. Please note that

Hewlett-Packard's former test and measurement, semiconductor products and chemical

analysis businesses are now part of Agilent Technologies. We have made no changes to

this manual copy. The HP XXXX referred to in this document is now the Agilent XXXX.

For example, model number HP8648A is now model number Agilent 8648A.

About this Manual

We’ve added this manual to the Agilent website in an effort to help you support your

product. This manual provides the best information we could find. It may be incomplete

or contain dated information, and the scan quality may not be ideal. If we find a better

copy in the future, we will add it to the Agilent website.

Support for Your Product

Agilent no longer sells or supports this product. You will find any other available product

information on the Agilent Test & Measurement website:

www.tm.agilent.com

Search for the model number of this product, and the resulting product page will guide

you to any available information. Our service centers may be able to perform calibration

if no repair parts are needed, but no other support from Agilent is available

About this Manual

We’ve added this manual to the Agilent website in an effort to help you support

your product. This manual is the best copy we could find; it may be incomplete

or contain dated information. If we find a more recent copy in the future, we will

add it to the Agilent website.

Support for Your Product

Agilent no longer sells or supports this product. Our service centers may be able

to perform calibration if no repair parts are needed, but no other support from

Agilent is available. You will find any other available product information on the

Agilent Test & Measurement website, www.tm.agilent.com.

HP References in this Manual

This manual may contain references to HP or Hewlett-Packard. Please note that

Hewlett-Packard's former test and measurement, semiconductor products and

chemical analysis businesses are now part of Agilent Technologies. We have

made no changes to this manual copy. In other documentation, to reduce

potential confusion, the only change to product numbers and names has been in

the company name prefix: where a product number/name was HP XXXX the

current name/number is now Agilent XXXX. For example, model number

HP8648A is now model number Agilent 8648A.

Quick Reference Guide

HP 8590 EM Series EMC Analyzer

ABCDE

HP Part No. 5963-2929

Printed in USA August 1995

Notice

The information contained in this document is subject to change without notice.

Hewlett-Packard makes no warranty of any kind with regard to this material,

including but not limited to, the implied warranties of merchantability and

tness for aparticular purpose

.Hewlett-P

ackard shall not be liable for errors

contained herein or for incidental or consequential damages in connection with

the furnishing, performance, or use of this material.

Restricted Rights Legend.

Use, duplication, or disclosure by the U.S. Government is subject to restrictions

as set forth in subparagraph (c) (1) (ii) of the Rights of Technical Data and

Computer Software clause at DFARS 252.227-7013 for DOD agencies, and

subparagraphs (c) (1) and (c) (2) of the Commercial Computer Software

Restricted Rights clause at FAR 52.227-19 for other agencies.



written permission is prohibited, except as allowed under the copyright laws.

1400 Fountaingrove Parkway, Santa Rosa, CA 95403-1799, USA

Introduction

This guide provides aquick reference for experienced analyzer users.

Chapter 1summarizes the front-panel features

,and tells how to make a basic

measurement and how to perform the self-calibration routines.

Chapter 2contains brief descriptions of the EMC analyzer functions.

Chapter 3contains the remote programming commands.

Appendixes A, B

, C, and D contain helpful charts and tables.

Appendix E contains diagrams of the key menus for the HP 8590 EM Series

EMC analyzers

or additional instrument information, consult the

HP 8590 EM Series EMC

Analyzer User's Guide

for your specic instrument.

Guide Terms and Conventions

The six keys along the right side of the display are called softkeys. Their labels

are displayed on the screen. The softkeys appear in shaded boxes in this guide.

An example of asoftkey is

NNNNNNNNNNNNNNNNNNNNNNN

REF LVL

.The labeled keys that are on the front

panel of the analyzer are called front-panel keys. Pressing a front panel key

changes the softkey labels or initiates functions. The front-panel keys appear in

unshaded boxes in this guide. An example of a front-panel key is

FREQUENCY

Caution

The input of the EMC analyzer can be damaged easily.When

using aline impedance stabilization network (LISN) device with

the EMC analyzer, disconnect the analyzer from the LISN device

before changing either the switch position on, or the voltage to,

the LISN device.

iii

NOTES

Contents

1. Getting Acquainted with the EMC Analyzer

Front-Panel Features . . . . . . . . . . . . . . . . . . . . . . 1-1

EMC Analyzer Screen Annotation . . . . . . . . . . . . . . . . 1-4

Making a Basic Measurement . . . . . . . . . . . . . . . . . . 1-7

Performing Self-Calibration Routines .... .. .. .. .. .. 1-11

Warm-Up Time ....................... 1-11

Self-Calibration Routines ............ .. .. .. . 1-11

Self-Calibration Routine Problems ............... 1-12

erforming the Tracking Generator Self-Calibration Routine

(Option 010) ............ .. .. .. .. .. . 1-13

Spectrum Analyzer Mode Screen Annotation ........ .. 1-14

2. EMC Analyzer Functions

Analyzer Functions ...................... 2-1

3. Programming Commands

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

How to Use This Chapter . . . . . . . . . . . . . . . . . . . . 3-1

Notation Conventions .................... 3-2

Syntax Conventions .... .. .. .. .. .. .. .. .. . 3-2

Functional Index ....................... 3-6

AMPLITUDE .... .. .. .. .. .. .. .. .. .. .. 3-6

AUTO COUPLING ...................... 3-7

AUXILIARY CONTROL .... .. .. .. .. .. .. .. .. 3-7

BANDWIDTH .... .. .. .. .. .. .. .. .. .. .. 3-8

CALIBRATION... .. .. .. .. .. .. .. .. .. .. . 3-8

COMMAND TRIGGER .................... 3-9

CONFIGURATION .. .. .. .. .. .. .. .. .. .. .. 3-9

DISPLAY .......................... 3-10

EMC MEASUREMENTS ... .. .. .. . .. .. .. .. . 3-10

EMCOUTPUT.. .. .. .. .. . .. .. .. .. .. .. . 3-11

FREQUENCY ........................ 3-11

Contents-1

GRAPHICS .... .. .. .. .. .. .. .. .. .. .. . 3-12

INFORMATION ....................... 3-12

INPUT and OUTPUT . . . . . . . . . . . . . . . . . . . . . 3-13

LIMIT LINES ... .. .. .. .. . .. .. .. .. .. .. 3-14

MARKER .... .. .. .. .. .. .. .. .. .. .. . . 3-15

MATH... .. .. .. .. .. .. .. . .. .. .. .. .. 3-16

MEASURE/USER ...................... 3-17

MODE............................ 3-17

OPERATOR ENTRY ..................... 3-17

PLOTTER . . . . . . . . . . . . . . . . . . . . . . . . . . 3-18

PRESET . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-18

PRINTER .......................... 3-18

PROGRAM FLOW ....... .. .. .. .. .. .. . .. 3-18

RECALL or SA

VE ...................... 3-19

SIGNAL LIST ........................ 3-19

AN ...... .. .. .. .. . .. .. .. .. .. .. . 3-20

SWEEP ........................... 3-20

SYNCHRONIZATION ..................... 3-21

TRACE ........................... 3-21

TRACE MATH .... .. .. .. .. .. .. .. .. .. .. 3-22

TRIGGER ... .. .. . .. .. .. .. .. .. .. .. .. 3-23

USER-DEFINED . . . . . . . . . . . . . . . . . . . . . . . 3-23

WINDOWS ............... .. .. .. .. .. 3-24

Programming Codes ............. .. .. .. .. . 3-25

Characters and Secondary Keywords (Reserved Words) Summary . 3-78

A. EMC Analyzer Error Messages

Error Messages ........................ A-1

Nonrecoverable System Errors ... . .. .. .. .. .. .. . A-15

.AM, FM, and Pulsed RF Reference Charts

C. Cross Reference of Programming Command to Key Function

D. Locating a Softkey

E. Key Menus

Index

Contents-2

Figures

1-1. Front-Panel Feature Overview ................ 1-2

1-2. EMC Analyzer Screen Annotation . . . . . . . . . . . . . . . 1-4

1-3. Placing the Marker on a Signal ................ 1-8

1-4. Displaying a List on the Screen . . . . . . . . . . . . . . . . 1-9

1-5. Displaying the List as a Log Graph .............. 1-10

1-6. Spectrum Analyzer Mode Screen Annotation .........1-14

B-1. P

ercent Modulation ..................... B-2

B-2. Bessel Null Graph .............. .. .. .. .. B-4

B-3. Loss in Sensitivity (Pulsed RF versus CW) .......... . B-5

B-4. IF BW Setting for Pulsed RF Computed from t

B=0.1 .....B-6

Tables

1-1. EMC Analyzer Screen Annotation . . . . . . . . . . . . . . . 1-5

1-2. Screen Annotation for Trace, Trigger, and Sweep Modes .... 1-6

1-3. Spectrum Analyzer Mode Screen Annotation ......... 1-15

1-4. Screen Annotation for Trace, Trigger, and Sweep Modes .... 1-16

B-1. Determining Amplitude Modulation . . . . . . . . . . . . . . B-1

B-2. Carrier and First Sideband Charts for Calibrating Deviation . . . B-3

C-1. Cross Reference of Programming Command to Key Function .. C-1

D-1. Softkey Locations ...................... D-1

Contents-3

Andere Handbücher für 8590 E-Series

Inhaltsverzeichnis

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung