Huawei HES-319M Bedienungsanleitung

Version: 1.1 Publication Date: 12-Apr–13

HES-319M Installation

HES-319M Installation 2

Revision History

Date

Version

Description of Changes

4-Feb-13

1.0

First release.

12-Apr-13

1.1

Updated the Rescanning for Base Stations topic to incorporate Tech Tool 1117.

Removed references to Uplink and Downlink Modulation parameters.

Removed WMI URLs and login credentials.

Contents

1. Overview.............................................................................................................................................. 4

2. Introduction to the HES-319M ............................................................................................................ 5

Comparison: HES-319M, BreezeMAX PRO 3000, BreezeMAX PRO 6000...........................................................5

HES-319M: As Shipped .......................................................................................................................................7

HES-319M ODU...................................................................................................................................................8

HES-319M ODU Signal Strength Indicators ........................................................................................................9

HES-319M IDU ..................................................................................................................................................10

Static IP Addresses............................................................................................................................................11

Base Station Restrictions ..................................................................................................................................12

3. Mounting the HES-319M ODU .......................................................................................................... 13

Other mounting options...................................................................................................................................16

4. Installing Cables and Grounds for the HES-319M ............................................................................. 17

Approved and Unacceptable Building Ground Points ......................................................................................19

Shaving the RJ-45 Connector Boot on the Cat5e PoE Cable.............................................................................20

Connecting the Surge Suppressor to the Building Ground...............................................................................21

Installing Cable & Ground from Surge Suppressor to ODU, Part 1...................................................................23

Installing Cable & Ground from Surge Suppressor to ODU, Part 2...................................................................26

Installing Cable from Surge Suppressor to IDU ................................................................................................28

Connecting to a Computer and Power .............................................................................................................30

HES-319M Installation 3

5. Aligning the HES-319M ...................................................................................................................... 31

Rescanning for Base Stations............................................................................................................................32

Quality of Installation Parameters....................................................................................................................34

Alignment and Acceptance...............................................................................................................................35

Identifying the Base Station..............................................................................................................................38

6. Connecting Your Customer’s Computer to the CPE .......................................................................... 39

HES-319M Installation 4

1. Overview

The HES-319M Installation guide provides material specific to the HES-319M for Installers of Xplornet WiMAX

services. It must be used in conjunction with the WiMAX Customer Premise Equipment Installation guide.

Refer to the WiMAX Customer Premise Installation guide for information on:

Preparing for a site visit

Performing a site survey

General mounting guidelines and requirements

Service activation

Quality of Installation tables

Safety standards

Refer to this guide for information on:

HES-319M components, interfaces, and indicators

HES-319M support for static IP addresses

HES-319M mounting instructions

HES-319M cabling and grounding

HES-319M alignment

Connecting your customer’s computer to the HES-319M

HES-319M Installation 5

2. Introduction to the HES-319M

Comparison: HES-319M, BreezeMAX PRO 3000, BreezeMAX PRO 6000

Because WiMAX is a regulated standard, manufacturers must conform to a strict set of specifications. As a

result, all WiMAX CPEs are quite similar and familiarity with one helps you when starting up with another.

The following table compares the BreezeMAX PRO 3000, BreezeMAX PRO 6000, and HES-319M to provide a

starting point for those familiar with the BreezeMAX PRO CPEs and new to the HES-319M.

Item

BreezeMAX PRO 3000

BreezeMAX PRO 6000

HES-319M

Static IP support

Yes

Yes, with firmware

01.00.12.999 or later

Base Station Support

Supported by all base

stations.

Supported by all base

stations.

On base stations

operating from

3475MHz to

3600MHz.

ODU Location

Requirements

The location requirements detailed in the

WiMAX Customer Premise Equipment Installation guide apply to all.

Mounting

Mount so sides are at 45° to

the horizontal.

Mount so sides are at 45° to

the horizontal.

Mount so top and

bottom are at 0° to

the horizontal, with

interface side on the

bottom.

Mounting Kit

Included

Cat5e Cables

Specialty cable with

integrated sealing gland

assembly from surge

suppressor to ODU.

Integrated sealing gland

assembly not required for

surge suppressor to IDU.

Cable with integrated

ground wire recommended

for surge suppressor to

ODU.

Stand-alone sealing gland

assembly.

Integrated ground wire not

required for surge

suppressor to IDU.

Same as BreezeMAX

PRO 6000

Ground wire (if not

integrated)

12AWG

HES-319M Installation 6

Item

BreezeMAX PRO 3000

BreezeMAX PRO 6000

HES-319M

Quality of Installation

(QoI) parameters

The same QoI parameters apply to all. Parameter values are determined

by the Program, the Channel Bandwidth, and the Rate Plan.

WMI Parameter for

QoI RSSI Level

RSSI

Signal Strength

WMI Parameter for

QoI CINR Level

CINR reuse 1

CINR

Link Quality

Display of

QoI Levels

WMI (CINR and RSSI)

LEDs at ODU (CINR)

Telephone tones (CINR)

WMI (CINR and RSSI)

LEDs at ODU (RSSI)

WMI (CINR and RSSI)

Activation

(Installer Portal)

The same for all except there is a firmware upgrade

process with the BreezeMAX PRO 3000.

