Huawei BTS3900 GSM Bedienungsanleitung
BTS3900 GSM
V300
Installation Guide
Issue 13
Date 2010-10-30
HUAWEI TECHNOLOGIES CO., LTD.
Copyright © Huawei Technologies Co., Ltd. 2010. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior written
consent of Huawei Technologies Co., Ltd.
Trademarks and Permissions
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the
customer. All or part of the products, services and features described in this document may not be within the
purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,
and recommendations in this document are provided "AS IS" without warranties, guarantees or representations
of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute the warranty of any kind, express or implied.
Huawei Technologies Co., Ltd.
Address: Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website: http://www.huawei.com
Email: [email protected]
Issue 13 (2010-10-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
i
About This Document
Purpose
This document describes installation of the BTS3900 cabinet, boards, modules, and cables. It
also provides checklists for hardware installation.
Product Versions
The following table lists the product versions related to this document.
Product Name Product Version
BTS3900 GSM V300R008
V300R009
V100R012
Intended Audience
lBase station installation engineers
Organization
1 Changes in the BTS3900 GSM Installation Guide
This chapter describes the changes in the BTS3900 GSM Installation Guide.
2 Preparing for Installation
This section describes the tools and meters that need to be available before the installation. It
also describes the skills and qualifications that the installation engineers must possess.
3 Information About the Installation
BTS3900 cabinets can be classified into -48 V cabinet, +24 V cabinet, and +220 V cabinet. You
need to familiarize yourself with the related information and clearance requirements before the
cabinet installation.
BTS3900 GSM
Installation Guide About This Document
Issue 13 (2010-10-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
iii
4 Unpacking the Equipment
You need to unpack and check the delivered equipment and ensure that all the materials are
included and intact.
5 Obtaining the ESN
The Electronic Serial Number (ESN) is a unique identifier of a Network Element (NE). The
ESN is used during the commissioning of a base station.
6 Installation Procedure
The BTS3900 cabinets are delivered with boards installed. The installation procedure on site
involves installing the base, installing the cabinet, and installing the cables. For the vehicle-
mounted cabinet, the base is not required, and the vibration isolators and dampers needs to be
installed. In addition, some optional components can be installed on site as required.
7 Checking the Installed Modules and Cables
The internal modules and cables are installed in the cabinet before delivery. You need to check
that the modules and cables are securely connected.
8 Installing the Vibration Isolators and Dampers
Four vibration isolators need to be installed at the bottom of the vehicle-mounted cabinet, and
two dampers need to be installed at the back of the cabinet.
9 Installing the Base
The BTS3900 cabinet must be installed on the base. The base can be installed on the concrete
floor or ESD floor according to the equipment room conditions and customer requirements.
10 Installing the Cabinet
The BTS3900 cabinets can be flexibly installed. In different scenarios, a single cabinet can be
separately installed and two cabinets can be installed side-by-side or stacked.
11 Installing the PGND Cable and Equipotential Cable
The equipotential PGND cable is used to connect the PGND bolts on the cabinets to the PGND
grounding bars on site, ensuring that the cabinets are properly grounded. The equipotential cable
is used to connect the PGND bolts on the cabinets, ensuring the equipotential connections
between the cabinets.
12 (Optional) Installing the Modules
The mandatory modules in the cabinet are already installed. The optional modules can be
installed on site according to different field requirements.
13 Installing the Cables
The BTS3900 cabinet is delivered with boards installed, and the internal cables are already
installed. Therefore, only the external cables and cables for the optional modules need to be
installed on site.
14 Installation Checklist
After the cabinets and devices are all installed, you need to check the installation items,
installation environment, and cable-related items.
15 Performing the Power-On Check
About This Document
BTS3900 GSM
Installation Guide
iv Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 13 (2010-10-30)
Before the cabinets are put into use, you need to check the power-on status of the cabinets.
Conventions
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol Description
Indicates a hazard with a high level of risk, which if not
avoided,will result in death or serious injury.
Indicates a hazard with a medium or low level of risk, which
if not avoided, could result in minor or moderate injury.
Indicates a potentially hazardous situation, which if not
avoided,could result in equipment damage, data loss,
performance degradation, or unexpected results.
Indicates a tip that may help you solve a problem or save
time.
Provides additional information to emphasize or supplement
important points of the main text.
General Conventions
The general conventions that may be found in this document are defined as follows.
Convention Description
Times New Roman Normal paragraphs are in Times New Roman.
Boldface Names of files, directories, folders, and users are in
boldface. For example, log in as user root.
Italic Book titles are in italics.
Courier New Examples of information displayed on the screen are in
Courier New.
Command Conventions
The command conventions that may be found in this document are defined as follows.
Convention Description
Boldface The keywords of a command line are in boldface.
Italic Command arguments are in italics.
BTS3900 GSM
Installation Guide About This Document
Issue 13 (2010-10-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
v
Convention Description
[ ] Items (keywords or arguments) in brackets [ ] are optional.
{ x | y | ... } Optional items are grouped in braces and separated by
vertical bars. One item is selected.
[ x | y | ... ] Optional items are grouped in brackets and separated by
vertical bars. One item is selected or no item is selected.
{ x | y | ... }*Optional items are grouped in braces and separated by
vertical bars. A minimum of one item or a maximum of all
items can be selected.
[ x | y | ... ]*Optional items are grouped in brackets and separated by
vertical bars. Several items or no item can be selected.
GUI Conventions
The GUI conventions that may be found in this document are defined as follows.
Convention Description
Boldface Buttons, menus, parameters, tabs, window, and dialog titles
are in boldface. For example, click OK.
>Multi-level menus are in boldface and separated by the ">"
signs. For example, choose File > Create > Folder.
Keyboard Operations
The keyboard operations that may be found in this document are defined as follows.
Format Description
Key Press the key. For example, press Enter and press Tab.
Key 1+Key 2 Press the keys concurrently. For example, pressing Ctrl+Alt
+A means the three keys should be pressed concurrently.
Key 1, Key 2 Press the keys in turn. For example, pressing Alt, A means
the two keys should be pressed in turn.
Mouse Operations
The mouse operations that may be found in this document are defined as follows.
About This Document
BTS3900 GSM
Installation Guide
vi Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 13 (2010-10-30)
Action Description
Click Select and release the primary mouse button without moving
the pointer.
Double-click Press the primary mouse button twice continuously and
quickly without moving the pointer.
Drag Press and hold the primary mouse button and move the
pointer to a certain position.
BTS3900 GSM
Installation Guide About This Document
Issue 13 (2010-10-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
vii
Andere Handbücher für BTS3900 GSM
2
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
Andere Huawei Netzwerk-Hardware Handbücher
Huawei
Huawei BTS3012 Bedienungsanleitung
Huawei
Huawei CR-C2CF Bedienungsanleitung
Huawei
Huawei FusionModule2000-S Bedienungsanleitung
Huawei
Huawei NE-HIC-2xSTM1/POS-SFP Bedienungsanleitung
Huawei
Huawei EchoLife EG8245H Bedienungsanleitung
Huawei
Huawei RTN510 Bedienungsanleitung
Huawei
Huawei CR52-POS/STM64 Bedienungsanleitung
Huawei
Huawei OptiX OSN 8800 T64 Bedienungsanleitung
Huawei
Huawei RT-NE20E-RPU-512M Bedienungsanleitung
Huawei
Huawei CR-P2HM Bedienungsanleitung
Huawei
Huawei SmartAX MA5800-X7 Bedienungsanleitung
Huawei
Huawei SUN2000-M3 Bedienungsanleitung
Huawei
Huawei EchoLife HS8245W1 Bedienungsanleitung
Huawei
Huawei NetCo 15000-C30 Leitfaden
Huawei
Huawei BBU3900 Bedienungsanleitung
Huawei
Huawei FusionDC1000A Bedienungsanleitung
Huawei
Huawei F01T100 Bedienungsanleitung
Huawei
Huawei EN83CTLA Bedienungsanleitung
Huawei
Huawei ST5110 Bedienungsanleitung
Huawei
Huawei RRU3908 V1 Bedienungsanleitung
Beliebte Netzwerk-Hardware Handbücher anderer Marken
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung
Yudor
Yudor YDS-16 Bedienungsanleitung
D-Link
D-Link ShareCenter DNS-320L Bedienungsanleitung
Samsung
Samsung ES1642dc Gebrauchsanweisung
Honeywell Home
Honeywell Home LTEM-PV Montageanleitung
