Huawei SmartAX MT882 Bedienungsanleitung

SmartAX MT882 ADSL Router

User Manual

HUAWEI TECHNOLOGIES CO., LTD.

SmartAX MT882 ADSL Router User Manual

Issue 03

Date 2008-03-19

No. 103098

Huawei Technologies Co., Ltd.

Address: Huawei Industrial Base

Bantian, Longgang

Shenzhen 518129

People's Republic of China

Website: http://www.huawei.com

Email: [email protected]

No part of this document may be reproduced or transmitted in any form or by

any means without prior written consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies

Co., Ltd.

All other trademarks and trade names mentioned in this document are the

property of their respective holders.

Notice

The information in this document is subject to change without notice. Every

effort has been made in the preparation of this document to ensure accuracy

of the contents, but all statements, information, and recommendations in this

document do not constitute the warranty of any kind, express or implied.

This product has been designed to comply with the requirements on

environmental protection. For the proper storage, use and disposal of this

product, national laws and regulations must be observed.

Safety Precautions

General Requirements:

zBefore you install and use the device, read these safety precautions

carefully and observe them during operation.

zDuring storage, transportation and operation of the device, keep the

device dry.

zDuring storage, transportation and operation of the device, avoid

collision and crash of the device.

zNever attempt to dismantle the device by yourself. In case of any

fault, contact the appointed maintenance center for repair.

zWithout prior written consent, no organization or individual is

permitted to make any change to the structure or safety design of

the device. Huawei Technologies Co., Ltd. is not liable to any

consequences or legal issues due to such changes.

zWhile using the device, observe all applicable laws, directives and

regulations, and respect the legal rights of other people.

Environmental Requirements:

zPlace the device at a well-ventilated place. Do not dispose the

device to direct sunlight.

zKeep the device clean and free of dusts.

zPlace the device on a stable platform.

zDo not place any object on top of the device. Otherwise, the device

may be too hot during operation. It can even be deformed or

damaged by the heavy load.

zKeep at least 10 cm between the device and the closest object for

heat dissipation.

zDo not place the device on or near any object that can easily catch

fire, such as something made of rubber.

zKeep the device far away from any heat source or bare fire, such as

a candle or an electric heater.

zKeep the device far away from any household appliance with strong

magnetic field or electromagnetic field, such as a microwave oven

or a refrigerator.

Operating Requirements:

zDo no let a child operate the device without guidance.

zDo not let a child play with the device or any accessory. Swallowing

the accessories may lead to peril.

zUse the accessories provided or authorized by the manufacturer

only.

zThe power supply of the device shall meet the requirements of the

input voltage of the device.

zBefore plugging or unplugging any cable, shut down the device and

disconnect it from the power supply.

zWhile plugging or unplugging any cable, make sure that your hands

are completely dry.

zDo not tread on, pull or over-bend any cable. Otherwise, the cable

may be damaged, leading to malfunction of the device.

zDo not use an old or a damaged power cable.

zDuring lightning weather, stop using the device and disconnect it

from the power supply. Unplug the power plug and the ADSL twisted

pair, to avoid lightning strike.

zIf the device is not used for a long time, disconnect it from the power

supply and unplug the power plug.

zIn any of the following cases, stop using the device, disconnect it

from the power supply and unplug the power plug immediately:

there is smoke emitted from the device, or there is some abnormal

noise or smell. Contact the specified maintenance center for repair.

zAvoid any object (such as metal shavings) from entering the device

from the heat dissipation intakes.

zDo not scratch or abrade the shell of the device. This may lead to

malfunctions of the device. The shed painting material may also

lead to skin allergy.

Cleaning Requirements:

zBefore cleaning the device, stop using it and disconnect it from the

power supply.

zUse a piece of soft cloth to clean the device.

zKeep the power plug clean and dry. Using a dirty or wet power plug

may lead to electric shock or other perils.

Table of Contents

Chapter 1 Introduction .....................................................................1

1.1 Functions and Features.........................................................1

1.2 Appearance...........................................................................1

1.2.1 Front Panel.................................................................2

1.2.2 Rear Panel..................................................................4

Chapter 2 Installation of the MT882................................................6

2.1 Preparation............................................................................6

2.2 Connecting the MT882..........................................................6

2.3 Setting Up the Configuration Environment............................8

2.3.1 Planning the Parameters............................................8

2.3.2 Operation....................................................................9

2.4 Web Setup Page.................................................................10

Chapter 3 Installation of the USB Driver ......................................11

3.1 Installing the USB Driver in Linux........................................11

3.2 Installing the USB Driver in MAC OS X...............................14

3.3 Installing the USB Driver in Windows Vista/XP/2K.............18

3.3.1 Installing the USB Driver in Windows System

Automatically .....................................................................18

3.3.2 Installing the USB Driver in Windows System Manually

...........................................................................................23

Chapter 4 Service Configuration...................................................28

4.1 Configuration Method..........................................................28

4.1.1 Protocol Model..........................................................28

4.1.2 Steps.........................................................................29

4.2 Service Modes of the MT882..............................................30

4.3 Configuring the Pure Bridge Mode......................................32

4.3.1 Preparation...............................................................32

4.3.2 Steps.........................................................................33

4.4 Configuring the PPPoE Mode.............................................34

4.4.1 Preparation...............................................................34

4.4.2 Steps.........................................................................35

4.5 Configuring the PPPoA Mode.............................................36

4.6 Configuring the RFC2684B Mode.......................................37

4.6.1 Preparation...............................................................37

4.6.2 Steps.........................................................................38

4.7 Configuring the RFC2684(IPoA) Mode...............................39

Chapter 5 Other Configurations....................................................40

5.1 TR069 Configuration...........................................................40

5.1.1 Configuration Parameters.........................................40

5.1.2 Save..........................................................................41

5.2 Changing the LAN IP Address............................................41

5.3 Changing the Administrator Password................................42

5.4 Restoring the Default Settings ............................................42

5.5 Firmware Upgrade...............................................................43

Chapter 6 Troubleshooting............................................................45

6.1 Fixing Common Problems...................................................45

6.2 FAQs ...................................................................................46

Chapter 7 Technical Specifications..............................................48

Chapter 8 Appendix........................................................................50

8.1 Default Settings...................................................................50

iii

8.1.1 Common Default Parameters...................................50

8.1.2 Default PVC Parameters ..........................................50

8.2 Acronyms and Abbreviations ..............................................51

Chapter 1 Introduction

This chapter describes the functions and the appearance of the

SmartAX MT882 ADSL Router (hereinafter referred to as the MT882).

1.1 Functions and Features

The MT882 is a type ofAsymmetric Digital Subscriber Line (ADSL)

terminal. Using the MT882 and a telephone line, you can enjoy data,

video and audio services at a high speed.

The features of the MT882 are:

zHigh transmission rate: The maximum downlink transmission

rate is 24 Mbit/s. The maximum uplink transmission rate is 1.2

Mbit/s.

zStrong network adaptability: The MT882 can interconnect

with multiple Digital Subscriber Line Access Multiplexers

(DSLAMs).

zStrong maintainability: The MT882 provides a number of

indicators, helping you to locate failures.

zEasy operation: The MT882 provides user-friendly interfaces

for configuration and management.

1.2 Appearance

This section describes the appearance of the MT882.

1.2.1 Front Panel

Figure 1-1 shows the front panel of the MT882.

Figure 1-1 Front panel of the MT882

Note:

The figure of the front panel is only for your reference.

Table 1-1 describes the indicators on the front panel.

Table 1-1 Indicators on the front panel

Indicator Status Description

Steady

green light The MT882 is powered on.

Power Off The MT882 is powered off.

Andere Handbücher für SmartAX MT882

Inhaltsverzeichnis

Andere Huawei Netzwerk-Router Handbücher

Huawei

Huawei e5180s Bedienungsanleitung

Huawei

Huawei Enterprise S2700 Series Bedienungsanleitung

Huawei

Huawei NetEngine 8000 F Montageanleitung

Huawei

Huawei EchoLife HG8247H Einrichtungshandbuch

Huawei

Huawei EG8147X6 Programmierhandbuch

Huawei

Huawei V200R001 Bedienungsanleitung

Huawei

Huawei S1700 Series Bedienungsanleitung

Huawei

Huawei NE20E-S2E Kurzanleitung

Huawei

Huawei EchoLife HG8240 Bedienungsanleitung

Huawei

Huawei SmartAX MT800 Bedienungsanleitung

Huawei

Huawei HW-01F Bedienungsanleitung

Huawei

Huawei E173 Bedienungsanleitung

Huawei

Huawei B618 Bedienungsanleitung

Huawei

Huawei S3026C-PWR Bedienungsanleitung

Huawei

Huawei WS8100 Bedienungsanleitung

Huawei

Huawei B525 Bedienungsanleitung

Huawei

Huawei M200 Technische Daten

Huawei

Huawei E5186 Bedienungsanleitung

Huawei

Huawei AR Series Bedienungsanleitung

Huawei

Huawei EchoLife EG8145V5 Bedienungsanleitung

Huawei

Huawei EchoLife BM625 WiMAX CPE Bedienungsanleitung

Huawei

Huawei LTE CPE B5338-168 Bedienungsanleitung

Huawei

Huawei SUN2000-25KTL-M5 Bedienungsanleitung

Huawei

Huawei Quidway S1700-8-AC Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise