HP Invent EH861 Series Montageanleitung

EL-MF877-00 Page 1

Template Revision A

Product End-of-Life Disassembly Instructions

Product Category: Data Storage Devices

Marketing Name / Model

[List multiple models if applicable.]

Ultrium 4, LTO1840 full height external / EH861X, PD016X, EH854X & PD091X

Ultrium 3, LTO960 full height external / Q1539X & PD071

Ultrium 2, LTO460 full height external / Q1520B

Where X = any alphanumeric combination

Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions

for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU

directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).

1.0 Items Requiring Selective Treatment

1.1 Items listed below are classified as requiring selective treatment.

1.2 Enter the quantity of items contained within the product whichrequire selective treatment in the right column, as

applicable.

Item Description Notes

Quantity

of items

included

in product

Printed Circuit Boards (PCB) or Printed Circuit

Assemblies (PCA) With a surface greater than 10 sq cm 7

Batteries All types including standard alkaline and lithium coin

or button style batteries 0

Mercury-containing components For example, mercury in lamps, display backlights,

scanner lamps, switches, batteries 0

Liquid Crystal Displays (LCD) with a surface greater

than 100 sq cm Includes background illuminated displays with gas

discharge lamps 0

Cathode Ray Tubes (CRT) 0

Capacitors / condensers (Containing PCB/PCT) 0

Electrolytic Capacitors / Condensers measuring

greater than 2.5 cm in diameter or height All on PSU 5

External electrical cables and cords 0

Gas Discharge Lamps 0

Plastics containing Brominated Flame Retardants SCSI ribbon cable. SCSI enclosure only 1

Components and parts containing toner and ink,

including liquids, semi-liquids (gel/paste) and toner Include the cartridges, print heads, tubes, vent

chambers, and service stations. 0

Components and waste containing asbestos 0

Components, parts and materials containing

refractory ceramic fibers 0

Components, parts and materials containing

radioactive substances 0

EL-MF877-00 Page 2

Template Revision A

2.0 Tools Required

List the type and size of the tools that would typically be used to disassemble the product to a point where components

and materials requiring selective treatment can be removed.

Tool Description Tool Size (if

applicable)

Torx screwdriver T5, T8 & T10

Crosshead screwdriver Large

Small pliers N/A

3.0 Product Disassembly Process

3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:

3.1.1 Remove the lid and front bezel. 5 x T-10 screws; 4 x underneath and 1 from the rear and clip off the front bezel.

3.1.2 Remove the mechanism from the enclosure chassis. 2 x T-10 screws at the rear of the mechanism; 4 x T-10

screws at the front of the mechanism –1 x either side of the front panel and 2 x underneath the front panel.

Disconnect the SCSI / SAS, SCSI ID and power cable and slide the mechanism out the front of the chassis.

3.1.3 Remove the SCSI I/O PCA at the rear of the enclosure (SCSI enclosure only). Use a pair of small pliers to

unscrew the 4 x securing nuts at the rear of the enclosure –see image 1 below. The I/O SCSI PCA is > 10 square

cm’s and requires selective treatment. See images 1 & 2 below.

3.1.4 Disconnect the SCSI ribbon cable from the I/O PCA. Ribbon cable containsbrominated flame retardant and

requires selective treatment. See image 2 below.

3.1.5 Remove the SAS cable assembly (SAS enclosure only). Remove 2 x T-10 screws from the rear of the enclosure.

Remove 4 xsize ‘1’ crosshead screws to remove the clamp from the SAS PCA. The PCA is > 10 square cm’s –

see image 3.

3.1.6 Remove the Power Supply Unit (PSU) from the enclosure chassis. Remove 2 x T-10 screws fromthe rear –above

/ below AC inlet filter, and 1 x T-10 screw from front side of chassis. Remove 2 xcrosshead screws -one from the

front, one from the rear and slide the lid back towards the rear of the PSU –see image 4.

3.1.7 Remove the PSU and the on/ off PCA from their enclosure. PSU PCA is secured by 5 crosshead screws. 1 x

crosshead securing the on / off PCA. The PSU PCA is > 10 square cm’s. It also contains 5 x electrolytic

capacitors. The on / off PCA is > 10 square cm’s. See image 5.

