HP MAILbus 400 Bedienungsanleitung

HP MAILbus 400

Message Transfer Agent

Installing on an OpenVMS Alpha

System

October 2006

This card contains the information that you need to install the MAILbus

400 MTA on an OpenVMS Alpha system.

Use this card in conjunction with Part III of HP MAILbus 400 MTA

Planning and Setup.

Revision/Update Information: This is a revised manual.

Operating System and Version: OpenVMS Alpha Version 7.3-2 and above

OpenVMS VAX Version 7.3

Software Version: HP Mailbus 400 Message Transfer Agent

V3.2-12 for OpenVMS

Hewlett-Packard Company

Palo Alto, California

Conﬁdential computer software. Valid license from HP required for possession, use, or copying.

Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software

Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government

under vendor’s standard commercial license.

The information contained herein is subject to change without notice. The only warranties

for HP products and services are set forth in the express warranty statements accompanying

such products and services. Nothing herein should be construed as constituting an additional

warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

OSI is a registered trademark of CA Management, Inc.

Printed in the US

The HP OpenVMS documentation set is available on CD-ROM.

This document was prepared using DECdocument, Version 3.3-1B.

Installation Prerequisites

Before you install the HP MAILbus 400 MTA:

1. Ensure the following software is installed on your system:

OpenVMS Alpha Version 7.3-2, 8.2, or 8.3

HP DECnet-Plus/OSI for OpenVMS Alpha Version 7.3-2, 8.2, or 8.3

including the OSI Applications Kernel (OSAK) component.

HP Enterprise Directory Service for OpenVMS V5.3 or later

2. Ensure you have access to the SYSTEM account.

3. Back up your system disk using the OpenVMS Backup Utility.

4. Register a valid MTA license, MAILBUS-400-MTA or

MAILBUS-400-USER, where you install the MAILbus 400 MTA Server

component. Use the OpenVMS License Management Facility (LMF) to do

this.

5. Make sure that the MAILbus 400 MTA, and any applications that use the

MAILbus 400 MTA, are shut down before installing the new version of the

MAILbus 400 MTA.

See the OpenVMS system management documentation for information about

the OpenVMS Backup Utility and the OpenVMS License Management

Facility.

Information Required

To install the MAILbus 400 MTA, you need to know the name of the device

from which the installation kit will be loaded.

Time Required

The time it takes to install the MAILbus 400 MTA depends on the resources

available on your system. The installation takes approximately 3 minutes on a

DEC 2000 Model 300.

Disk Space Required

The following table shows the approximate amount of disk space required

on the system disk (in blocks) during and after installation for the different

components.

Additional disk space is required after installation for a MAILbus 400 MTA to

be able to handle message trafﬁc.

Component Title Space Required (in blocks)

During After

MAILbus 400 MTA Mgt 3200 1400

MAILbus 400 MTA Base 5700 5000

MAILbus 400 MTA Server, Mgt and Base 22900 20700

Installing the MAILbus 400 MTA

From the SYSTEM account on the node, or cluster, where you want to install a

MAILbus 400 MTA component, complete the following steps:

• Mount the CD–ROM as follows:

MOUNT device-name:volume-label

where

device-name

and

volume-label

are as speciﬁed in the OpenVMS

Alpha Layered Products Compact Disk User’s Guide. The MTA ﬁles are

located on the CD–ROM in the directory named MTA032.

• Install the MTA using the following command:

@SYS$UPDATE:VMSINSTAL MTA032 device-name:[MTA032]

OPTIONS N

The installation procedure starts and prompts you to select the components

you want to install. To specify more than one of the components offered, enter

the number associated with each component, with a comma between numbers.

Installing Components for the MTA

On each single node, or on one node in a cluster, where you want to have an

MTA, select the options to install the following components: MAILbus 400

MTA Mgt, MAILbus 400 MTA Server, and MAILbus 400 MTA Base.

Installing Component for Remote Management

Select the option to install the MAILbus 400 MTA Mgt component on each

single node, or on one node in each other cluster, where you want to remotely

manage MTAs and the MTAs’ routing information in the directory.

Installing Component for Remote Access by XAPI Agents

Where an XAPI Agent (that is, an Agent using the MAILbus 400 Application

Program Interface) is to be installed on a system remote from the MTA, select

the option to install the MAILbus 400 MTA Base component on the single

node, or on one node in the cluster, where the Agent is to be installed.

After the Installation

The set-up tasks required after installation, and the MTA veriﬁcation

procedure are described in Part III of HP MAILbus 400 MTA Planning and

Setup.

Before you set up each MAILbus 400 MTA that you have installed, make sure

that the Base component of the HP Enterprise Directory Service is installed on

each node or cluster where you intend to operate a MAILbus 400 MTA.

Refer to the HP Enterprise Directory Service documentation for details of how

to install the Base component of the HP Enterprise Directory Service.

Release Notes and Further Information

After installation, the release notes are kept in

SYS$COMMON:[SYSHLP]MAILBUS400_MTA.RELEASE_NOTES.

HP MAILbus 400 MTA Tuning and Problem Solving contains a list of the ﬁles

that should be present on your system after installation, and information about

how to contact HP if the installation fails.

Inhaltsverzeichnis

Andere HP Software Handbücher

HP B6191-90015a Bedienungsanleitung

HP StorageWorks 8/8 - SAN Switch Bedienungsanleitung

HP Xw460c - ProLiant - Blade Workstation Bedienungsanleitung

HP C7791C - DesignJet 130 Color Inkjet Printer Konfigurationshandbuch

HP Reliable Transaction Router Bedienungsanleitung

HP HPE XP P9500 Bedienungsanleitung

HP HSG80 - StorageWorks RAID Array Controller Bedienungsanleitung

HP HPE XP P9500 Bedienungsanleitung

HP StorageWorks 2/32 - SAN Switch Bedienungsanleitung

HP Pavilion w1000 - Desktop PC Betriebsanleitung

HP StorageWorks MSA 2/8 - SAN Switch Bedienungsanleitung

HP Data Protector A.06.11 Bedienungsanleitung

HP Surestore Disk Array 12h - And FC60 Referenzhandbuch

HP P Class 450/500/550/600/650/700/750 Bedienungsanleitung

HP ProCurve 3500yl Series Anleitung zur Verwendung

HP nld Bedienungsanleitung

HP StorageWorks 2000fc Bedienungsanleitung

HP AE370A - Brocade 4Gb SAN Switch 4/12 Service-Handbuch

HP Neoview SQL Bedienungsanleitung

HP Tc4100 - Server - 256 MB RAM Kurzanleitung

HP dc5700 - Microtower PC Bedienungsanleitung

HP D5970A - NetServer - LCII Bedienungsanleitung

HP Quality Center Synchronizer 1.2 Bedienungsanleitung

HP StorageWorks All-in-One SB600c - Storage... Bedienungsanleitung

Beliebte Software Handbücher anderer Marken

COMPRO

COMPRO COMPROFM Bedienungsanleitung

Muratec

Muratec OFFICEBRIDGE ONLINE Bedienungsanleitung

Oracle

Oracle Contact Center Anywhere 8.1 Bedienungsanleitung

Adobe

Adobe 65007312 - Photoshop Lightroom Handbuch

Avaya

Avaya NULL One-X for RIM Blackberry Bedienungsanleitung

PS Audio

PS Audio PowerPlay Betriebsanleitung

Brady

Brady LOCKOUT PRO 3.0 Service-Handbuch

Avaya

Avaya Interaction Center Bedienungsanleitung

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Handbuch

Novell

Novell GROUPWISE 8 - INTERNET AGENT Bedienungsanleitung

Oracle

Oracle Application 9i Bedienungsanleitung

Acer

Acer RDM Bedienungsanleitung

Canon

Canon Vixia HF21 Bedienungsanleitung

Canon

Canon ZR950 Bedienungsanleitung

Samsung

Samsung Auto Backup Bedienungsanleitung

Polycom

Polycom Vortex EF2201 Montage- und Bedienungsanleitung

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Bedienungsanleitung

Novell

Novell SP2 - S Bedienungsanleitung