HP ProCurve Radio Port 230 Bedienungsanleitung

Installation and

Getting Started Guide

www.procurve.com

ProCurve Radio Port 230/210

L.P. The information contained herein is subject to change with-

out notice.

This document contains proprietary information, which is

protected by copyright. No part of this document may be

photocopied, reproduced, or translated into another

language without the prior written consent of Hewlett-

Packard.

Publication Number 5991-8629

September 2007

Applicable Products

Trademark Credits

Windows NT®, Windows®, and MS Windows® are US

registered trademarks of Microsoft Corporation.

Disclaimer

HEWLETT-PACKARD COMPANY MAKES NO WARRANTY

OF ANY KIND WITH REGARD TO THIS MATERIAL,

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS

FOR A PARTICULAR PURPOSE. Hewlett-Packard shall not

be liable for errors contained herein or for incidental or

consequential damages in connection with the furnishing,

performance, or use of this material.

The only warranties for HP products and services are set

forth in the express warranty statements accompanying

such products and services. Nothing herein should be

construed as constituting an additional warranty. HP shall

not be liable for technical or editorial errors or omissions

contained herein.

Hewlett-Packard assumes no responsibility for the use or

reliability of its software on equipment that is not furnished

by Hewlett-Packard.

Warranty

See the Software License, Warranty and Support booklet

included with the product.

A copy of the specific warranty terms applicable to your

Hewlett-Packard products and replacement parts can be

obtained from your HP Sales and Service Office or

authorized dealer.

ProCurve Radio Port 230

ProCurve Radio Port 210

J9006A

J9004A

iii

Contents

Introduction

ProCurve Radio Port 230 and 210 Package Contents . . . . . . . . . . . . 1-1

Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Dimensions & Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

Radio Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

Integrated RJ-45 Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5

Radio Port 230 LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5

Startup: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5

Normal Operation: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6

Radio Error Mode: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6

Radio Port 210 LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6

Startup Radio: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6

Normal Operation: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6

Radio Error Mode: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6

Installation Instructions

Safety Wire Tie Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

Wall Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

Wall Mount Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

Wall Mount Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

Safety Wire Tie Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5

RJ45 Wiring Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6

Suspended Ceiling Tile T-Bar Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7

Ceiling Mount Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7

Ceiling Mount Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7

To Install the Radio Port on the T-Bar: . . . . . . . . . . . . . . . . . . . . . . 2-7

To Remove the Radio Port from the T-Bar: . . . . . . . . . . . . . . . . . . 2-8

Troubleshooting Radio Port Installation

Startup Error Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

HP Customer Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3

Before Calling Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

Safety and Regulatory Statements

Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1

Regulatory Statements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2

Notice for U.S.A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2

Notice for European Community . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3

Operation Using 5 GHz Channels in the

European Community . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-5

EU Declaration of Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-6

Notice For Japan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-7

Notice For Taiwan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-8

Recycle Statements

Waste Electrical and Electronic Equipment (WEEE)

Statements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1

Introduction

1-1

Introduction

The ProCurve Radio Port 230 and ProCurve Radio Port 210, components of

the ProCurve Wireless LAN System, link wireless IEEE 802.11a/b/g devices to

the Ethernet network through a wireless services-enabled switch. Wireless

services-enabled switches include:

■ProCurve Switch 5300xl Series with a ProCurve Wireless Edge Services

xl Module

■ProCurve zl switches (such as 5400zl or 8200zl series) with a ProCurve

Wireless Edge Services zl Module

■Other compatible wireless services-enabled switch products.

The radio ports are designed as simple plug-and-play devices that require no

individual device configuration before network installation. All Radio port

configurations, including: country-specific settings, radio channels, radio

power, SSID settings, security settings, management information, and radio

port software is provided through the wireless services-enabled switch.

NOTE Before installing radio ports, a ProCurve wireless services-enabled switch

should be deployed, configured and operational. For details, see the Getting

Started Guide for your Wireless Edge Services Module.

ProCurve Radio Port 230 and 210

Package Contents

■ProCurve Radio Port 230 or Radio Port 210

■Two wall mount screws

■Two wall anchors

■Installation and Getting Started Guide

■Software License, Warranty and Support booklet

1-2

Introduction

Description

Introduction

Description

The ProCurve Radio Port 230 is a dual-radio IEEE 802.11-compliant device

supporting simultaneous IEEE 802.11a and b/g wireless Ethernet connections.

It contains two embedded IEEE 802.11 b/g (2.4 GHz) omni directional diversity

antennas, and two embedded IEEE 802.11a (5.4 GHz) omni directional diver-

sity antennas.

The ProCurve Radio Port 210 is a single radio IEEE 802.11-compliant device

supporting IEEE 802.11 b/g wireless Ethernet connections. It contains two

embedded IEEE 802.11 b/g (2.4 GHz) omni directional diversity antennas.

Both radio ports are designed for installation in office environments, either

using the wall mount or suspended-ceiling T-Bar mountings built into the

underside of the plastic case. Each radio port has one RJ-45 connector

supporting 10/100Base-TX Ethernet and requires power from any UL-listed,

IEEE 802.3af-compatible Power over Ethernet (PoE) switch or power

injector.

Technical Specifications

Dimensions & Weight

Operating Voltage 48VDC (from IEEE 802.3af-

compliant power source)

Operating Current 148mA (typical)

Power 7W (typical)

Operating Temperature 0 to 40° C (32 to 104° F)

Non-Operating/Storage

Temperature -40 to 70°C (-40°F to 158°F)

Operating Humidity 5 to 95% (non-condensing)

Non-Operating/Storage

Humidity 5 to 95% (non-condensing)

Operating Altitude (max) 3,048m (10,000ft.)

Non-Operating/Storage

Altitude 4,572m (15,000ft.)

Length 249.2mm (9.81in.)

Width 174.9mm (6.88in.)

Height 42.4mm (1.67in.)

Radio Port 230

Weight 0.55kg (1.214lbs)

Radio Port 210

Weight 0.50kg (1.096lbs)

1-3

Introduction

Features

Introduction

Features

■High-performance IEEE 802.11-compliant radios

■Embedded omni directional diversity antennas

■Integrated 10/100Base-TX RJ-45 port

■Two LEDs

■Safety wire tie point

■Lap-style lock port

■Slots for wall mounting

■Clips for mounting on a suspended ceiling T-Bar

LEDs

Wall Mount Slot

T-Bar Suspension Clips

Cable Recess

T-Bar Retaining Clip

1-4

Introduction

Radio Characteristics

Introduction

Radio Characteristics

The ProCurve Radio Port 230 comprises two IEEE 802.11 radios: (1) an IEEE

802.11 b/g radio operating in the 2.41 to 2.8 GHz band and (2) an IEEE 802.11a

radio operating in the 5.15 to 5.88 GHz band. The ProCurve Radio Port 210 has

a single IEEE 802.11b/g radio. Both units contain two embedded 2.41-2.8 GHz

omni-directional diversity antennas and the Radio Port 230 also contains two

embedded 5.1-5.88 GHz omni-directional diversity antennas.

The following table lists the IEEE 802.11-compliant operating modes. The

three supported IEEE 802.11g modes are simultaneous CCK and OFDM, CCK

only, or OFDM only.

For details on Transmit Power and Receiver Sensitivity values, reference the

Product Data Sheets located on the ProCurve Web site, www.procurve.com.

Integrated RJ-45 Port

Each radio port has one RJ-45 connector supporting a full-duplex 10/100Base-

TX Ethernet port, and requires IEEE 802.3af-compliant Power over Ethernet

(PoE) from an external source, such as a PoE switch or power injector. This

Ethernet port is configured as an MDI port and can be connected to any MDIX

switch port using standard straight-through CAT-5 Ethernet cables. For details

on cable pinouts, see the Installation and Getting Started Guide for your

ProCurve switch.

A single CAT-5 cable is used to supply both Ethernet connectivity and power

to the radio port allowing these radio ports to be installed up to 100 m (300

ft.) from a PoE-compliant 10/100Base-TX Ethernet port. There is no additional

power supply required.

Device Mbps Data Rate Support Utilizing

Diversity GHz

802.11a 6, 9, 12, 18, 24, 36, 48, 54

OFDM Transmit and

receive 5.1 to 5.88 range

802.11b/g 1, 2, 5.5, 11 CCK

6, 9, 12, 18, 24, 36, 48, 54

OFDM

Transmit and

receive 2.41 to 2.8 range

1-5

Introduction

LEDs

Introduction

LEDs

Each radio port has LEDs on the front of the case that display the device status.

The LEDs display connection status and error conditions, as well as network

activity for the individual radios in the radio port.

Radio Port 230 LEDs

The Radio Port 230 has two LEDs displaying connection status, error

conditions, and networking activity for each of the two radios. Operation

is as follows:

Startup:

Radio Port Startup occurs immediately following the application of PoE

power, or following a power or software reset.

1. Both GREEN and AMBER LEDs light steadily for several seconds, while

the radio port performs an internal self-test.

2. The AMBER LED then flashes 3 times per second, while the GREEN LED

is off. This indicates that the radio port is attempting to communicate to

a compatible wireless services-enabled switch.

3. Both LEDs then go off for a moment, followed by both LEDs lighting

steadily for a few seconds.

4. After this sequence, assuming no error conditions have occurred, the

radio port enters Normal operation mode. This indicates the radio port

has successfully communicated with and been adopted by a wireless

services-enabled switch. If this startup sequence repeats itself, it is likely

the radio port is unable to contact a compatible wireless services-enabled

switch, and the installer should review the Troubleshooting section.

LEDs

1-6

Introduction

LEDs

Introduction

Normal Operation:

Once the radio port establishes a connection to a compatible wireless

services-enabled switch, the radio port begins normal operation. During

normal operation, the GREEN LED indicates the status of the IEEE 802.11

b/g radio, and the AMBER LED indicates status of the IEEE 802.11a radio.

• Without Wireless Traffic: Each LED briefly flashes once every 5

seconds, this indicates that power is on and the radio port is commu-

nicating normally to its wireless services-enabled switch. The flashing

may not be synchronous between the two LEDs.

• With Wireless Traffic: Each LED briefly flashes more frequently than

once every 5 seconds, and in an irregular fashion, to represent wire-

less traffic on that radio.

Radio Error Mode:

• The GREEN LED flashes on and off steadily once per second if an

error prevents the IEEE 802.11b/g radio from operating normally.

• The AMBER LED flashes on and off steadily once per second if an

error prevents the IEEE 802.11a radio from operating normally.

Radio Port 210 LEDs

The Radio Port 210 has two LEDs displaying connection status, error

conditions, and networking activity for its IEEE 802.11 b/g radio. Opera-

tion is as follows:

Startup Radio:

• Operation of the indicators is identical to the Radio Port 230 during

Startup.

Normal Operation:

• During Normal Operation, the GREEN LED flashes to indicate

connection and traffic on the IEEE 802.11b/g radio, similar to the

Radio Port 230. The AMBER LED remains off.

Radio Error Mode:

• The GREEN LED flashes on and off steadily once per second if an

error prevents the IEEE 802.11b/g radio from operating normally.

Andere Handbücher für ProCurve Radio Port 230

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere HP Drahtloser Zugangspunkt Handbücher

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung