HP DesignJet 700 Bedienungsanleitung

Company confidential. Murillo/Ravillo QRG. Edition 1. Freeze status: not frozen.

This is the black on outside front cover

This is the yellow on outside front cover

HP DesignJet 700 and

HP DesignJet 750C Plus Plotters

Quick Reference Guide



Company confidential. Murillo/Ravillo QRG. Edition 1 Freeze status: not frozen

This page (inside back cover) black only

About This Edition

Edition dates are as follows:

First edition, September 1996

New editions are complete revisions of

the document. Change sheets, which

may be issued between editions,

contain additional information. The

dates on the title page change only

when a new edition is published. Minor

corrections that do not affect the

function of the product may be made at

reprint without a change to the print

date.

Many product updates and fixes do not

require document changes and,

conversely, corrections to user

documentation may be made without

accompanying product changes.

Therefore, do not expect a one–to–one

correspondence between product

updates and document revisions.

Company confidential. Murillo QRG. Edition 1. Freeze Status: not frozen

This is the cyan on page 1 (seq: 1)

This is the black on page 1 (seq: 1)

  

Localization Note. After putting your own part number at the top, write your own language

in English

, e.g. German (not Deutsch), as this is for the printer not the user.

C4705‘–90041 English

HP DesignJet 700 and

HP DesignJet 750C Plus Plotters

C4507A, C4706A, C4708A C4709A

Company confidential. Murillo QRG. Edition 1. Freeze Status: not frozen

This is the cyan on page 2 (seq: 2)

This is the black on page 2 (seq: 2)

Contents

      

To Change a Roll of Me ia 3

To Loa Roll Me ia 5

To Unloa a Plot on Roll Me ia 7

To Unloa Unuse Roll Me ia 7

Supporte Me ia Sizes an Margin Settings 7

To Loa a Sheet 8

To Loa Me ia the Right Way Up 9

To Unloa a Sheet after Plotting 10

To Remove an Unuse Sheet 11

Supporte Me ia Types 12

Me ia Characteristics an Print Quality Selection 13

"    

 $"  $ "$ %$& 

To Change the Print Quality Setting 15

Print Resolution 16

  %"  $# 

To Use the Queue to Manage Your Plots 17

To Use Nesting to Save Me ia 17

To Cancel a Plot 18

To Replot or Delete a Plot 18

To Pause while Printing a Series of Plots 18

! "$"# 

To Access the Cartri ges 19

To Check a Cartri ge's Ink Level 19

To Remove a Cartri ge 19

To Loa a Cartri ge 20

 " $  

To Use the FrontĆPanel Display Keys 21

To Enter the Menu System 21

FrontĆPanel Menu Structure 22

" $  %$  " 

Company confidential. Murillo QRG. Edition 1. Freeze Status: not frozen

This is the cyan on page 3 (seq: 3)

This is the black on page 3 (seq: 3)

Loading and Unloading Media

To Change a Roll of Media

Make sure the plotter wheels are locked, by firmly pressing down the

brake levers on the wheels.

1837a 0022

Continued...

1Remove any unused media from the media path as shown on page

2Remove the old roll by pulling firmly on each end of the spindle.

3Rest the old roll upright on the

floor with media stop (A) at

the top.

4Pull out the media stop/spindle

and set it aside.

5Remove the end–cap (B) from the other

end of the old roll.

0021

Localization Note. Graphics on this page have been taken from the 750C English User’s

Guide pages 3–10 and 3–11.

Company confidential. Murillo QRG. Edition 1. Freeze Status: not frozen

This is the cyan on page 4 (seq: 4)

This is the black on page 4 (seq: 4)

6Rest the spindle upright on the

floor with media stop (A) at the

bottom

7Place the new roll on the spindle,

so that the media’s leading edge

winds clockwise, viewed from

above.

If the media stop (A) falls off,

push it back in until it snaps into

position.

8Push the end–cap back in, so

that the tabs are flush against

the end of the roll.

9Insert the spindle with media stop (A) to the right and

end–cap (B) to the left. Push in firmly on both ends, making

sure the media remains flush against media stop (A).

The media should wind up from behind the roll.

0015 1837 0016

Localization Note. Graphics on this page have been taken from the 750C English User’s

Guide pages 3–11 and 3–12..

Company confidential. Murillo QRG. Edition 1. Freeze Status: not frozen

This is the cyan on page 5 (seq: 5)

This is the black on page 5 (seq: 5)

To Load Roll Media

1Hold the media by both edges and align its right edge with the

perforated line on the entry platen.

2Insert the media into the plotter, until it buckles slightly.

1839

3When the plotter begins to pull in the media, let it go.

4Press next to the front-panel display to indicate you are

loading roll media.

Sheet load

Roll load ↓

↑

––––––––>

5Scroll until the display shows the type of media you are

loading*, and then press the Enter key.

*For advice on media types, see pages 12 and 13.

SELECT MEDIA

Opaque bond

Enter

↓

↑

Continued...

Media path0017

0014

Localization Note. Graphics and some of the text on this page have been taken from the

750C English User’s Guide pages 3–14 and 3–15. “release it” changed to “let it go”. Steps

1,2 and 3 changed. *footnote added. The rest the same as Loquillo/750C QRG.

Company confidential. Murillo QRG. Edition 1. Freeze Status: not frozen

This is the cyan on page 6 (seq: 6)

This is the black on page 6 (seq: 6)

6When the display tells you to, lift the media lever.

7Take hold of the edges of the media now extending from the exit

slot and pull it toward you until taut. Then align its edges with

those of the roll.

8When the display tells you to, lower the media lever.

9When the display tells you to close the roll cover, take up any

slack by turning the media stop in the direction of the large

arrow. Close the cover, keeping the leading edge of the media

outside.

10 Press ↓to continue.

The plotter trims off the first few inches of media.

0018 1840

Media lever

Localization Note. Graphics and some of the text on this page have been taken from the

750C English User’s Guide pages 3–15 and 3–16. “instructs” changed to “tells”. Steps 7, 8

and 9 changed; rest as per 750C QRG.

Company confidential. Murillo QRG. Edition 1. Freeze Status: not frozen

This is the cyan on page 7 (seq: 7)

This is the black on page 7 (seq: 7)

To Unload a Plot on Roll Media

When you use roll media, the plotter automatically waits until the

required drying time has elapsed before cutting the media and dropping

the plot into the media bin. If you wish to adjust the drying times, refer

to the User’s Guide.

To Unload Unused Roll Media

1Raise the media lever to release the media.

2Open the roll cover and turn the media stop to wind the media out

of the plotter and onto the roll.

Raise the media lever

Wind the roll

3Lower the media lever.

1840a

Supported Media Sizes and Margin Settings

Media Width (Carriage Axis) Media Length (Paper Axis)

E/A0–size plotter: 190—917 mm

(7.5 in—36.1 in) Roll: 210 mm—15.2 m

(8.3 in—50 ft)

D/A1–size plotter: 190—625 mm

(7.5 in—24.6 in) Sheet: 210 mm—1.6 m

(8.3 in—64 in)

Leading and Trailing Edges Side Margins

Normal: 17 mm (0.67 in) 5 mm (0.2 in)

Smaller (roll media only): 10 mm (0.39 in) 5 mm (0.2 in)

All the above measurements are 2 mm (0.08 in). For plotting area

(media size minus margins) see User’s Guide.

Localization Note. Graphic from 750C English User’s Guide page 3–9, . “Unplotted”

changed to “unused”. Treat first paragraph as new Table completely revamped.

Company confidential. Murillo QRG. Edition 1. Freeze Status: not frozen

This is the cyan on page 8 (seq: 8)

This is the black on page 8 (seq: 8)

To Load a Sheet

You can load a sheet in either portrait or landscape orientation:

Note: If you are using the Rotate option (see User’s Guide), this

will influence the orientation of your print.

The plotter prints on the underside of the sheet. If the two sides of

your media are different, make sure the printing side is underneath

(see page 9).

1Make sure the media lever is down and the roll cover is closed.

2Hold the sheet by the sides and align the right edge with the

perforated line on the entry platen.

3Insert the media until it buckles slightly.

1841

4When the plotter begins to pull in the sheet, let it go.

Press ↑next to the front-panel display to indicate you are loading

a sheet.

0014

Sheet load

Roll load ↓

↑

––––––––>

Localization Note. Graphics from 750C English User’s Guide page 3–17 and 3–18.All text

identical to 750C/QRG.

Andere Handbücher für DesignJet 700

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere HP Plotter Handbücher

HP 7585B Bedienungsanleitung

HP DesignJet 650C C2858B Gebrauchsanweisung

HP DesignJet 250C Bedienungsanleitung

HP 7470A Betriebsanleitung

HP DesignJet 700 Bedienungsanleitung

HP DesignJet 350c Series Bedienungsanleitung

HP 7475a Bedienungsanleitung

HP 7470A Bedienungsanleitung

HP Designjet T1200 series Bedienungsanleitung

HP C2858A Bedienungsanleitung

HP Designjet 330 Bedienungsanleitung

HP 7470A Betriebsanleitung

HP C2858A Bedienungsanleitung

HP Designjet 8000s Series Bedienungsanleitung

HP Designjet 510 series Handbuch

HP Designjet 230 Bedienungsanleitung

HP DesignJet Z6610 60 Bedienungsanleitung

HP DesignJet 750c plus Series Bedienungsanleitung

HP Designjet 230 Bedienungsanleitung

HP DesignJet 2500CP Bedienungsanleitung

HP 7470A Bedienungsanleitung

HP 4280A Bedienungsanleitung

HP Designjet 230 Bedienungsanleitung

HP 54 Basic Cutter Bedienungsanleitung

Beliebte Plotter Handbücher anderer Marken

MUTOH

MUTOH Kona 760 Bedienungsanleitung

Vulcan-Hart

Vulcan-Hart FC-500VC Bedienungsanleitung

Roland

Roland TrueVIS VG-640 Betriebsanleitung

Furuno

Furuno RP-180 Bedienungsanleitung

Roland

Roland VersaCamm SP-540V Bedienungsanleitung

MIMAKI

MIMAKI CF2 Series Bedienungsanleitung

Ioline

Ioline Summit Bedienungsanleitung

Summa

Summa S CLASS Bedienungsanleitung

Gerber Technology

Gerber Technology GERBERplotter MP Series Bedienungsanleitung

Furuno

Furuno RP-17 Bedienungsanleitung

SII

SII LP-1010 Bedienungsanleitung

Great Computer

Great Computer JII-61 Bedienungsanleitung

Roland

Roland VersaUv LEF - 12i Bedienungsanleitung

Lectra

Lectra Alys 120 Bedienungsanleitung

MUTOH

MUTOH Ultima SC-850D Bedienungsanleitung

Skycut

Skycut D Series Bedienungsanleitung

Commodore

Commodore 1520 Bedienungsanleitung

Esko

Esko Kongsberg XE Bedienungsanleitung