HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM Bedienungsanleitung

Andere Handbücher für STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM

8

Andere HP Lagerung Handbücher

HP

HP StorageWorks 8B - FC Entry Switch Bedienungsanleitung

HP

HP StoreEasy 1X60 Series Bedienungsanleitung

HP

HP c350b Bedienungsanleitung

HP

HP SimpleSave Bedienungsanleitung

HP

HP HPE Alletra 6010 Montageanleitung

HP

HP MSA 2040 Bedienungsanleitung

HP

HP C2233 Bedienungsanleitung

HP

HP StorageWorks 2000fc Bedienungsanleitung

HP

HP StorageWorks 2300 - Disk System Kurzanleitung

HP

HP StorageWorks 8000 - NAS Bedienungsanleitung

HP

HP FIPS 140-2 Handbuch

HP

HP Storevirtual 4000 Bedienungsanleitung

HP

HP 7942 Bedienungsanleitung

HP

HP StorageWorks 400r All-in-One Gebrauchsanweisung

HP

HP P9000 Bedienungsanleitung

HP

HP A5272A - SureStore E Disk System SC10 Storage... Bedienungsanleitung

HP

HP 345524-B21 Bedienungsanleitung

HP

HP P9000 Bedienungsanleitung

HP

HP F2B56AA Bedienungsanleitung

HP

HP StorageWorks D2700 Bedienungsanleitung

HP

HP STORAGEWORKS XP24000 Bedienungsanleitung

HP

HP StorageWorks 2300 - Disk System Bedienungsanleitung

HP

HP AU183AA Bedienungsanleitung

HP

HP S700 Pro 2.5 Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung

Dell

Dell PowerVault MD3600f Series Bedienungsanleitung

CFI

CFI TERA STOR SATA RAID IV Bedienungsanleitung

<<bar code goes here in

text box, if applicable>>

201414- 003

hp StorageWorks

SDLT external tape drive

SDLT External Tape Drive Installation Instructions

Third Edition (October 2002)

Part Number: 201414-003

© Hewlett-Packard Company, 2002.

Hewlett-Packard Company makes no warranty of any kind with

regard to this material, including, but not limited to, the implied

warranties of merchantability and fitness for a particular purpose.

Hewlett-Packard shall not be liable for errors contained herein or for

incidental or consequential damages in connection with the

furnishing, performance, or use of this material.

This document contains proprietary information, which is protected

by copyright. No part of this document may be photocopied,

reproduced, or translated into another language without the prior

written consent of Hewlett-Packard. The information contained in this

document is subject to change without notice.

All other product names mentioned herein may be trademarks of their

respective companies.

Hewlett-Packard Company shall not be liable for technical or editorial

errors or omissions contained herein. The information is provided “as

is” without warranty of any kind and is subject to change without

notice. The warranties for Hewlett-Packard Company products are set

forth in the express limited warranty statements accompanying such

products. Nothing herein should be construed as constituting an

additional warranty.

installation

instructions

The HP SDLT tape drive requires a Wide-Ultra SCSI controller

or higher.

Step 1, Set the SCSI ID (Figure A)

Each SCSI device on the same SCSI bus must have a unique

SCSI ID. The default for HP tape drives is 6. If needed, change

the SCSI ID by pressing the button above or below the number

display on the back of the tape drive enclosure.

Note: SCSI ID 7 is reserved for the SCSI controller, two SCSI

controllers have IDs 6 and 7.

Step 2, Connect the Cables (Figure B)

1. Turn off the computer and any peripherals.

2. Attach the SCSI signal cable 1to the SCSI connector 2

located on the rear panel of the SDLT drive and then to the

external SCSI-2 port on the computer. Use the appropriate

SCSI cable for your computer SCSI connection. Two 6-ft

(1.8-m) cables are provided.

3. Attach the terminator (not shown) to the SCSI connector 3.

6

A

2

3

1

4

B

Page 2

4. Plug the tape drive AC power cord 4into the drive and

then plug the other end into a grounded AC outlet.

WARNING: To reduce the risk of electric shock or damage

to your equipment, do not disable the power cord

grounding feature. This equipment is designed for

connection to a grounded (earthed) power outlet. The

grounding plug is an important safety feature.

5. Turn on all peripheral devices and the computer.

Daisy Chaining - Optional Configuration

(Figure C)

Two SDLT tape drives can be connected to the same SCSI

channel at the same time. Use a 6-ft (1.8-m) cable to attach the

initial unit, then use a 3-ft (0.9-m) cable to daisy chain the

additional tape drive.

Note: Do not connect more than two tape drives per SCSI

controller. If using a low voltage differential (LVD) controller, more

than 2 drives can be connected per controller. Refer to your LVD

manual for cable configurations.

1. If the first drive unit has a terminator on the SCSI connector

1, remove it.

2. Connect the tape drives together by placing a SCSI cable

between the SCSI connector 2of the first drive to the SCSI

connector 3of the second drive.

3. Place the terminator (not shown) on the SCSI connector 4

of the second drive.

4. Turn on all peripheral devices and the computer.

Installation is complete. For more information about your tape

drive, refer to the HP StorageWorks SDLT Drive Reference

Guide that came with your tape drive.

1

2

3

4

C