Huawei B890 Bedienungsanleitung

B890 LTE Wireless Gateway

User Guide

English/Norwegian/Swedish/German

English

1Getting to know your device............................................................ 1

Appearance .................................................................................... 1

Handset screen icons ..................................................................... 4

2Installation ...................................................................................... 5

Installing the USIM card.................................................................. 5

(Optional) Installing the external antenna........................................ 5

Installing the handset battery .......................................................... 6

Connecting cables .......................................................................... 6

3Powering the device on................................................................... 7

4Registering the handset.................................................................. 7

5Setting up a Wi-Fi connection ......................................................... 8

Turning on Wi-Fi on the router ........................................................ 8

Recording the SSID and Wi-Fi key ................................................. 8

Setting up a Wi-Fi connection from a client..................................... 9

Setting up a Wi-Fi connection through WPS ................................. 12

6Configuring the router ................................................................... 12

7Using the handset......................................................................... 13

Call functions ................................................................................ 13

Message functions........................................................................ 13

Text input methods........................................................................ 14

Settings configuration ................................................................... 15

8FAQ .............................................................................................. 16

9Safety information......................................................................... 18

10 Legal Notice.................................................................................. 24

1 Getting to know your device

Figures in this guide are for your reference only. Specific models may vary slightly,

contact your service provider for more detailed information.

Appearance

Power indicator

On: the router is powered on.

Off: the router is powered off.

Network mode

indicator

Fast red blinking: no USIM card is found, the

PIN is not verified, or the USIM card is not

working properly.

Steady cyan: registered with an LTE network.

Steady blue: registered with a 3G network.

Off: no signal.

Wi-Fi/WPS

indicator

Steady on: Wi-Fi turned on or data transfer in

progress.

Blinking: a WPS connection is being set up.

Off: Wi-Fi turned off.

SMS indicator

Steady on: inbox is full.

Blinking: new messages.

Handset status

indicator

Steady on: at least one handset registered.

Fast blinking: handset registration in progress.

Slow blinking: handset paging in progress.

Off: no handsets registered.

Wireless dialing

indicator

Steady on: connected to the Internet via an

LTE/3G network.

Slow blinking: connecting to the Internet via

an LTE/3G network.

Off: not connected to an LTE/3G network.

/ /

LAN indicator

Steady on: LAN port is connected to a client.

Blinking: data is being transmitted through

LAN port.

Off: no client is connected to LAN port.

Ethernet dialing

indicator

Steady on: connected to the Internet via an

Ethernet network.

Slow blinking: connecting to the Internet via

an Ethernet network.

Off: not connected to an Ethernet network.

USB indicator

On: USB storage device connected.

Off: USB storage device not connected.

USIM card slot Install a USIM card to access to the Internet via

an LTE/3G data connection.

Dial-up button

Press this button to manually connect to or

disconnect from the Internet in manual mode.

The router can access to the Internet in Auto,

Manual, or On Demand mode. For details

about the access modes, see the help

information on the web management page.

Wi-Fi/WPS button

Press and hold for about 3 seconds to turn on

or off Wi-Fi.

Press and hold for 6 or more seconds to

active WPS connection when Wi-Fi is turned

on.

Power button

Press and hold for about 5 seconds to power the

router on or off.

Handset

registering/paging

button

Press and hold for 3 or more seconds to

Press to page all the registered handsets.

Power port Connect to compatible power adapter.

USB port

Connect to a USB storage device, or USB

printer.

This port cannot be connected to USB host

devices such as computers.

The router can provide a current up to 500mA.

If this port is connected to a portable hard disk

drive (or other peripherals) whose required

current beyond what the router can provide,

please use an auxiliary power supply for the

hard disk drive.

LAN port Connect to computer, switch, or other LAN

device.

WAN port

Connect to an Ethernet port on the wall through

a network cable if you want to access to the

Internet via wired way.

Reset button

Restoring the router to its factory settings will

deregister all the registered handsets and

erase all user settings (including the handset

base settings). If you want to remain the

handset base settings, log in to the web

management page to restore. For details, see

the help information on the web management

page.

When the router is powered on, use a sharply

pointed object to press and hold for about 3

seconds until all indicators are blinking to restore

the router to its factory settings. After the factory

defaults are restored, the router will restart

automatically.

Navigation keys

Access the main menu by pressing the OK

key in standby mode.

Access a shortcut menu by pressing the

corresponding navigation key in standby

mode.

Left function key Select the option displayed in the lower left

corner of the screen.

Speaker key

Activate the hands-free mode when making or

answering a call.

Call key

Make or answer a call.

View the dialed call log in standby mode.

Mute key

Press to mute or unmute an ongoing call.

Shortcut key

Press to use the shortcut function.

Intercommunication

key

Press to access the list of registered handsets in

standby mode.

Number and

symbol keys

Enter numbers, letters, and symbols.

Number keys (2–9): Speed-dial a user-

assigned phone number by pressing and

holding a key in standby mode.

# key: Switch between text input methods in

editing mode.

End key

End or reject a call.

Press and hold to power the handset on or off.

Clear key

Press to delete the character to the left of the

cursor in editing mode.

Right function key Select the option displayed in the lower right

corner of the screen.

Handset screen icons

Signal strength Battery level

Alarm clock Silent mode

Unread message

The handset is registered

with the router

The router is registered with

a 3G network

The router is registered with

an LTE network

Forwarding of all calls

enabled

2 Installation

Installing the USIM card

If you want to use LTE/3G wireless data service and voice service, please install

the USIM card.

1. Pull out the card slot cover and rotate it to reveal the USIM card slot.

2. Partially insert the USIM card into the card slot. Ensure that the beveled edge

of the USIM card aligns with that of the card slot. Gently push the card until it

clicks into place.

3. Close the card slot cover.

Before removing the USIM card, ensure that the router is powered off and

disconnected from the power outlet.

(Optional) Installing the external antenna

If you want to use LTE/3G wireless data and voice service, in areas with poor

reception, connect external antenna to the router's external antenna port to

improve signal reception.

Only use the external antenna indoors, and do not use it during thunderstorm.

Before using external antenna, log in to the web management page

(http://192.168.1.1) and set Antenna mode to Outer. For details, see the help

information on the web management page.

Install external antenna into the SMA1 port first. If it's necessary, screw another

external antenna fully into the SMA2 port to get a stronger receiving signal, and

place it at least 1 meter away from the external antenna installed on SMA1 port.

Only installing an external antenna to SMA2 port will result in your router not being

able to connect to the Internet.

Installing the handset battery

1. Slide the battery cover off.

2. Insert the battery into the battery slot. Ensure that the golden contacts of the

battery mate securely with those in the battery slot.

3. Slide the battery cover back onto the handset.

If the handset will not be used for a long time, remove the battery from the handset.

Connecting cables

After the router is installed, keep it upright, so the indicators are easy to see.

Furthermore, when placed flat, the router may be damaged due to poor heat

dissipation.

Ethernet port on the

wall Computer

USB flash drive Power adapter

The telephone port cannot be used at this time, connection with this port will bring no

response on your telephone.

3 Powering the device on

Once connected to a power outlet, the router automatically powers on.

To power the handset on, press and hold key until the screen lights up.

4 Registering the handset

Skip this section if is shown on your handset screen.

When registering a handset with the router, ensure that the handset is near the

router. After the handset is registered, use the handset within range of the router.

Otherwise, the handset will display a message and disconnect from the router.

You can register a maximum of 6 handsets with the router.

1. Press and hold on the router for over 3 seconds until blinks

quickly.

2. On the handset, select Menu > Settings > Handset > Register handset.

3. Press the up and down navigation keys to scroll to the base with which you

want to register the handset, and then enter the registration password.

The default registration password is 0000. To change the password, select Menu >

Settings > Base > Security > Change system PIN.

Wait until is shown on your handset screen, the handset is registered with

the router successfully.

To deregister the handset, select Menu > Settings > Handset > Deregister

handset. You cannot use the handset after it has been deregistered.

Andere Handbücher für B890

Inhaltsverzeichnis

Sprachen:

Andere Huawei Tor Handbücher

Huawei

Huawei HG655b Bedienungsanleitung

Huawei

Huawei HG659 Bedienungsanleitung

Huawei

Huawei eSpace IAD208E(M) Bedienungsanleitung

Huawei

Huawei HG659 Bedienungsanleitung

Huawei

Huawei B260 Technische Daten

Huawei

Huawei EchoLife HG8245A Technische Daten

Huawei

Huawei EchoLife HG520 Bedienungsanleitung

Huawei

Huawei B560 Bedienungsanleitung

Huawei

Huawei LTE CPE B5328-155 Technische Daten

Huawei

Huawei Pocket WiFi 3G Bedienungsanleitung

Huawei

Huawei HG532e Bedienungsanleitung

Huawei

Huawei RRU3808 V200 Bedienungsanleitung

Huawei

Huawei eA360 Series Bedienungsanleitung

Huawei

Huawei RRU3262 Bedienungsanleitung

Huawei

Huawei HG655a Bedienungsanleitung

Huawei

Huawei B311-221 Technische Daten

Huawei

Huawei HG552a1 Bedienungsanleitung

Huawei

Huawei ME60 Series Gebrauchsanweisung

Huawei

Huawei ECHOLIFE HG520C Bedienungsanleitung

Huawei

Huawei HG630a Bedienungsanleitung

Huawei

Huawei EchoLife HG510 Bedienungsanleitung

Huawei

Huawei EchoLife HG8247 Bedienungsanleitung

Huawei

Huawei HG256s Bedienungsanleitung

Huawei

Huawei H350L/B890-66s Bedienungsanleitung

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung

RTA

RTA 460MCBC-N2E Technisches Datenblatt