HP 705 Kurzanleitung

Andere Handbücher für 705

6

Dieses Handbuch passt für folgende Modelle

11

Andere HP Lagerung Handbücher

HP

HP 3PAR StoreServ 7200 2-node Montageanleitung

HP

HP StorageWorks 4000/6000/8000 - Enterprise Virtual... Bedienungsanleitung

HP

HP AH164A - StorageWorks 1/8 G2 Tape Autoloader Ultrium... Montage- und Bedienungsanleitung

HP

HP LTO-6 Ultrium FH SAS Bedienungsanleitung

HP

HP StorageWorks 1/8 G2 Bedienungsanleitung

HP

HP C7745NB - SureStore DLT Tape Autoloader 1/9 Bedienungsanleitung

HP

HP StorageWorks MSL6000 series Gebrauchsanweisung

HP

HP BL536A Bedienungsanleitung

HP

HP StorageWorks MSL2024 Referenzhandbuch

HP

HP StorageWorks 2012i Bedienungsanleitung

HP

HP StorageWorks SB40c Handbuch

HP

HP Storevirtual 4000 Bedienungsanleitung

HP

HP EVA P6000 Leitfaden

HP

HP StoreEasy 1X60 Series Bedienungsanleitung

HP

HP AU181AA Bedienungsanleitung

HP

HP AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard... Bedienungsanleitung

HP

HP SCSI Ultra320 Installationsanleitung

HP

HP StorageWorks SB920c Tape Blade Montageanleitung

HP

HP StoreEver MSL2024 Gebrauchsanweisung

HP

HP Surestore Tape Library Model 10/588 Montageanleitung

HP

HP P9000 Bedienungsanleitung

HP

HP Surestore 1200ex - Optical Jukebox Bedienungsanleitung

HP

HP StorageWorks XP1024 Bedienungsanleitung

HP

HP Surestore Tape Library Model 2/15 Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung

Dell

Dell PowerVault MD3600f Series Bedienungsanleitung

CFI

CFI TERA STOR SATA RAID IV Bedienungsanleitung

This device cannot be installed as a standalone device at

HP–UX 9.03. To install 2–GB drives on HP–UX 9.03, you must

use a netdist install server. You must install patch PHSS_5776 on

the server to recognize 2-GB drives.

For systems operating with HP-UX release 9.05, you must load

patch PHCO_5881 for disktab and sam functionality, and patch

PHSS_5776 for network installation functionality.

The software patches may be obtained from HP Customer Service.

To install patch PHCO_5881 to HP–UX, perform the following

steps:

1. Begin the HP-UX software installation process. If the system

has a one of the drives installed, the following message ap-

pears:

“Note: the destination disk type “

disk–drive

”

was not found in the disk table /etc/disktab.

(Press any key to continue.)”

2. Press any key. The screen displays the following message:

“If model number: “

disk–drive

”, is incorrect,

and a correct one (one that has an entry in

the /etc/disktab) is known, please enter it

now otherwise press return.”

3. Type: DEC_DSP3210S Return

The DEC_DSP3210S drive is functionally equivalent to the

new drives. By using this entry, you can complete the software

installation process.

4. Let the software installation process complete.

5. Install the appropriate patch using /etc/update and reboot the

system.

2–GB Disk Drive

User Notes

Refer to your workstation owner’s guide or your disk drive installation

guide for detailed information about installing your disk drive. During

the installation procedure, you may have to change the SCSI ID of your

disk drive. Refer to the appropriate illustration to set the SCSI ID

jumpers to the desired SCSI ID.

NOTICE: We recommend that you use SCSI ID 6 for your

workstation’s first hard disk drive, and SCSI ID

5 for the second hard disk drive.

  

The 2–GB disk drive is fully operational with HP-UX Release 9.03 and

later on Series 700 systems (releases 9.03, and 9.05 require patches to

the operating system). Please see the patch instructions on the last page

of this document.

Also, the following patches are necessary to run diagnostics:

HP-UX 9.03 through 9.07 – PHSS_6798

HP-UX 10.01 – PHSS_6794

HP-UX 10.10 – PHSS_7071

The HP part numbers for these drives are A1658–60009 (spare) and

A1658–69009 (exchange).

Part Number A1658–90691

Edition E0596

Printed in U.S.A.



CAUTION

NOT

Do

plugs for J2 on J6.

Y

ou will damage the

internal contacts

use the jumper

A2

A1

A0

0

1

2

3

4

5

6

SCSI

J6

J2

M

S

B

L

S

B

ID

T

erm Power

from Drive

Seagate ST32151N Disk Drive Jumpers