HP ProLiant ML110 - G2 Server Montageanleitung

HP ProLiant ML110

Generation 2 Server

Installation Sheet

Read instructions completely before beginning

installation procedure.

The information contained herein is subject to change without notice. The only

warranties for HP products and services are set forth in the express warranty

statements accompanying such products and services. Nothing herein should be

construed as constituting an additional warranty. HP shall not be liable for technical

or editorial errors or omissions contained herein.

Intel and Pentium are trademarks or registered trademarks of Intel Corporation or its

subsidiaries in the United States and other countries.

HP ProLiant ML110 Generation 2 Server Installation Sheet

First Edition (January 2005)

Part Number 375600-001

375600- 001

Configuring the Server

1. Connect all peripherals:

—Keyboard

—Mouse

—Monitor

NOTE: Refer to the HP ProLiant ML110 Generation 2 Server Support CD.

Refer to the CD contents for additional information and updates not

provided in this installation sheet.

2. Determine the server BIOS version:

a. Power up the server.

b. Press the Esc key at the HP logo screen, then press the

Pause key to halt screen movement.

c. Note the server BIOS version.

d. Verify the server BIOS version against the latest BIOS

version listed for this server on the HP website:

http://www.hp.com

e. If you do not have the latest BIOS, update the BIOS now.

Refer to the HP ProLiant ML110 Generation 2 Server

Maintenance and Service Guide available on the HP

website: http://www.hp.com

Default Boot Priority

By default, the server searches for boot devices in the following

order:

1. Removable device

2. IDE CD-ROM drive

3. Hard disk drive

4. PXE IBA GE slot 0A08 V1219

Identifying Server Components

Front Panel Components

Table 1: Front Panel Components

Item

Description

CD-ROM drive

2 CD-ROM drive mechanical eject hole

3 CD-ROM drive eject button

4 CD-ROM drive activity indicator

5 Full-height common bays

6 Dual-color status LED indicator

•Green – Power indicator

•Amber – System health indicator

continued

Table 1: Front Panel Components continued

Item

Description

7Power button

8 Drive activity indicator (amber)

9 Front USB 2.0 ports

10 Hard disk drive (HDD) cage

11 Torx screws for the HDD cage

Rear Panel Components

Table 2: Rear Panel Components

Item

Description

1 PS/2 mouse port (green)

2 PS/2 keyboard port (purple)

3 Serial port (teal)

4 Parallel port (burgundy)

5 Monitor port (blue)

6 Rear USB 2.0 ports (black)

7 LAN port (RJ-45)

8 PCI slot covers

PSU fan

10 Power supply cable socket

11 Thumbscrews for the access panel

System fan

13 Retention clips for the PCI slot covers

14 Kensington lock notch

System Board Components

Table 3: System Board Components

Item Code Description

1 CN1 Top: PS/2 mouse port (green)

Bottom: PS/2 keyboard port (purple)

2 CN2 Top: Parallel port (burgundy)

Left: Monitor port (blue)

Right: Serial port (teal)

3 CN5 USB 2.0 ports (black, two)

4 CN6 LAN port (RJ-45)

5 CN7 3-pin CPU fan connector

6 CN10 3-pin system fan connector (rear)

PCI1 to

PCI3

64-bit/100 MHz 3.3V PCI-X bus slots

(three)

8 U13 Intel GD8254IPI GbE LAN controller

9 U17 SMSC LPC47M192 Super I/O chipset

10 U18 VGA frame buffer

11 PCI4 PCI-Express x4 bus slot

12 U22 ATI Rage XL VGA chipset

13 PCI5 32-bit/33 MHz 5V PCI bus slot

14 CN22 9-pin BMC COM connector

15 CN24 9-pin extension serial connector (COM2)

CN20 IPMI connector

U34 BIOS

18 CN21 9-pin front USB connector

19 CN27 Internal USB connector

20 CN17 Internal USB connector (for internal USB

tape use)

21 CN18 34-pin FDD connector

22 CN13 4-pin SCSI LED connector

23 CN16 9-pin front panel connector

SATA0 –

SATA3

7-pin 150-MBps SATA connectors (four)

BZ1 Internal buzzer

26 IDE1 IDE channel UDMA-100

27 SW1 System configuration switch (dip switch)

28 U46 Intel ICH6R chipset (south bridge)

29 JP1 PCI-X bus speed jumper

Jumper setting:

•1-2 – 133 MHz PCI-X bus (default)

•2-3 – 100 MHz PCI-X bus

BT1 Battery

U16 Intel6702 PXH-V chipset (PCI bridge)

32 U9 Intel E7220 chipset (north bridge)

33 U10 Intel LGA775 CPU socket

DIMM1 to

DIMM4

DIMM slots (four)

35 PWRCON2 20-pin ATX system board power

connector

36 PWRCON1 4-pin ATX CPU power connector

Opening the Server

The access panel and the front bezel are both detachable. You need

to remove these system covers before you can remove or replace a

server component.

Removing the Access Panel

Removing the Front Bezel

Installing Mass Storage Devices

The lower drive bay on the front panel accommodates an HDD

cage for installation of up to four additional hard drives. The

hot-plug HDD cage model supports SATA drives only, while the

non-hot-plug model supports both SATA and SCSI drives.

CAUTION: Drives can be damaged by static electricity. Before

handling drives, touch an unpainted metal surface to discharge

static electricity.

WARNING: If you are going to install a non-hot-plug drive,

power down the server first.

Non-hot-plug SCSI Drives

Non-hot-plug SATA Drives

Hot-plug SATA Drives

Installing the PCI Accessory Board

The HP ProLiant ML110 Generation 2 server supports five PCI

bus slots.

•Three 64-bit/100-MHz 3.3V PCI-X bus slots (PCI1 to PCI3)

•One PCI-Express x4 bus slot (PCI4)

•One 32-bit/33-MHz 5VPCI bus slot (PCI5)

Installing Memory

The HP ProLiant ML110 Generation2 server has four DIMM slots

that support up to 4 GB maximum system memory(1 GB in

each of the four DIMM slots).

The following guidelines must be followed when memory

modules are being added or replaced:

•Use only DDR 400 unbuffered ECC and non-ECC DIMMs in

256 MB, 512 MB, or1 GB configuration.

•Up to two DIMMs per channel, single-sided and/or

double-sided. Channel A corresponds to the DIMM1 and

DIMM2 slots, while channel B corresponds to the DIMM3 and

DIMM4 slots.

CAUTION: DIMMs can be damaged by improper handling.

Always use an anti-static wrist strap and grounding mat, and

discharge static electricitybefore touching DIMMs.

The DIMM slots are structuredto ensure proper installation. If you

insert a DIMM but it does not fit easily into the slot, you may have

inserted it incorrectly. Reverse the orientation of the DIMM and

insert it again.

Replacing the Processor

The LGA775 CPU socket in the HP ProLiantML110 Generation 2

server supports an Intel® Pentium®4 processor.

Obtaining Additional

Documentation

For additional documentation, refer to the HPProLiant ML110

Generation 2 Server Support CD. You can also access additional

information and documentation fromthe HP website, www.hp.com

either by connecting directly or through the SupportCD.

Andere Handbücher für ProLiant ML110 - G2 Server

Inhaltsverzeichnis

Andere HP Server Handbücher

HP T5125 - Compaq Thin Client Bedienungs- und Wartungshandbuch

HP LC2000r - NetServer - 128 MB RAM Bedienungsanleitung

HP Integrity rx1620 Bedienungsanleitung

HP ProLiant ML370 G5 Gebrauchsanweisung

HP cc2300 Bedienungsanleitung

HP AlphaServer ES47 Service-Handbuch

HP ProLiant MicroServer Bedienungsanleitung

HP ProLiant ML350p Gen8 Bedienungsanleitung

HP Integrity Superdome 2 16-socket Bedienungsanleitung

HP D7171A - NetServer - LPr Bedienungsanleitung

HP ProLiant DL160 Gen8 Handbuch

HP P4535A - Web Cache Server Appliance Bedienungsanleitung

HP P2000 G3 Bedienungsanleitung

HP T5135 - Compaq Thin Client Installationsanleitung

HP ProLiant ML100 Series Bedienungsanleitung

HP ProLiant DL180 Gen9 Bedienungsanleitung

HP 3000/9x9KS Series Installations- und Betriebshandbuch

HP EH920A - StorageWorks Ultrium 1760 Tape... Bedienungsanleitung

HP 195294-001 - ProLiant - ML370R Bedienungs- und Sicherheitshinweise

HP Integrity rx8620 Bedienungsanleitung

HP Gt7725 - Compaq Thin Client Bedienungsanleitung

HP 4410t - Mobile Thin Client Handbuch

HP 9x9KS Series Kurzanleitung

HP NonStop NS-series Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

Planet

Planet NAS-7410 Bedienungsanleitung

Lenovo

Lenovo ThinkSystem SR635 V3 Bedienungsanleitung

Dell

Dell PowerEdge HS5610 Handbuch