Huawei U-SYS IAD101H Bedienungsanleitung

U-SYS IAD101H/102H/104H Integrated Access

Device

V300R001C03

Quick Start

Issue 02

Date 2011-02-09

HUAWEI TECHNOLOGIES CO., LTD.

U-SYS IAD101H/102H/104H Integrated Access Device

Quick Start Contents

Issue 02 (2011-02-09) Huawei Proprietary and Confidential

- 1 -

Contents

1 Packing List............................................................................................................... 2

2 Safety Precautions ................................................................................................... 3

3 Installation ................................................................................................................ 5

4 Configuration (Command Line Mode)................................................................ 6

4.1 Logging In Through Telnet............................................................................................. 6

4.2 IAD(SIP) Accessing NGN/IP PBX ................................................................................ 7

4.3 IAD(MGCP) Accessing NGN/IP PBX ........................................................................... 9

4.4 IAD(SIP) Accessing IMS ..............................................................................................11

4.5 Accessing Network Through the IAD .......................................................................... 13

4.6 Setting the UCEMS Parameters ................................................................................... 14

5 FAQ .......................................................................................................................... 16

6 Technical Specifications....................................................................................... 17

1Packing List

U-SYS IAD101H/102H/104H Integrated Access Device

Quick Start

2 Huawei Proprietary and Confidential

Issue 02 (2011-02-09)

1Packing List

After you unpack the product package, check the items in the following table. If the

i the package are different from those in the table, contac rson.tems in t the sales pe

Item Quantity

IAD101H/102H/104H 1

Power supply adapter 1

Network cable 1

CD-ROM 1

Quick Start 1

Certificate 1

U-SYS IAD101H/102H/104H Integrated Access Device

Quick Start 2Safety Precautions

Issue 02 (2011-02-09) Huawei Proprietary and Confidential

2Safety Precautions

Pay attention to the following precautions when installing and using the device.

Basic Re i

zlaws and regulations, and respect the legal rights of others

en using this device.

Usage No ic

zmmended accessories,

d other potential

zally

s and network cables. Contact the

zl, or

ely.

zPrevent the objects (such as the metal) getting into the device from the heat

dissipation hole.

qu rements

Follow the requirements of the manufacturer to install the device.

zDo not disassemble the device. Contact the specified maintenance station if the

faults occur on the device.

zAny company or person cannot change the design of the structure, security, or

performance without permission.

Comply with the related

t e

Use the accessories shipped with the product and the reco

such as the power supply adapters and batteries. The power supply voltage must

meet the requirement on the input voltage of the device.

zKeep the power plug clean and dry to avoid the electric shock an

risks.

Keep your hands dry when plugging in or out the device cable.

Stop the device and turn off the power before plugging in or out the device cable.

In the lightning weather, turn off the power and remove all the cables from the

device, such as the power cable, network cable, and phone cable. Otherwise, the

device may be damaged by the lightning.

zIf you do not need to use the device for a long time, turn off the power and remov

the power plug.

Keep the water and other liquids away from the device. If the liquid accident

flows into the device, turn off the power immediately and remove all the cables

from the device, such as the power cable

specified maintenance station if faults occur.

Do not use the damaged or aged cables.

If exceptions occur, for example, the device is smoking, the sound is abnorma

the device turns smelly, stop using the device and turn off the power immediat

Remove all the cables connected to the device, such as the power cables and

network cables. Contact the specified maintenance station when faults occur

2Safety Precautions

U-SYS IAD101H/102H/104H Integrated Access Device

Quick Start

4 Huawei Proprietary and Confidential

Issue 02 (2011-02-09)

zAvoid scratch or wear and tear on the device shell. Otherwise, the dropped paint

may cause allergy or device exceptions. For example, short circuit may be caused if

the paint drops into the host.

zKeep children away from the device and accessories to avoid the dangerous

behaviors such as swallowing.

Cleaning Notice

zBefore you clean the device, stop the device and turn off the power. Remove all the

cables connected to the device, such as the power cables and network cables.

zWhen you clean the device, do not use the liquid cleaner or spray cleaner to clean

the device shell. Use the soft cloth to wipe and clean the shell.

Environment Requirements

zKeep the device dry when storing, transporting, and using the device.

zAvoid the collision when storing, transporting, and using the device.

zPlace the device in the indoor environment with good ventilation and without direct

and strong sunlight.

zKeep the device clean to avoid dust.

zDo not place any object on the device to avoid the overheating of the device or

damage caused by extrusion.

zClear the space with the radius of over 10 cm around the device for heat

dissipation.

zKeep the device away from the heat sources or exposed fire, such as the electrical

heater or candle.

zKeep the device away from the appliance with the strong magnetic field or

intensive electric field, such as the microwave oven, fridge, or mobile phone.

Environment Protection

zDo not discard the obsolete devices or batteries randomly. Discard them at the

specified recycle station.

zComply with the local laws and regulations on processing the device package

materials, consumed batteries, and obsolete devices, and support the recycling.

U-SYS IAD101H/102H/104H Integrated Access Device

Quick Start 3Installation

Issue 02 (2011-02-09) Huawei Proprietary and Confidential

3Installation

The IAD101H/102H/104H is the case-shaped device. You only need to connect cables.

1. Used for connecting to the uplink

device. Use a cable to connect to the

network adapter of the uplink device

(such as switch and route).

3. Connect the power-off survival

port for only IAD101H&102H. Use

a phone line to connect to the

phone port, thus accessing the

PSTN.

2. Use a

phone to

connect to a

phone.

4. Use a cable

to connect to

the LAN port.

5. Use the power

adapter to

connect to the

PWR port.

The IAD101H/102H/104H installation is similar. The IAD102H is taken as an example.

4Configuration (Command Line Mode)

U-SYS IAD101H/102H/104H Integrated Access Device

Quick Start

6 Huawei Proprietary and Confidential

Issue 02 (2011-02-09)

4Configuration (Command Line Mode)

You can configure the data of the IAD by using the command line.

GN/IP PBX

IAD

4.6 Setting the UCEMS Parameters

4.1 Lo

the

feature. You can enter a question mark (?) to obtain help and press Spacebar to

ete a command name.

Step 1

e IP address segment as “192.168.100.1” (for example,

Step 2 nk space + the actual IP address of the

click OK, as shown below.

4.1 Logging In Through Telnet

4.2 IAD(SIP) Accessing NGN/IP PBX

4.3 IAD(MGCP) Accessing N

4.4 IAD(SIP) Accessing IMS

4.5 Accessing Network Through the

gging In Through Telnet

The LAN port IP address of the IAD101H/102H/104H is 192.168.100.1 by default.

You can access the command line interface (CLI) of the IAD through Telnet.For

IAD104H, serial port is an alternative access. The CLI includes an interactive Help

compl

Proced re

Connect your PC to the LAN port of the IAD by a network cable, and then set the IP

address of your PC to the sam

192.168.100.2), and the subnet mask to 255.255.255.0. Ensure that you can ping

192.168.100.1 successfully.

Choose Start > Run, and enter “telnet” + a bla

IAD network port in the Run dialog box. Then

After a conn

Step 3 ection is established, enter user name root and password admin to log in

to the IAD.

U-SYS IAD101H/102H/104H Integrated Access Device

Quick Start 4Configuration (Command Line Mode)

Issue 02 (2011-02-09) Huawei Proprietary and Confidential

If you cannot access the IAD by the preceding method, set the IP address of your PC to the

same IP address segment as “1.1.1.1” and the subnet mask to 255.255.255.0. If you can ping

1.1.1.1 successfully, enter telnet 1.1.1.1 in the Run dialog box to log in to the IAD.

----End

P.S. How to Log In to the IAD104H

Connect your PC to the IAD through a serial cable. Choose Start > Programs >

Accessories > Communication > HyperTerminal, select “COM1” in the Connect To

dialog box (If logging in to the CLI fails, select COM2). In the COM1 Properties

dialog box, click Restore Defaults and click OK. Press Enter on the HyperTerminal

interface. After the welcome interface is displayed. Enter the user name (root by

default) and password (admin by default).

4.2 IAD(SIP) Accessing NGN/IP PBX

When the network is normally connected, if the IAD registers with the SIP server (for

example, Softswitch) successfully, it can implement the voice call function.

Data Preparation

Before configuring the IAD, you should obtain the following items of data from the

administrator.

Item Data Example

IAD IP address The IP address is obtained through dhcp. (You can

consult the network operator for how to obtain the

IP address of the device.)

IP address of the SIP Server 191.168.10.20

SIP user ID 88880008

Procedure

Step 1 Log in to the CLI with the user name root and password admin, and then run the

following commands to enter the global configuration mode.

Enter the privilege mode.

TERMINAL>enable

Enter the global configuration mode.

TERMINAL#configure terminal

(Optional) Set the system timeout interval to the maximum to avoid logging in to the

IAD regularly (the timeout interval is 5 minutes by default).

TERMINAL(config)#terminal timeout 255

4Configuration (Command Line Mode)

U-SYS IAD101H/102H/104H Integrated Access Device

Quick Start

8 Huawei Proprietary and Confidential

Issue 02 (2011-02-09)

Step 2 Configure the IP address of the IAD. There are three methods for obtaining the IP

address, that is, Static IP address, DHCP and PPPoE. By default, the IAD obtains an IP

address through DHCP automatically after being connected to the network. You can

choose another method for obtaining the IP address:

zRun ipaddress static ip-address subnet-mask default-gateway to set a fixed IP

address.

zRun ipaddress dhcp to obtain an IP address through DHCP. (A DHCP server is

required.)

zRun pppoe username user-name password password to set the PPPoE user name

and password, and then run ipaddress pppoe to obtain an IP address through

PPPoE. (A PPPoE server is required, and the user name and password need to be

set as the same as that on the PPPoE server.)

You can run display ipaddress to view the IP address of the IAD.

Changing the IP address may disconnect the Telnet connection. Then, you should establish

the Telnet connection again with the new IP address.

Step 3 Configure the SIP server.

Run sip server index address ip-address. The index is 0, and the IP address is

191.168.10.20.

TERMINAL(config)#sip server 0 address 191.168.10.20

If the prompt Failure: Execution of command failed! Please undo the

auto mode first appears, run undo sip server auto to cancel the automatic mode

of obtaining SIP server information, and set the IP address of the SIP server again.

You can set the index to 1 or 2 to configure backup SIP servers. The IAD registers to the

SIP server of index 0; if the registration fails, the IAD registers to the SIP servers of index

1 and 2 in sequence to ensure the normal running of the service.

Step 4 Configure the SIP user.

Run sip user port-number id id. The device port number is 0, and the user id is

88880008 (which should also be set on the SIP server; otherwise the user cannot

TERMINAL(config)#sip user 0 id 88880008

Run the display sip attribute port-number command to view the configuration result.

Step 5 (Optional) Synchronize the system time with the SNTP server, giving the log and alarm

records accurate time for reference.

Run sntp server address ip-address to set the IP address of a SNTP server, and then

run sntp interval <0-3600> to set the synchronization interval and run sntp time-zone

{+ <0-13> | - <1-12>} to set the time zone (for example, the Bejing time zone is +8,

run sntp time-zone + 8).

zYou can set the SNTP server to a PC on which the Windows Time service is

enabled. The PC must work continuously. To check whether the Window Time

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Huawei Tor Handbücher

Huawei

Huawei eA380 Bedienungsanleitung

Huawei

Huawei HG256 Bedienungsanleitung

Huawei

Huawei HG658 V2 Bedienerhandbuch

Huawei

Huawei HG659 Bedienungsanleitung

Huawei

Huawei Sunrise Internet Box 5G Bedienungsanleitung

Huawei

Huawei Pocket WiFi 3G Bedienungsanleitung

Huawei

Huawei B683 Technische Daten

Huawei

Huawei HG630 Technische Daten

Huawei

Huawei B890 Bedienungsanleitung

Huawei

Huawei B932 series Bedienungsanleitung

Huawei

Huawei EchoLife HG521 Bedienungsanleitung

Huawei

Huawei HG532D Bedienungsanleitung

Huawei

Huawei EchoLife BM635 WiMAX CPE Bedienungsanleitung

Huawei

Huawei E960 HSDPA Bedienungsanleitung

Huawei

Huawei EchoLife HG552a Bedienungsanleitung

Huawei

Huawei HG659 Bedienungsanleitung

Huawei

Huawei eSpace EGW1530B Bedienungsanleitung

Huawei

Huawei HG530 Bedienungsanleitung

Huawei

Huawei HG552e Bedienungsanleitung

Huawei

Huawei EchoLife HG531a Bedienungsanleitung

Huawei

Huawei HG658 Bedienungsanleitung

Huawei

Huawei SmartAX MA5603T Bedienungsanleitung

Huawei

Huawei HG523a Bedienungsanleitung

Huawei

Huawei RRU3808 V200 Bedienungsanleitung

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung

RTA

RTA 460MCBC-N2E Technisches Datenblatt