3.1.8 Mechanism disassembly: remove the two wing brackets; remove the front panel (clip fit –two clips top, two

bottom), and remove the lid and the base. You will need to cut the 4 xtamper-proof tapes, top and bottom to clip off

the lid and the base.

3.1.9 Remove the main PCA. Disconnect all FFC / FPC connectors and 1 x cable connector. The main PCA is > 10

square cm’s. See image 6. When the PCA is removed, remove the PCA shield. Located underneath the main

PCAand secured by 2 x T-10 screws –see image 6.

3.1.10 Remove the CMWP PCA. Slide the cartridge assembly 2 cm back into the mechanism. Remove 5 x T-5 screws

securing the PCA and remove from mech. CMWP PCA is > 10 square cm’s –see image 7.

3.1.11 Remove the 2 x reel motor PCAs. Remove the tape reel. 3 x T-10 screws and cut the tape. Once removed,

remove 3 x T-8 screws securing the front reel motor PCA and 3 xT-8 screws securing the rear reel motor PCA.

Both reel motor PCAs are > 10 square cm’s.See image 8.

3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items

contained inthe product that require selective treatment (with descriptions and arrows identifying locations).

EL-MF877-00 Page 3

Template Revision A

Remove 4 x securing nuts to remove the I/O SCSI PCA

4) Removing the PSU from chassis.

5) PSU & on / off PCB removal

PCA > 10 square

cm’s

2 x T

10 screws from rear of

chassis.

4 x size ‘1’ crosshead screws from

the underside of the PCA clamp.

2 x size T

screws, above / below

AC inlet. 1 x T-10 screw front, left

side of chassis.

2 x crosshead screws, to remove the

lid from the PSU

5 x electrolytic capacitors > 2.5 cm in

height. PCA > 10 square cm’s.

PCA > 10 square cm’s

I/O PCA > 10 square cm.

SCSI ribbon cable contains

brominated flame retardant

EL-MF877-00 Page 4

Template Revision A

6) Main PCA and FFC connectors.

Above: PCA shield

7) CMWP PCA.

5 x T-5 screws

8) Reel motor PCAs.

PCA > 10 square cm’

CMWP PCA > 10 square cm

Remove the

tape

reel

Both reel motor PCAs > 10 square

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere HP Lagerung Handbücher

HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM Bedienungsanleitung

HP DW017B - StorageWorks Ultrium 448 Tape Drive Bedienungsanleitung

HP Surestore Disk Array 12h - And FC60 Bedienungsanleitung

HP Storevirtual 4000 Bedienungsanleitung

HP 624192-B21 Gebrauchsanweisung

HP LTO-6 Ultrium FH SAS Bedienungsanleitung

HP Compaq Pro 6305 Bedienungsanleitung

HP StorageWorks P4000 Series Bedienungsanleitung

HP StorageWorks MSL2024 Gebrauchsanweisung

HP 3PAR StoreServ 7200 2-node Bedienungsanleitung

HP VS80 - StorageWorks DLT VS 80 Tape Drive Bedienungsanleitung

HP 9153A Bedienungsanleitung

HP D2D Bedienerhandbuch

HP D2D100 Bedienungsanleitung

HP SureStore 4115w Bedienungsanleitung

HP StorageWorks 4000/6000/8000 - Enterprise Virtual... Bedienungsanleitung

HP M8502 Bedienungsanleitung

HP C2488A Produkthandbuch

HP StorageWorks Ultrium 1760 Bedienungsanleitung

HP Surestore 5200ex - Optical Disk Drives Bedienungsanleitung

HP NetStorage 6000 Bedienungsanleitung

HP MSA 2040 Programmierhandbuch

HP POD 40c G2 Handbuch

HP StorageWorks MSL2024 Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung

Dell

Dell PowerVault MD3600f Series Bedienungsanleitung

CFI

CFI TERA STOR SATA RAID IV Bedienungsanleitung