HES-319M Installation 7

HES-319M: As Shipped

The HES-319M CPE is shipped in one box that contains:

The outdoor unit (A), or ODU, with sealing gland assembly (B)

The indoor unit (C), or IDU, with AC power cord (D)

A 6ft–1.8m Ethernet cable (E)

A mounting kit (F)

A grounding kit (G)

Contents may not appear exactly as shown.

HES-319M Installation 8

HES-319M ODU

The HES-319M ODU incorporates:

A modem for communications with the IDU

Data processing and management software

A high–gain antenna

A radio transmitter/receiver for communications with the base station

The ODU interfaces are:

RJ–45 port (A):

oSupports a 10/100 BaseT Ethernet communications link to the IDU

oIs a Power over Ethernet, or PoE, connection: the power to the ODU is supplied from the IDU over this

link

oWeather–sealed with the sealing gland assembly (B)

Signal Strength LEDS (C):

oFive LEDs indicate the strength of the signal received from the base station.

Refer to the next topic, HES-319M ODU Signal Strength Indicators, for details.

oWeather–sealed with the LED cap (D)

Ground screw (E): Used to connect the ODU to an approved building ground point.

The ODU can be located:

Up to 18mi–30km from the base station

Up to 328ft–100m from the customer’s computing equipment

HES-319M Installation 9

HES-319M ODU Signal Strength Indicators

The HES-319M ODU has LEDs that indicate the RSSI (Received Signal Strength Indicator) of the signal from the

base station. You use the signal strength indicators when you align the ODU; details are provided in the

chapter, Aligning the HES-319M.

Signal Strength (RSSI)

Signal Strength LEDs

≥ –50dBm

–60dBm to –50dBm

–70dBm to –60dBm

–80dBm to –70dBm

–90dBm to –80dBm

≤ –90dBm

HES-319M Installation 10

HES-319M IDU

The HES-319M IDU is a Power over Ethernet, or PoE, adapter that is powered from the AC mains. It provides

the communications interface between your customer’s computing equipment and the ODU, and supplies

power to the ODU.

The PoE adapter has two ports and three LEDs:

RJ–45 port labelled "OUT" (A):

oSupports a 10/100 BaseT Power over

Ethernet link to the ODU

oSends control signals to and receives

status indications from the ODU

oSupplies power to the ODU (B)

Be very careful to connect

ONLY the ODU to the OUT

port. The power destined

for the ODU can destroy

customer equipment in

milliseconds.

RJ–45 port labelled "IN" (C):

oSupports a 10/100 BaseT Ethernet link to

the customer's computing equipment (D).

Generally, the equipment is a computer

but may also be a LAN device such as a

router.

“CONNECT” LED (E): On when the PoE adapter

is powered up and connected to the ODU

“FAULT” LED (F): On when a fault condition

occurs.

If the condition does not clear itself in 30

seconds, unplug the PoE adapter for 10

seconds.

“ON” LED (G): On when the PoE adapter is

powered up

Operating specifications are:

–40°C to 65°C

10% to 90% humidity (non–condensing)

100VAC to 240VAC +/–10%

15W

Inhaltsverzeichnis

Andere Huawei Drahtloser Zugangspunkt Handbücher

Huawei

Huawei EchoLife HG8240 Bedienungsanleitung

Huawei

Huawei WA635SN-GN Bedienungsanleitung

Huawei

Huawei e5577s Bedienungsanleitung

Huawei

Huawei AP4050DN-E Betriebsanleitung

Huawei

Huawei ATN 905 Technische Daten

Huawei

Huawei AP4050DN-HD Technische Daten

Huawei

Huawei R250D Betriebsanleitung

Huawei

Huawei AP Series Bedienungsanleitung

Huawei

Huawei AP7052DN Betriebsanleitung

Huawei

Huawei AP4130DN Bedienungsanleitung

Huawei

Huawei AP3010DN-AGN Bedienungsanleitung

Huawei

Huawei Quidway WA1003A Bedienungsanleitung

Huawei

Huawei Quidway WA1003A Bedienungsanleitung

Huawei

Huawei 5G CPE WiN Bedienungsanleitung

Huawei

Huawei E5186 Bedienungsanleitung

Huawei

Huawei H352-381 Bedienungsanleitung

Huawei

Huawei Mobile WiFi E5878 Bedienungsanleitung

Huawei

Huawei B818-263 Technische Daten

Huawei

Huawei R250D-E Betriebsanleitung

Huawei

Huawei AP5030DN Technische Daten

Huawei

Huawei Quidway NE40E Leitfaden

Huawei

Huawei OptiXstar P622E Bedienungsanleitung

Huawei

Huawei OptiX RTN 310 Bedienungsanleitung

Huawei

Huawei AP7050DE Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung