HP FlexNetwork MSR3012 Bedienungsanleitung

Dieses Handbuch passt für folgende Modelle

4

Andere HP Netzwerk-Router Handbücher

HP

HP MSR SERIES Bedienungsanleitung

HP

HP FlexNetwork MSR Series Bedienungsanleitung

HP

HP ProCurve Networking J8454A Bedienungsanleitung

HP

HP J2600A Bedienungsanleitung

HP

HP N1200 - StorageWorks Network Storage Router Bedienungsanleitung

HP

HP A-MSR20 Bedienungsanleitung

HP

HP A8800 Series Bedienungsanleitung

HP

HP 5920 Bedienungsanleitung

HP

HP J3138A Bedienungsanleitung

HP

HP MSR954 Series Bedienungsanleitung

HP

HP FlexNetwork MSR Series Installationshandbuch

HP

HP StorageWorks MPX200 Bedienungsanleitung

HP

HP Series 200 Benutzerhandbuch

HP

HP MSR93x Series Bedienungsanleitung

HP

HP MSR20-10 Bedienungsanleitung

HP

HP StorageWorks MPX200 Programmierhandbuch

HP

HP MSR SERIES Installationshandbuch

HP

HP A8800 Series Installationshandbuch

HP

HP 5120 SI Series Bedienungsanleitung

HP

HP StorageWorks MPX200 Bedienungsanleitung

HP

HP MSR20-20 Bedienungsanleitung

HP

HP VSR1000 Bedienungsanleitung

HP

HP MSR93x Series Bedienungsanleitung

HP

HP Compaq Presario,Presario 650 Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung

Install front mounting brackets and the load-bearing screws for rear mounting brackets.

Mount the router to the rack.

Supplied mounting brackets and the installation modes depend on your device

model.

MSR3012/3024

MSR3044

MSR3064

!

Router depth smaller

than rack depth.

Router depth greater than

rack depth

Exchange left and right rear

mounting brackets.

3

4

Connecting the Grounding Cable

Correctly connecting the router grounding cable is crucial to lightning protection

and EMI protection.

To connect the grounding cable when you mount the router on a workbench:

1. Connect one end of the grounding cable to the router and secure it with the

grounding screw supplied with the router.

2. Connect the other end of the grounding cable to a building grounding device.

If the installation site has no grounding strips, but earth ground is available,

hammer an angle iron or steel tube into the earth ground to serve as a

grounding conductor.

!

To connect the power cable

for rack-mounting:

1. Connect the building

grounding cable to the

grounding strip on the rack.

2. Connect one end of the

grounding cable to the

router and the other end to

the grounding strip on the

rack.

Make sure the rack is properly

grounded.

Installing an Interface Card

If you remove the slot divider

between SIC slots 1 and 2 or 3 and

4 on an MSR3024/3044/3064, you

can install a DSIC interface card.

DSIC interface cards are not hot

swappable.

SIC interface cards are not hot

swappable.

HMIM interface cards on the

MSR3024/3044/3064 are hot

swappable.

AC power module DC power module

Installing the power module

MSR3044/3064 supports two power

modules for redundancy. The power

modules are hot swappable.

PWR2

To install a power

module:

1. Remove the filler

panel (if any).

2. Insert the AC/DC

power module.

3. Fasten the captive

screw.

MSR3012/3024 uses built-in power

modules.

MSR3044

PWR1

5

6

Connecting the Power Cable

Before connecting the power cable, make sure the router is properly grounded.

Make sure the power switch is off and connect the power cable to the router first

and then to the equipment-room power supply system to avoid bodily injury.

The power cord in the figure is only for illustration.

If you remove the filler module next to the

PWR1 slot, you can install a PoE power

module.

PoE power module

Filler module

To connect the power cable for rack-mounting:

1. Connect one end of the power cable to the router and the other end to the

power source.

2. Use a removable cable tie to secure the power cable plug to the power module.

Attach labels to both ends of the power cable.

To connect the power cable when you mount the router on a workbench:

1. Connect one end of the power cable to the router and the other end to the

power source.

2. Use a removable cable tie to secure the power cable plug to the power module.

Arrange the power cables neatly and keep them away from high-temperature,

wet, or sharp objects.

5998-8796