Huawei G530 V2 Kurzanleitung

Huawei G5500 Server G530 V2 Compute Node

1.0.0

White Paper

Issue 03

Date 2018-02-12

HUAWEI TECHNOLOGIES CO., LTD.

No part of this document may be reproduced or transmitted in any form or by any means without prior written

consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.

All other trademarks and trade names mentioned in this document are the property of their respective

holders.

Notice

The purchased products, services and features are stipulated by the contract made between Huawei and the

customer. All or part of the products, services and features described in this document may not be within the

purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,

and recommendations in this document are provided "AS IS" without warranties, guarantees or

representations of any kind, either express or implied.

The information in this document is subject to change without notice. Every effort has been made in the

preparation of this document to ensure accuracy of the contents, but all statements, information, and

recommendations in this document do not constitute a warranty of any kind, express or implied.

Huawei Technologies Co., Ltd.

Address: Huawei Industrial Base

Bantian, Longgang

Shenzhen 518129

People's Republic of China

Website: http://www.huawei.com

Email: [email protected]

Issue 03 (2018-02-12) Huawei Proprietary and Confidential

Contents

1 About This Document.................................................................................................................. 1

2 About the G530 V2 and GP316....................................................................................................3

2.1 Overview........................................................................................................................................................................ 3

2.2 Appearance..................................................................................................................................................................... 3

2.3 Ports................................................................................................................................................................................ 7

2.4 Indicators and Buttons.................................................................................................................................................... 7

2.5 Physical Structure........................................................................................................................................................... 9

2.6 Logical Structure.......................................................................................................................................................... 19

2.7 Technical Specifications............................................................................................................................................... 21

3 Product Features...........................................................................................................................23

4 Components..................................................................................................................................24

5 Management................................................................................................................................. 30

6 Warranty........................................................................................................................................ 32

Huawei G5500 Server G530 V2 Compute Node

White Paper Contents

Issue 03 (2018-02-12) Huawei Proprietary and Confidential

1 About This Document

Purpose

This document describes the general-purpose compute module G530 V2 and heterogeneous

compute module GP316 of the Huawei FusionServer G5500 server in terms of appearances,

features, performance parameters, and configurations, helping users have a deep

understanding of a compute node consisting of a G530 V2 and a GP316.

NOTE

In this document, a compute node consists a G530 V2 and a GP316.

Intended Audience

This document is intended for:

lHuawei presales engineers

lChannel partner presales engineers

lEnterprise presales engineers

Change History

Changes between document issues are cumulative. The latest document issue contains all

changes made in previous issues.

Issue 03 (2018-02-12)

This is the third official release.

Mode Change Description

Modify Changed ESN to SN and modified the description of the year and

month.

Issue 02 (2018-01-05)

This is the second official release.

Huawei G5500 Server G530 V2 Compute Node

White Paper 1 About This Document

Issue 03 (2018-02-12) Huawei Proprietary and Confidential

Mode Change Description

Modify Modified DIMM configuration rules.

New Added the B/D/F information of PCIe devices.

Delete Deleted the CPU list. To obtain CPU models, use the Huawei Server

Compatibility Checker.

Issue 01 (2017-10-20)

This issue is the first official release.

Huawei G5500 Server G530 V2 Compute Node

White Paper 1 About This Document

Issue 03 (2018-02-12) Huawei Proprietary and Confidential

2 About the G530 V2 and GP316

2.1 Overview

2.2 Appearance

2.3 Ports

2.4 Indicators and Buttons

2.5 Physical Structure

2.6 Logical Structure

2.7 Technical Specifications

2.1 Overview

The G530 V2 is a half-width compute module that uses the new-generation Intel® Xeon®

Scalable processors with the Purley platform to support a large memory capacity and deliver

powerful computing capabilities. The GP316 supports a maximum of 16 half-height half-

length single-slot PCIe slots for installing general-purpose GPU (GPGPU) cards and is used

together with the G530 V2 to expand the computing capabilities.

The G530 V2 and GP316 are installed in a G5500 chassis (chassis for short) and centrally

managed by the management module. Each chassis can be installed with a maximum of two

compute nodes, and each compute node contains a G530 V2 and a GP316.

2.2 Appearance

Appearances of the G530 V2 and GP316

Figure 2-1 and Figure 2-2 show the appearances of the G530 V2 and GP316.

Huawei G5500 Server G530 V2 Compute Node

White Paper 2 About the G530 V2 and GP316

Issue 03 (2018-02-12) Huawei Proprietary and Confidential

Figure 2-1 Appearance of the G530 V2

Figure 2-2 Appearance of the GP316

Installation Position

The G530 V2 compute modules are installed in the lower two slots of the chassis,

corresponding to G530 V2-1 and G530 V2-2. The GP316 heterogeneous compute modules

used together with the G530 V2 compute modules are installed in the upper two slots of the

chassis, corresponding to GP316-1 and GP316-2. See Figure 2-3.

Huawei G5500 Server G530 V2 Compute Node

White Paper 2 About the G530 V2 and GP316

Issue 03 (2018-02-12) Huawei Proprietary and Confidential

Figure 2-3 Installation positions of the G530 V2 and GP316 modules

NOTE

lA maximum of two G530 V2 compute modules can be installed in a chassis, and each G530 V2

combines with the GP316 in its upper slot to form a G530 V2 compute node. The two combinations

are independent of each other. When configuring only one compute node, select the combination

(G530 V2-1 and GP316-1) on the left.

lIn each combination, the G530 V2 and GP316 must be installed and removed in the following

sequence: Install the GP316 and then the G530 V2. Remove the G530 V2 and then the GP316.

lMaintaining one combination does not affect the proper operation of the other combination.

Front Panel

Figure 2-4 shows the front panel of the G530 V2.

Figure 2-4 Front panel of the G530 V2

1Label plate 2 USB 3.0 ports

3 Power button/indicator 4 UID button/indicator

5 HLY indicator 6 Release button

7 M.2 module adapter 8 M.2 module

9 Ejector lever 10 2.5-inch hard disk

Huawei G5500 Server G530 V2 Compute Node

White Paper 2 About the G530 V2 and GP316

Issue 03 (2018-02-12) Huawei Proprietary and Confidential

11 Hard disk activity indicator 12 Hard disk fault indicator

13 Product model 14 M.2 module activity indicator

15 M.2 module fault indicator 16 VGA port

Figure 2-5 shows the front panel of the GP316.

Figure 2-5 Front panel of the GP316

1 Ejector release button 2 Ejector lever

NOTE

When a compute node is installed in the chassis, the ejector release button and ejector lever on the

GP316 front panel are invisible because they are blocked by the G530 V2. After the G530 V2 is

removed, they can be seen.

A serial number (SN) is a string that uniquely identifies a server. A SN is required when you

apply for Huawei technical support.

Figure 2-6 shows the SN format.

Figure 2-6 SN example

Huawei G5500 Server G530 V2 Compute Node

White Paper 2 About the G530 V2 and GP316

Issue 03 (2018-02-12) Huawei Proprietary and Confidential

No. Description

1 Indicates the SN ID (two digits). The value is fixed to 21.

2 Indicates the item identification code (eight characters).

3 Indicates the vendor code (two characters). 10 indicates Huawei

and other values indicates manufacturing partners.

4 Indicates the year and month (two characters).

lThe first character indicates the year. The digits 1 to 9

indicate 2001 to 2009, the letters A to H indicate 2010 to

2017, the letters J to N indicate 2018 to 2022, and the letters

P to Y indicate 2023 to 2032.

NOTE

The years from 2010 are represented by upper-case letters excluding

I, O, and Z because the three letters are similar to the digits 1, 0, and

lThe second character indicates the month. The digits 1 to 9

indicate January to September, and the letters A to C indicate

October to December.

5 Indicates the sequence number (six digits).

6 Indicates RoHS compliance (one character). Y indicates

compliance.

7 Indicates the internal model of the board.

2.3 Ports

Table 2-1 Port description

Port Type Quantit

Description

USB port USB 3.0

Type A

2 The panel provides two USB 3.0 ports, which

are compatible with USB 2.0.

VGA port DB15 1 The panel provides a DB15 VGA port for local

maintenance of the compute node.

2.4 Indicators and Buttons

This section describes the indicators and buttons of the G530 V2.

Huawei G5500 Server G530 V2 Compute Node

White Paper 2 About the G530 V2 and GP316

Issue 03 (2018-02-12) Huawei Proprietary and Confidential

Inhaltsverzeichnis

Andere Huawei Steuereinheit Handbücher

Huawei

Huawei MC509 Montageanleitung

Huawei

Huawei ME909u-523 Montageanleitung

Huawei

Huawei UPS5000-E-200K-SM Bedienungsanleitung

Huawei

Huawei MU709s-2 Montageanleitung

Huawei

Huawei MU509-b Benutzerhandbuch

Huawei

Huawei MU709Gs-8 Bedienungsanleitung

Huawei

Huawei SmartAX MA5600T Leitfaden

Huawei

Huawei RMS-SNMP01A Bedienungsanleitung

Huawei

Huawei MU609T Bedienungsanleitung

Huawei

Huawei MU736 HSPA+ M.2 Benutzerhandbuch

Huawei

Huawei UPS5000-E Series Bedienungsanleitung

Huawei

Huawei MU609 Montageanleitung

Huawei

Huawei MU509 Series Handbuch

Huawei

Huawei VP9660 Bedienungsanleitung

Huawei

Huawei SmartLi-ESM-24020P1 Bedienungsanleitung

Huawei

Huawei ME906E Bedienungsanleitung

Huawei

Huawei EM770S Bedienungsanleitung

Huawei

Huawei ME906A Montageanleitung

Huawei

Huawei SmartAX MA5675 Bedienungsanleitung

Huawei

Huawei MU609 Montageanleitung

Huawei

Huawei UPS5000-E Series Bedienungsanleitung

Huawei

Huawei MU509-65 Montageanleitung

Huawei

Huawei UPS5000-E-400K-SMS Bedienungsanleitung

Huawei

Huawei Atool Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung