HT C2006 Bedienungsanleitung
Copyright HT ITALIA 2011 Release 2.01 – 06/07/2011
C2006-C2009
Manuale d'Installazione
Installation manual
Manual de instalación
Installationsanleitung
Copyright HT ITALIA 2011 Release EN 2.01 – 06/07/2011
ENGLISH
USB – Optical RS232 adapter
for HT ITALIA Instruments
INDEX:
1. INTRODUCTION......................................................................................................... 3
2. SYSTEM REQUIREMENTS........................................................................................ 3
3. DRIVERS INSTALLATION (WIN2K / XP / VISTA, WIN7) .......................................... 3
4. USING C2006 – C2009 ............................................................................................... 5
1. INTRODUCTION
Communication Cables C2006 and C2009 allow You to connect your HT instrument
(provided of optical or RS232 interface) to your PC through USB port creating a virtual
COM port to connect your PC to HT instruments.
2. SYSTEM REQUIREMENTS
Hardware:
Pentium III
64 Mbyte RAM
CD-ROM Driver
USB port
Mouse
Operating System
Win2k, XP, Vista, Win7
32 bit and 64 bit platforms
3. DRIVERS INSTALLATION (Win2k / XP / Vista, Win7)
The installation program will automatically check if your Operating system is
Windows2000, Xp, Vista, Win7.
Step 1
Do not connect your C2006 or C2009 cable to a
USB Port.
Insert CD-ROM into CD-
ROM driver and wait for
autorun.
Select the langu
age for the message which will
guide You through the drivers installation.
•OK Execute next step of installation
•CANCEL Quit installation
Step 2
Click on NEXT button in all windows to execute
the installation.
•NEXT Execute next step of installation
•CANCEL Quit installation
Step 3
Connect C2006 or C2009 USB connector to a
PC USB port.
•OK Execute next step of installation
Step 4
This window confirm the successful installation.
•Finish End of installation
4. USING C2006 – C2009
When the drivers installation has been successfully terminated, please check which
RS232 port has been associated to USB Serial Port item (see Table 1)
SYSTEM
DESCRIPTION
Win2k/XP Windows Control PanelSystemHardwareDevice ManagerPort (COM and LPT)
Vista/Win7 Windows Control PanelHardwareDevice ManagerPort (COM and LPT).
Table 1: Search for serial port associated to cable C2006 or C2009
CAUTION
HT recommends to associate USB Serial Port to a COM number within
COM1 and COM7 and when possible to COM1 or COM2 (as some HT
Software manage only COM1 and COM2)
To modify the COM Port number associated to cable C2006 or C2009 follow the herewith
steps:
1. Select the row “USB Serial Port (COMxxx)” in the section “Port (COM and LPT)”
2. Click with the right button of mouse on item “USB Serial Port (COMxxx)” and select
the herewith path (see Fig.1)
Property Port Settings Advanced
3. When You detect the COM port number associated to USB Serial Port, you have to set
the same COM port value into your HT SW Management (example: Eurolink, Toplink,
Topview, .etc.). Please see the Help ON line of the above mentioned programs to get
information about COM port selection
Fig. 1: Screens for modify COM port associated to C2006 or C2009 cable
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere HT Messgerät Handbücher
HT
HT 53 Bedienungsanleitung
HT
HT HT78 Bedienungsanleitung
HT
HT HT-5000 Bedienungsanleitung
HT
HT IRONMETER Bedienungsanleitung
HT
HT HT3300 Bedienungsanleitung
HT
HT HT78 Bedienungsanleitung
HT
HT HT9023 Bedienungsanleitung
HT
HT 4000 Bedienungsanleitung
HT
HT HT77N Bedienungsanleitung
HT
HT VEGA74 Bedienungsanleitung
HT
HT HT64 Bedienungsanleitung
HT
HT 64 Bedienungsanleitung
HT
HT PVCHECKs-PRO Bedienungsanleitung
HT
HT ECLIPSE HT9025 Bedienungsanleitung
HT
HT EASYTEST COMBI519 Bedienungsanleitung
HT
HT HT22D Bedienungsanleitung
HT
HT ISO410 Bedienungsanleitung
HT
HT SOLAR-02 Bedienungsanleitung
HT
HT HT7051 Bedienungsanleitung
HT
HT HT712 Bedienungsanleitung
