HP MSM-802.11n Gebrauchsanweisung

Models

HP MSM410 Access Point (US)

J9426B

HP MSM410 Access Point (JP)

J9529B

HP MSM410 Single Radio 802.11n AP (IL)

J9616A

HP MSM410 Access Point (WW)

J9427C

Key features

Single radio IEEE 802.11 a/b/g/n access point

Capability to work with wireless controller and in autonomous mode

Comprehensive WLAN security

Protection against rogue IEEE 802.11a/b/g/n access points and client

Indoor enclosure

Product overview

offers intelligent IEEE 802.11n wireless access points, ranging from our single-radio 802.11a/b/g/n to our dual 802.11a/b/g/n access

points. The MSM access points are advanced wireless devices that provide consistent, easy-to-manage connectivity that expands your

existing network. The access points maintain your network without interruption and reduce bottlenecks and network complexity by

determining where data needs to go throughout the network. The MSM access points provide complete wireless coverage for greater

reliability and connectivity and can be used in managed mode as well as autonomous mode without a controller.

Working in unison with HP MSM controllers, the HP MSM-802.11n Access Point Series delivers high-performance networking solutions.

The enhanced controller architecture scales to IEEE 802.11n without requiring a controller replacement. The MSM controller provides

advanced radio resource management (RRM), including client load balancing and interference mitigation. The MSM wireless controllers

support a fast-roaming capability, an important feature, especially for VoIP communications.

Wireless security is comprehensive with integrated Wireless IDS and support for internal and external authentication, authorization,

and accounting (AAA) servers; built-in stateful firewall; per-user VLAN mapping; and authentication.

Features and benefits

Management

Wi-Fi Clear Connect

provides a system-wide approach to improve WLAN reliability by proactively determining and adjusting to changing RF

conditions; helps optimize WLAN performance by identifying rogue activity and making decisions at a system-wide level

Advanced radio resource management

Automatic radio power adjustments

include real-time power adjustments based on changing environmental conditions and signal coverage adjustment

Automatic radio channel

provides intelligent channel switching and real-time Interference detection

Intelligent client load balancing

determines number of clients across neighboring APs and adjusts client allocation to balance the load

Airtime fairness

provides equal RF transmission time for wireless clients

QuickSpecs

HP MSM-802.11n Access Point Series

Overview

DA - 13900 Worldwide — Version 9 — December 20, 2013

Page 1

Integrated IDS (Premium Mobility version required)

detects and locates unknown and rogue devices

Access point management

provides secure Web browser (SSL, VPN), command-line interface, SNMP v2c, SNMP v3, MIB-II with traps, and RADIUS

Authentication Client MIB (RFC 2618); offers embedded HTML management tool with secure access (SSL and VPN); implements

scheduled configuration and firmware upgrades from a central controller

HP Intelligent Management Center and Wireless Services Manager Software

provides central management for discovery, logging, status, and configuration management

Diagnostics

client event log records association, authentication, and DHCP events; packet capture tool for Ethernet and IEEE 802.11

interfaces (PCAP format); data rate matrix

Enhanced AP survivability

continues to operate using the old IP address while the AP searches for a new controller

Quality of Service

(QoS)

Rate limiting

supports per-wireless client ingress-enforced maximums and per-wireless client, per-queue guaranteed minimums

Centralized traffic

Layer 2 and Layer 3 QoS settings are maintained when using Mobility Traffic Manager or guest access

IEEE 802.1p prioritization

delivers data to devices based on the priority and type of traffic

Wireless

L2/L3/L4 classification

IEEE 802.1p VLAN priority, SpectraLink SVP, and DiffServ

Assigned by VSC

Wi-Fi MultiMedia (WMM), IEEE 802.11e EDCF, and Service-Aware priority

Maximum VoIP call capacity

12 active calls on IEEE 802.11 a/b/g/n

SpectraLink Voice Priority (SVP) support

prioritizes SpectraLink voice IP packets sent from a SpectraLink NetLink SVP server to SpectraLink wireless voice handsets to

help ensure excellent voice quality

Connectivity

IEEE 802.3af Power over Ethernet (PoE) support

simplifies deployment and dramatically reduces installation costs by helping to eliminate the time and cost involved in supplying

local power at each access point location

Auto-MDIX

automatically adjusts for straight-through or crossover cables on all 10/100 ports

Mobility

Anywhere, anytime wireless coverage

includes a single radio IEEE 802.11a/b/g/n access point; per-radio software-selectable configuration of frequency bands; self-

healing, self-optimizing local mesh that extends network availability; Wi-Fi Alliance Certification for interoperability with all IEEE

802.11a/b/g/n client devices; and IEEE 802.3af PoE

Medical standards

meets the European EN60601-1-2 standard for healthcare

Interoperability

Wi-Fi Alliance Certifications, including IEEE 802.11g Wi-Fi and WPA2, to help ensure multivendor interoperability

QuickSpecs

HP MSM-802.11n Access Point Series

Overview

DA - 13900 Worldwide — Version 9 — December 20, 2013

Page 2

Virtual Service Communities (VSCs)

includes up to 16 SSIDs, each with unique MAC address and configurable SSID broadcasts; individual security and QoS profiles

per VSC; configurable DTIM and minimum data rate per VSC; VSCs that can be mapped to separate IEEE 802.1Q VLANs; WMM

and/or WMM-PS; a security filter; and an IP filter

AP client access control functions

IEEE 802.1X authentication using EAP-SIM, EAP-FAST, EAP-TLS, EAP-TTLS, and PEAP

MAC address authentication using local or RADIUS access lists

RADIUS AAA using EAP-MD5, PAP, CHAP, and MS-CHAPv2

RADIUS Client (RFC 2865 and 2866) with location-aware support

Layer 2 wireless client isolation

Security

Integrated IDS support (Premium Mobility version required)

Automated AP and client classification

reduces manual effort (administrator can override AP classification)

Comprehensive detection capabilities

detects a wide range of attacks

Flexible event reporting

enables configuration of which events will result in notifications

Location tracking capabilities

helps identify the location of the rogue device

Flexible deployment models

supports time slicing or dedicating a radio to detect fulltime

IEEE 802.1X support

provides port-based user authentication with support for Extensible Authentication Protocol (EAP) MD5, TLS, TTLS, and PEAP

with choice of AES, TKIP, and static or dynamic WEP encryption for protecting wireless traffic between authenticated clients and

the access point

Choice of IEEE 802.11i, WPA2, or WPA

locks out unauthorized wireless access by authenticating users prior to granting network access; robust Advanced Encryption

Standard (AES) or Temporal Key Integrity Protocol (TKIP) encryption secures the data integrity of wireless traffic

TKIP/WEP encryption

is supported only on legacy IEEE 802.11a/b/g clients as it has been deprecated from the IEEE 802.11n standard

Local wireless bridge client traffic filtering

when enabled, prevents communication between wireless devices associated with the same access point

Additional information

RFC support

refer to the "Mobility Specification Sheet" for a list of RFCs and other industry standards supported by the MSM solution at

http://h17007.www1.hp.com/docs/mobility/4AA3-3883ENW.pdf

Warranty and support

Lifetime warranty

for as long as you own the product with advance replacement and next-business-day delivery (available in most countries)†

Electronic and telephone support

limited electronic and telephone support is available from HP; to reach our support centers, refer to

www.hp.com/networking/contact-support

; for details on the duration of support provided with your product purchase, refer

www.hp.com/networking/warrantysummary

QuickSpecs

HP MSM-802.11n Access Point Series

Overview

DA - 13900 Worldwide — Version 9 — December 20, 2013

Page 3

Software releases

to find software for your product, refer to

www.hp.com/networking/support

; for details on the software releases available

with your product purchase, refer to

www.hp.com/networking/warrantysummary

†HP warranty includes repair or replacement of hardware for as long as you own the product, with next business day advance

replacement (available in most countries). The disk drive included with HP AllianceOne Advanced Services and Services zl Modules, HP

Threat Management Services zl Module, HP AllianceOne Extended zl Module with Riverbed Steelhead, HP MSM765zl Mobility Controller

and HP Survivable Branch Communication zl Module powered by Microsoft® Lync has a five-year hardware warranty. For details, refer

to the Software license and hardware warranty statements at

www.hp.com/networking/warranty

QuickSpecs

HP MSM-802.11n Access Point Series

Overview

DA - 13900 Worldwide — Version 9 — December 20, 2013

Page 4

Build To Order:

BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or Rack-Shippable solution.

HP MSM410 Access Point (US)

J9426B

1 RJ-45 autosensing 10/100/1000 port

See Configuration

Note:1

HP MSM410 Access Point (WW)

J9427C

1 RJ-45 autosensing 10/100/1000 port

See Configuration

Note:2

HP MSM410 Access Point (JP)

J9529B

1 RJ-45 autosensing 10/100/1000 port

HP MSM410 Single Radio 802.11n AP (IL)

J9616A

1 RJ-45 autosensing 10/100/1000 port

See Configuration

Note:3

Configuration Rules:

Note 1

Only available in US. (Warning in Clic only)

Note 2

Not available US and Israel. (Warning in Clic only)

Note 3

Only available in Israel. (Warning in Clic only)

External Power Supplies

Access Point Options

HP MSM31x/MSM32x Power Supply

J9405B

Not Racked

See Configuration

Note:1

HP 1-port Power Injector

J9407B

Not Racked

See Configuration

Note:1

Configuration Rules:

Note 1

Localization required. (See Localization Menu)

External Antenna

HP 5 dBi Indoor/Outdoor Omnidirectional Antenna

J8441A

QuickSpecs

HP MSM-802.11n Access Point Series

Configuration

DA - 13900 Worldwide — Version 9 — December 20, 2013

Page 5

HP 8 dBi Outdoor Omnidirectional Antenna

J8444A

HP 3 dBi Dual Band Diversity Antenna

J8997A

HP 7 dBi Dual Band Directional Antenna

J8999A

HP Antenna Lightning Arrester

J8996A

HP Dual Band Indoor Short Omnidirectional Antenna

J9401A

QuickSpecs

HP MSM-802.11n Access Point Series

Configuration

DA - 13900 Worldwide — Version 9 — December 20, 2013

Page 6

HP MSM410 Access Point (US) (J9426B)

HP MSM410 Access Point (JP) (J9529B)

HP MSM410 Single Radio 802.11n AP (IL) (J9616A)

HP MSM410 Access Point (WW) (J9427C)

Ports

1 RJ-45 autosensing 10/100/1000 port (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE

802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only

1 RJ-45 serial console port

AP characteristics

Radios

Single (a/b/g/n)

Radio operation modes

Client access, Local mesh, Packet capture

AP operation modes

Autonomous and controlled

Wi-Fi Alliance

Certification

a/b/g/n Wi-Fi Certified

Physical characteristics

Dimensions

5.19(w) x 6.16(d) x 1.94(h) in (13.17 x 15.64 x 4.94 cm)

Weight

0.72 lb (0.33 kg) mounting bracket

Enclosure

Indoor, plenum rated

Memory and processor

Processor

Single core @ 384 MHz, 128 MB flash, 256 MB SDRAM

Mounting

Includes two mounting clips

Environment

Operating temperature

32°F to 122°F (0°C to 50°C)

Operating relative

humidity

5% to 95%, noncondensing

Nonoperating/Storage

temperature

-40°F to 158°F (-40°C to 70°C)

Nonoperating/Storage

relative humidity

5% to 95%, noncondensing

Electrical characteristics

Description

IEEE 802.3af PoE compliant for Gigabit Ethernet

Maximum power rating

8 W

Antenna

(3) Integrated, dual-band 2.4/5 GHz omnidirectional antennas

Number of internal

antennas

Frequency band and

Operating channels

FCC

2.412 - 2.462 GHz (1 - 11 channels)

5.180 - 5.240 GHz (36 - 48 channels)

5.260 - 5.320 GHz (52 - 64 channels)

5.500 - 5.700 GHz (100 - 140 (excluding 120, 124 and 128) channels)

5.745 - 5.825 GHz (149 - 165 channels)

European Union

2.412 - 2.472 GHz (1 - 13 channels)

5.180 - 5.240 GHz (36 - 48 channels)

Rest of World (Actual

channels designated by

selecting country in UI)

2.412 - 2.472 GHz (1 - 13 channels)

5.180 - 5.240 GHz (36 - 48 channels)

5.260 - 5.320 GHz (52 - 64 channels)

5.500 - 5.700 GHz (100 - 140 channels)

5.745 - 5.825 GHz (149 - 165 channels)

QuickSpecs

HP MSM-802.11n Access Point Series

Technical Specifications

DA - 13900 Worldwide — Version 9 — December 20, 2013

Page 7

Taiwan

2.412 - 2.462 GHz (1 - 11 channels)

5.280 - 5.320 GHz (56 - 64 channels)

5.745 - 5.825 GHz (149 - 165 channels)

Japan

2.412 - 2.472 GHz (1 - 13 channels)

5.180 - 5.240 GHz (36 - 48 channels)

5.260 - 5.320 GHz (52 - 64 channels)

Israel

2.412 - 2.472 GHz (1 - 13 channels)

5.180 - 5.240 GHz (36 - 48 channels)

5.260 - 5.320 GHz (52 - 64 channels)

European Union (J9427B)

2.412 - 2.472 GHz (1 - 13 channels)

5.180 - 5.240 GHz (36 - 64 channels)

5.260 - 5.320 GHz (52 - 64 channels)

5.500 - 5.700 GHz (100 - 140 (excluding 5600-5650 MHz) channels)

Radio

FCC Part 15.247; FCC Part 15.407 (US); RSS-210 (Canada); EN 300 328; ARIB STD-T66; IDA Registration

(Singapore); RCR STD-33; ARIB STD-T71 (Japan); EN 301 893 (EU); KCC

approval (Korea)

Safety

UL 2043; UL 60950-1; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1

Medical

EN60601-1-2

RF Exposure

FCC Bulletin OET-65C; RSS-102; CFR 47, Part 2, Subpart J; ANSI/IEEE C95.1 (99); Ministry of Health Safety

Code 6; Australian Radiation Protection Std.

Features

Single radio: IEEE 802.11n for high-throughput applications and IEEE 802.11a/b/g for legacy support

- Integrated antennas for both IEEE 802.11a/b/g (diversity) and 802.11n (3x3 MIMO)

- Will operate the radio at full power on IEEE 802.3af PoE for Gigabit Ethernet

Emissions

EN 55022 Class B, EN 301 489-1, EN 301 489-17, ICES-003 Class B, FCC Part 15, Class B

Notes

Maximum transmit power varies by country.

Services

3-year, 4-hour onsite, 13x5 coverage for hardware (UN683E)

3-year, 4-hour onsite, 24x7 coverage for hardware (UN684E)

3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UN686E)

3-year, 24x7 SW phone support, software updates (UN685E)

1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR939E)

1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR940E)

1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support

(HR941E)

4-year, 4-hour onsite, 13x5 coverage for hardware (US013E)

4-year, 4-hour onsite, 24x7 coverage for hardware (US014E)

4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (US015E)

4-year, 24x7 SW phone support, software updates (US016E)

5-year, 4-hour onsite, 13x5 coverage for hardware (US017E)

5-year, 4-hour onsite, 24x7 coverage for hardware (US018E)

5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (US019E)

5-year, 24x7 SW phone support, software updates (US020E)

3 Yr 6 hr Call-to-Repair Onsite (UW416E)

4 Yr 6 hr Call-to-Repair Onsite (UW417E)

5 Yr 6 hr Call-to-Repair Onsite (UW418E)

1-year, 6 hour Call-To-Repair Onsite for hardware (HR943E)

1-year, 24x7 software phone support, software updates (HR942E)

1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange

(HS830E)

QuickSpecs

HP MSM-802.11n Access Point Series

Technical Specifications

DA - 13900 Worldwide — Version 9 — December 20, 2013

Page 8

1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS831E)

3-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange

(HS832E)

3-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS833E)

4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange

(HS834E)

4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS835E)

5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange

(HS836E)

5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS837E)

Refer to the HP website at:

www.hp.com/networking/services

for details on the service-level descriptions

and product numbers. For details about services and response times in your area, please contact your local

HP sales office.

NOTE:

These radio characteristics apply to all the products in this series.

IEEE 802.11n 5 GHz @ 20 MHz

Data rate

MCS0/MCS8 Mbps

MCS7/MCS15 Mbps

Receiver sensitivity

-95 dBm -77 dBm

Transmit power 18 dBm 10 dBm

IEEE 802.11n 5 GHz @ 40 MHz

Data rate

MCS0/MCS8 Mbps

MCS7/MCS15 Mbps

Receiver sensitivity

-92 dBm -74 dBm

Transmit power 17 dBm 10 dBm

IEEE 802.11n 2.4 GHz @ 20 MHz

Data rate

MCS0/MCS8 Mbps

MCS7/MCS15 Mbps

Receiver sensitivity

-96 dBm -79 dBm

Transmit power 19 dBm 10 dBm

IEEE 802.11n 2.4 GHz @ 40 MHz

Data rate

MCS0/MCS8 Mbps

MCS7/MCS15 Mbps

Receiver sensitivity

-91 dBm -75 dBm

Transmit power 17 dBm 10 dBm

IEEE 802.11a

Data rate

6 Mbps

54 Mbps

Receiver sensitivity

-95 dBm -82 dBm

Transmit power 18 dBm 12 dBm

IEEE 802.11b

Data rate

1 Mbps

11 Mbps

QuickSpecs

HP MSM-802.11n Access Point Series

Technical Specifications

DA - 13900 Worldwide — Version 9 — December 20, 2013

Page 9

Receiver sensitivity

-96 dBm -92 dBm

Transmit power

18.5 dBm 18.5 dBm

IEEE 802.11g

Data rate

6 Mbps

54 Mbps

Receiver sensitivity

-96 dBm -83 dBm

Transmit power 18 dBm 13 dBm

Standards and protocols

(applies to all products in

series)

Mobility

IEEE 802.11a High Speed Physical Layer in the 5 GHz Band

IEEE 802.11b Higher-Speed Physical Layer Extension in the 2.4 GHz Band

IEEE 802.11d Global Harmonization

IEEE 802.11g Further Higher Data Rate Extension in the 2.4 GHz Band

IEEE 802.11i Medium Access Control (MAC) Security Enhancements

IEEE 802.11n WLAN Enhancements for Higher Throughput

MCS Index

800 nS Guard Interval 400 nS Guard Interval

20 MHz Rate (Mbps) 40 MHz Rate (Mbps) 20 MHz Rate (Mbps) 40 MHz Rate (Mbps)

6.5

13.5

7.2

1 13 27

14.4

19.5 40.5 21.7

3 26 54

28.9

4 39 81

43.3

5 52 108

57.8

120

58.5

121.5

65 135

7 65 135

72.2

157.5

8 13 27

14.4

9 26 54

28.9

10 39 81

43.3

11 52 108

57.8

120

12 78 162

86.7

180

13 104 216

115.6

240

14 117 243 130 270

15 130 270

144.4

300

QuickSpecs

HP MSM-802.11n Access Point Series

Technical Specifications

DA - 13900 Worldwide — Version 9 — December 20, 2013

Page 10

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere HP Drahtloser Zugangspunkt Handbücher

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung