HP AdvanceStack 100VG Bedienungsanleitung

HPAdvanceStackSwitch

100VGModule

Installation Guide

Reproduction, adaptation, or translation without

prior written permission is prohibited, except as

allowed under the copyright laws.

The information contained in this document is

subject to change without notice.

HEWLETT-PACKARD COMPANY MAKES NO

WARRANTY OF ANY KIND WITH REGARD

TO THIS MATERIAL, INCLUDING, BUT NOT

LIMITED TO, THE IMPLIED WARRANTIES

OF MERCHANTABILITY AND FITNESS FOR

A PARTICULAR PURPOSE. Hewlett-Packard

shall not be liable for errors contained herein

or for incidental or consequential damages in

connection with the furnishing, performance,

or use of this material.

Hewlett-Packard assumes no responsibility for

the use or reliability of its software on equipment

that is not furnished by Hewlett-Packard.

See the warranty card included with the product.

A copy of the specific warranty terms applicable

to your Hewlett-Packard product and

replacement parts can be obtained from your

HP sales and service office or HP-authorized

reseller.

Publication Number

5966-5117

Edition 1

September 1996

Applicable Product

HP J3103A

Hewlett-Packard Company

8000 Foothills Boulevard, m/s 5551

Roseville, California 95747-5551

http: //www.hp.com/go/network_city

HP Customer Support Services

How to get the latest software/agent firmware

You can download a compressed file ( j3100a.exe) containing the latest

version of the HP Switch 2000 software, proprietary MIB, and a software

download utility file (update.exe) from the HP BBS, HP FTP Library Service,

CompuServe, and the World Wide Web. After you download the file, extract

the file by typing

filename

/x and pressing [Enter].For example: j3100a.exe /x

[Enter].

HP BBS

Set your modem to N-8-1, set speed up to 14400 bps, and with your

telecommunication program (e.g., Windows Terminal) dial (208) 344-1691 to

get the latest software for your HP networking product.

HP FTP Library Service

1) FTP to Internet IP Address ftp ftp.hp.com

2) Log in as anonymous and press [Enter] at the password prompt.

3) Enter bin to set the transfer type to binary.

4) Enter cd /pub/networking/software

5) Enter get

filename

to transfer the file to your computer, then quit.

CompuServe

1) Login to CompuServe.

2) Go to the “hp” service.

3) Select “HP Systems, Disks, Tapes, etc”.

4) Select “Networking Products” library.

5) Download the compressed file named J3100.exe, and then quit.

World Wide Web

http://www.hp.com/go/network_city

Select the Support section, then ‘‘Software Downloads and Patches’’.

Download the file you need and extract it by typing:

filename

Do you have questions about designing your expanding network? From this

web site, you can also download the Designing HP AdvanceStack

Workgroup Networks Guide which addresses capacity planning, or dial

1-800-752-0900 to receive a copy through the mail.

(over for more services)

Perforate

Obtain the latest console code (j3100a.exe) from:

HP FTP Library: ftp ftp.hp.com

World Wide Web: http://www.hp.com/go/network_city

HP BBS: (208) 344-1691

(over)

HP FIRST Fax Retrieval Service

HP FIRST is an automated fax retrieval service that is available 24 hours a

day, seven days a week. HP FIRST provides information on the following

topics:

Product information

Troubleshooting instructions

Technical reviews and articles

Configuration information

To access HP FIRST, dial one of the following phone numbers:

Location Phone Number

U.S. and Canada Only Dial 1 (800) 333-1917 with

your fax machine or

touch-tone phone and

press 1.

Outside the U.S. and

Canada Dial 1 (208) 344-4809 from

your fax machine and

press 9.

To receive a list of currently available documents, enter document number

19941. The information you requested will be sent to you by return fax.

Additional HP Support Services

In addition to the above services, you can purchase various HP telephone

support services which provide you expert HP technical assistance:

Network Phone-In Support provides you support at an hourly rate. In the

USA, call 1-800-790-5544. In other countries, please contact your local HP

Response Center to see if this service is available in your country.

HP SupportPack Comprehensive Network Support provides complete

problem resolution for medium to large interconnected local and wide

area networks. Contact your HP Authorized Reseller or the nearest HP

Sales and Support Office for more information.

CompuServe: Go to the hp service

Select HP Systems, etc

Select Networking Products

Download the file named J3100.exe

Network Phone-In

Support (Hourly): 1-800-790-5544

HP AdvanceStack Switch

100VG Module

For the HP AdvanceStack Switch 2000

At A Glance

The HP AdvanceStack 2-Port 100VG Module (HP J3103A) is an optional

component that you can add to an HP AdvanceStack Switch 2000 to provide

up to two 100VG ports. Each port can use one of several 100VG transceivers

designed for various 100VG media.

For information on transceiver types and availability, contact your

Hewlett-Packard networking representative.

Features: The HP AdvanceStack 2-Port 100VG Module can enhance

your Switch 2000 in the following ways:

You can use the module to connect different 100VG media types to

your Switch 2000.

You can add, change, or remove either the module itself or a

transceiver in the module without shutting down the entire switch.

You can install up to six 100VG modules in your Switch 2000,

enabling you to ‘‘fully load’’ the switch with up to 12 100VG ports for

high-speed networking.

switch

connector

extractor

handle

port 1

transceiver

slot

port 2

transceiver

slot

extractor

handle

Figure 1. The HP AdvanceStack Switch 100VG Module

iii

Contents

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Installing a Module in an Unused Slot . . . . . . . . . . . . . . . . 2

Customizing the Port Configuration . . . . . . . . . . . . . . . . . 7

Rebooting the Switch . . . . . . . . . . . . . . . . . . . . . . . . . 8

Removing or Replacing a Module . . . . . . . . . . . . . . . . . . 9

Adding, Replacing, or Removing a Transceiver . . . . . . . . . . . 11

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Customer Support Services . . . . . . . . . . . . . . . . . . . . . . . 13

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Regulatory Statements . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Overview

Note Before you install the HP AdvanceStack Switch 100VG Module into the

Switch 2000, you should install an optional HP 100VG Transceiver

module in one or both of the 100VG transceiver slots in the module.

(Refer to the instructions you received with the transceiver.)

You can install a 100VG Module into the Switch 2000 in any one of the six

module slots, as follows:

1. Install the 100VG Module in a Switch 2000 slot (page 2).

2. Customize the configuration for the module ports (unless the default

port configuration is satisfactory for your network application - see

page 7).

3. Reboot the switch (page 8).

Other, optional procedures include:

Hot-Swapping one module for another; that is, replacing one module

with another without turning off power to the switch (page 9)

Using the hot-swap process to install a transceiver into a module

that has already been installed in the switch (page 11)

Caution Static electricity can severely damage the sensitive electronic

components on the HP AdvanceStack Switch 100VG Module. When

handling and installing the module in your switch, follow these

procedures to avoid damage from static electricity:

Handle the module by its edges and avoid touching the components

and the circuitry on the board.

Equalize any static charge difference between your body and the

switch by wearing a wrist strap and attaching it to the switch’s metal

body, or by frequently touching the switch’s metal body while you

are installing the module.

For proper cooling and reduction of electromagnetic emissions, ensure that

slot covers (provided with your Switch 2000) are installed on any unused

ports or transceiver slots.

Installing a Module in an Unused Slot

This procedure assumes that you have already installed the HP 100VG

Transceiver(s) you plan to use in the 100VG module. (The module operates

properly with either one or two HP 100VG transceivers installed.)

1. Slide out the blank LED label strip from the label slot corresponding

to the physical slot in which you will install the module. The LED

label strips have a small loop on the left end. Use your fingernail or a

small implement to catch the loop and slide the label to the left and

out of the label slot. Then insert the LED label strip you received

with the 100VG Module. For example, if you are going to install the

module in slot ‘‘A’’, you would replace the blank LED label strip in

label slot ‘‘A’’ with the new LED label strip for the 100VG Module.

(Refer to Figure 1, on the next page.)

Save the blank LED label strip in case you ever want to remove the

module and its LED label strip.

2. Using a Torx T-10 or slotted screw driver, unscrew the screws in the

cover plate over the slot you want to use, and remove the cover.

Store the cover plate with its screws for possible future use. For

example, to install a module in slot A, see Figure 1.

Inhaltsverzeichnis

Andere HP Schalten Handbücher

HP 316095-B21 - StorageWorks Edge Switch 2/24 Technisches Handbuch

HP 3600 v2 Series Installationshandbuch

HP ProCurve Switch 2650 Bedienungsanleitung

HP J9575A Bedienungsanleitung

HP Procurve Series 4100GL Bedienungsanleitung

HP FlexNetwork NJ5000 Bedienungsanleitung

HP 316095-B21 - StorageWorks Edge Switch 2/24 Bedienungsanleitung

HP 6125G Bedienungsanleitung

HP AF620A Gebrauchsanweisung

HP 316095-B21 - StorageWorks Edge Switch 2/24 Bedienungsanleitung

HP A7503 Bedienungsanleitung

HP 316095-B21 - StorageWorks Edge Switch 2/24 Bedienungsanleitung

HP ProCurve 4202vl-48G Bedienungsanleitung

HP ProCurve 1600M Bedienungsanleitung

HP KVM Server Console Switch G2 Bedienungsanleitung

HP 316095-B21 - StorageWorks Edge Switch 2/24 Bedienungsanleitung

HP SN3000B Programmierhandbuch

HP J8772B Montageanleitung

HP M-Series Bedienungsanleitung

HP AA-RW20A-TE Bedienungsanleitung

HP ProCurve 5400zl Series Leitfaden

HP Switch Gebrauchsanweisung

HP ProCurve 1400-8G Bedienungsanleitung

HP StorageWorks 2/140 - Director Switch Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung