HP Rp5000 - Point of Sale System Bedienungsanleitung

Computer Setup (F10) Utility

Guide

HP Point of Sale System rp5000

Document Part Number: 337857-001

August 2003

This guide provides instructions on how to use Computer Setup. This

tool is used to reconfigure and modify computer default settings when

new hardware is installed and for maintenance purposes.

HP, Hewlett Packard, and the Hewlett-Packard logo are trademarks of

Hewlett-Packard Company in the U.S. and other countries.

Compaq and the Compaq logo are trademarks of Hewlett-Packard Development

Company, L.P. in the U.S. and other countries.

Microsoft, MS-DOS, and Windows are trademarks of Microsoft Corporation in

the U.S. and other countries.

All other product names mentioned herein may be trademarks of their respective

companies.

Hewlett-Packard Company shall not be liable for technical or editorial errors or

omissions contained herein or for incidental or consequential damages in

connection with the furnishing, performance, or use of this material. The

information in this document is provided “as is” without warranty of any kind,

including, but not limited to, the implied warranties of merchantability and

fitness for a particular purpose, and is subject to change without notice. The

warranties for HP products are set forth in the express limited warranty

statements accompanying such products. Nothing herein should be construed as

constituting an additional warranty.

This document contains proprietary information that is protected by copyright.

No part of this document may be photocopied, reproduced, or translated to

another language without the prior written consent of Hewlett-Packard

Company.

ÅWARNING: Text set off in this manner indicates that failure to follow

directions could result in bodily harm or loss of life.

ÄCAUTION: Text set off in this manner indicates that failure to follow

directions could result in damage to equipment or loss of information.

Computer Setup (F10) Utility Guide

HP Point of Sale System rp5000

First Edition (August 2003)

Document Part Number: 337857-001

Computer Setup (F10) Utility Guide www.hp.com iii

Contents

Computer Setup (F10) Utility Guide

Computer Setup (F10) Utilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Using Computer Setup Utilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

System Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

About . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Set Time and Date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Save to Diskette . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Restore from Diskette. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Set Defaults and Exit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Ignore Changes and Exit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Save Changes and Exit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Device Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Storage Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Controller Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Boot Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Setup Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Power-On Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Password Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Device Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Save Master Boot Record. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Restore Master Boot Record . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Network Service Boot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

System IDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Master Boot Record Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

iv www.hp.com Computer Setup (F10) Utility Guide

Contents

Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Energy Saver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Timeouts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Energy Saver Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Advanced . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Power-On Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Onboard Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

PCI Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Bus Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Device Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Computer Setup (F10) Utility Guide www.hp.com 1

Computer Setup (F10) Utility Guide

Computer Setup (F10) Utilities

Use the Computer Setup (F10) Utility to do the following:

■Change factory default settings.

■Set the system date and time.

■Set, view, change, or verify the system configuration, including

settings for processor, graphics, memory, audio, storage,

communications, and input devices.

■Modify the boot order of bootable devices such as hard drives,

diskette drives, optical drives, or HP Drive Keys.

■Configure the boot priority of IDE hard drive controllers.

■Enable Quick Boot, which is faster than Full Boot but does not

run all of the diagnostic tests run during a Full Boot. You can set

your system to:

❏always Quick Boot (default);

❏periodically Full Boot (from every 1 to 30 days); or

❏always Full Boot.

■Enable or disable Network Server Mode, which allows the

computer to boot the operating system when the power-on

password is enabled, with or without a keyboard or mouse

attached. When attached to the system, the keyboard and mouse

remain locked until the power-on password is entered.

■Select Post Messages Enabled or Disabled to change the display

status of Power-On Self-Test (POST) messages. Post Messages

Disabled suppresses most POST messages, such as memory

count, product name, and other non-error text messages. If a

2 www.hp.com Computer Setup (F10) Utility Guide

Computer Setup (F10) Utility Guide

POST error occurs, the error is displayed regardless of the mode

selected. To manually switch to Post Messages Enabled during

POST, press any key (except F1 through F12).

■Establish an Ownership Tag, the text of which is displayed each

time the system is turned on or restarted.

■Enter the Asset Tag or property identification number assigned by

your company to this computer.

■Enable the power-on password prompt during system restarts

(warm boots) as well as during power-on.

■Establish a setup password that controls access to the Computer

Setup (F10) Utility and the settings described in this section.

■To secure integrated I/O functionality, including the serial, USB,

or parallel ports, audio, or embedded NIC, so that they cannot be

used until they are unsecured.

■Enable or disable Master Boot Record (MBR) Security.

■Enable or disable removable media boot ability.

■Enable or disable removable media write ability (when supported

by hardware).

■Solve system configuration errors detected but not automatically

fixed during the Power-On Self-Test (POST).

■Replicate your system setup by saving system configuration

information on diskette and restoring it on one or more

computers.

■Configure various energy-saving features including energy saver

mode, system and hard drive timeouts, power button mode, and

power LED behavior.

Computer Setup (F10) Utility Guide www.hp.com 3

Computer Setup (F10) Utility Guide

Using Computer Setup Utilities

To access the Computer Setup Utilities menu, complete the following

steps:

1. Turn on or restart the computer. If you are in Windows, click

Start > Shut Down > Restart the Computer.

2. Press the F10 key as soon as the computer begins to boot.

✎If you do not press the F10 key at the appropriate time and the

Windows operating system begins, you must restart the computer

again and press F10 again to access the utility.

3. Select your language from the list and press the Enter key.

4. A choice of five headings appears in the Computer Setup Utilities

menu: File, Storage, Security, Power, and Advanced.

5. Use the arrow (left and right) keys to select the appropriate

heading. Use the arrow (up and down) keys to select the option

you want, then press the Enter key. To return to the Computer

Setup Utilities menu, press the Esc key.

6. To apply and save changes, select File > Save Changes and Exit.

❏If you have made changes that you do not want applied, select

Ignore Changes and Exit.

❏To reset to factory settings, select Set Defaults and Exit.

This option will restore the original factory system defaults.

ÄCAUTION: Do NOT turn the computer power OFF while the ROM is

saving your F10 Computer Setup changes because the CMOS could

become corrupted. It is only safe to turn off power to the computer after

you exit the F10 Setup screen.

4 www.hp.com Computer Setup (F10) Utility Guide

Computer Setup (F10) Utility Guide

Computer Setup

Heading Option Description

File System Information Lists:

•Productname

• Processor type/speed/stepping

• Cache size (L1/L2)

• Installed memory size

• System ROM (includes family name

and version)

• Chassis serial number

• Asset tracking number

• Integrated MAC address for embedded,

enabled NIC

About Displays copyright notice.

Set Time and Date Allows you to set system time and date.

Save to Diskette Saves system configuration, including CMOS,

to a formatted 1.44-MB diskette in file

CPQsetup.txt. Save/Restore for the HP Drive

Key is supported.

Restore from Diskette Restores system configuration from a diskette.

Save/Restore for the HP Drive Key is

supported.

Set Defaults and Exit Restores factory default settings, which

includes clearing any established passwords.

Ignore Changes

and Exit

Exits Computer Setup without applying or

saving any changes.

Save Changes and Exit Saves changes to system configuration and

exits Computer Setup.

✎Support for specific Computer Setup options may vary depending on your hardware

configuration.

Computer Setup (F10) Utility Guide www.hp.com 5

Computer Setup (F10) Utility Guide

Storage Device Configuration Lists all installed storage devices. When a

device is selected, detailed information and

options are displayed. The following options

may be presented:

Diskette Type

Identifies the highest capacity media type

accepted by the diskette drive.

Legacy Diskette Drives

Options are 3.5" 1.44 MB, 5.25" 1.2 MB,

and Not Installed.

Save/Restore for the HP Drive Key is

supported.

Drive Emulation

Allows you to select a drive emulation type for

a certain storage device. (For example, a Zip

drive can be made bootable by selecting

diskette emulation.)

ATAPI Zip drive None (treated as Other).

Diskette (treated as

diskette drive).

Disk (treated as hard

drive).

IDE Devices

Drive Type Emulation Options

Hard Disk No emulation options

available.

Diskette No emulation options

available.

✎Support for Computer Setup options may vary depending on your specific hardware

configuration.

Computer Setup (Continued)

Heading Option Description

6 www.hp.com Computer Setup (F10) Utility Guide

Computer Setup (F10) Utility Guide

Storage

(continued)

Device Configuration

(continued)

IDE Devices (continued)

Drive Type Emulation Options

CD-ROM No emulation options

available.

Transfer Mode (IDE devices only)

Specifies the active data transfer mode.

Options (subject to device capabilities)

are PIO 0, Max PIO, Enhanced DMA,

Ultra DMA 0, and Max UDMA.

Translation Mode (IDE disks only)

Lets you select the translation mode to be

used for the device. This enables the BIOS

to access disks partitioned and formatted

on other systems and may be necessary

for users of older versions of UNIX

(e.g., SCO UNIX version 3.2). Options are

Bit-Shift, LBA Assisted, User, and None.

ÄCAUTION: Ordinarily, the translation

mode selected automatically by the BIOS

should not be changed. If the selected

translation mode is not compatible with

the translation mode that was active when

the disk was partitioned and formatted,

the data on the disk will be inaccessible.

✎Support for Computer Setup options may vary depending on your specific hardware

configuration.

Computer Setup (Continued)

Heading Option Description

Andere Handbücher für Rp5000 - Point of Sale System

Inhaltsverzeichnis

Andere HP Touch-Terminal Handbücher

HP RP7 Model 7800 Bedienungsanleitung

HP Rp5000 - Point of Sale System Betriebsanleitung

HP Rp5000 - Point of Sale System Einrichtungshandbuch

HP Engage Go Convertible System Bedienungsanleitung

HP HP700/92 Bedienungsanleitung

HP rp5800 Handbuch

HP RP7 Model 7800 Bedienungsanleitung

HP RP7 Model 7800 Handbuch

HP Rp3000 - Point of Sale System Gebrauchsanweisung

HP Engage One Pro Bedienungsanleitung

HP ap5000 Gebrauchsanweisung

HP 262SA Bedienungsanleitung

HP Rp5000 - Point of Sale System Bedienungsanleitung

HP rp5800 Montageanleitung

HP 2624 Bedienungsanleitung

HP 2640N Bedienungsanleitung

HP 2621B Bedienungsanleitung

HP Rp5000 - Point of Sale System Bedienungsanleitung

HP RP7 Model 7800 Bedienungsanleitung

HP rp5800 Bedienungsanleitung

HP Engage Go Convertible System Bedienungs- und Wartungshandbuch

HP Engage Go 10 Bedienungsanleitung

HP Rp5000 - Point of Sale System Bedienungsanleitung

Beliebte Touch-Terminal Handbücher anderer Marken

Ingenico

Ingenico AXIUM EX4000 Bedienungsanleitung

Heisei Electronics

Heisei Electronics Q-POS 815 Bedienungsanleitung

Amano

Amano MTX-15 Bedienungsanleitung

FLOWBIRD

FLOWBIRD CWT Compact Touch Bedienungsanleitung

Demco

Demco SP7 Bedienungsanleitung

Lathem

Lathem PC600 Series Bedienungsanleitung

Partner

Partner MF-2352 Bedienungsanleitung

NCR

NCR RealPOS 7460-2 Handbuch

Simrad

Simrad MS50 Montageanleitung

Unitech

Unitech MR350 MKII Kurzanleitung

Jungheinrich

Jungheinrich WMT 210 Bedienungsanleitung

Motorola

Motorola MTP850 Bedienungsanleitung

YASKAWA

YASKAWA 62H-MDC0 Bedienungsanleitung

MVG industries

MVG industries NeptuLink Bedienungsanleitung

Price Industries Limited

Price Industries Limited FDC Gebrauchsanweisung

Honeywell

Honeywell TemaKey Bedienungsanleitung

EBN

EBN BPC65-B-A16G Bedienungsanleitung

Prestel

Prestel VCS-G2PRO Bedienungsanleitung