Huawei AP6610DN-AGN-US Bedienungsanleitung

AP6610DN-AGN-US Outdoor Wireless LAN Access Point

Quick Start Guide

HUAWEI TECHNOLOGIES CO., LTD.

No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of

Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.

All other trademarks and trade names mentioned in this document are the property of their respective holders.

Notice

The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or

part of the products, services and features described in this document may not be within the purchase scope or the usage

scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are

provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied.

The information in this document is subject to change without notice. Every effort has been made in the preparation

of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document

do not constitute the warranty of any kind, express or implied.

Huawei Technologies Co., Ltd.

Address: Huawei Technologies Co., Ltd.

Bantian,Longgang

Shenzhen 518129

People’s Republic of China

Website: http://enterprise.huawei.com

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol Description

NOTE

CAUTION Indicates a potentially hazardous situation, which if not avoided, could

result in equipment damage, data loss, performance degradation, or

unexpected results.

Provides additional information to emphasize or supplement important

points of the main text.

Change History

Changes between document issues are cumulative. Therefore，the latest document issue contains all the changes in

previous issues.

Change in Issue 01 (2012-09-30)

Initial commercial release.

AP6610DN-AGN-US

Quick Start Guide

技术支持

Before performing Installation, confirm that the installation accessories and tools are available.

Installation tools: Technical Support

Installation

suite Expansion

bolt M4*12 hexagon

socket head cap

screw

Hoop

Installation accessories:

Device Overview

Packing List

Unpack the equipment. Ensure that all items listed in the package list are included in the shipment. If any item is missing,

contact the supplier.

Item Quantity Unit

AP device Fiber wrench（Optional）

PCS

Installation suite

1PCS

Network port connector

Ports and indicators

Item Description

No.

SYS

Wireless

SFP port

Default

AC power port

SYS status indicator.

Link

ETH port 5G antenna port

92.4G antenna port

Link status indicator.

Wireless status indicator.

Connected to fiber. An optical module is required.

Used for Ethernet connections.

Connected to an AC power module.

Connected to the feeder

Expansion bolt PCS

M4X12 hexagon socket head cap screw

PCS

Press and hold down the Reset button for 3 seconds

to restore the factory settings and restart the AP.

Item Description

No.

Product functions

Item Quantity Unit

PCS

Warranty card

Certificate of Conformance

Hoop

71PCS

Quick Start Guide (including the

printed packing list)

81PCS

9Toxic or Hazardous Substance &

Elements Declaration 1PCS

12354 6

8 899

Phillips

screwdriver Hammer

Maker

Flat-head

screwdriver Diagonal

pliers Adjustable

wrench

ESD

gloves COAX

crimping tool Measuring

tape

Wire

stripper RJ45

Crimping tool Multimeter

Level

Vacuum

cleaner Network

cable tester

Hammer

drill

Hex key

6mm drill

bit

No. No.

Huawei Technologies Co., Ltd.

Address: Huawei Industrial Base

Bantian,Longgang

Shenzhen 518129

People’s Republic of China

Website: http://enterprise.huawei.com

Installing an AP

●Select an appropriate installation position and leave space above and around the device for cooling air circulation.

●Outdoors Aps are used for hotspot coverage and often installed against walls or poles. The pole diameter is 48 mm to 114 mm.

AP6610DN-AGN-US dimensions (unit: mm) without a backplane

support. Recommended AP6610DN-AGN-US installation space

(unit: mm).

●Installing the AP6610DN-AGN-US against a Wall:

330 83

306

Hexagon

socket head

cap screw

Field strength

场强示意

1. Fix the wall-mounting bracket to the wall, adjust the

installation position, and use the marker, level, and

measuring tape to mark the drilling positions where

expansion bolts are installed.

2. Use #8 drill bit to drill 35 mm to 40 mm deep holes in the

drilling positions and install expansion bolts. Screw the nut

into the expansion tube, hammer the expansion bolt into a

hole until the flat washer is flattened against the wall, and

remove the nuts, spring washer, and flat washer in order.

Flat washer

Spring washer

Nuts

3. Use four M4*12 hexagon socket head cap screws to fasten the wall-mounting bracket to the AP.

4. Pinch the wall-mounting bracket on the expansion

bolts, and fasten the flat washer, spring washer, and

nuts in order.

5. Slide the AP into the wall-mounting bracket to complete

installation.

64mm

37mm

Installing an AP

上电调试

●Installing the AP6610DN-AGN-US against a vertical pole:

Field strength

场强示意

NOTE

Lock hole

Security

lock

1. Determine the AP installation position, slide the hoop

through the hole of the wall-mounting bracket and attach

it to the pole, and use the screwdriver to secure screws

on the hoop.

2. Slide the AP that has the connector fastened into the wall-

mounting bracket.

●The procedure for installing the AP6610DN-AGN-US against a horizontal pole is similar to the procedure for installing the

AP6610DN-AGN-US against a vertical pole.

●Installing the Security Lock

To prevent unauthorized personnel from moving the AP, lock the AP. The preceding figure shows the security lock. The

carrier should purchase the security lock and determine the position for installing the security lock.

Installing Cables

Ground cable

Optical fiber

AC power cable

●AP6610DN-AGN-US external cable arrangement drawing

Feed line Feed line

Feed line

●Connecting the feed line

1. The outdoor AP's antenna ports already have 5 KA surge protection capability. Generally, no surge protection devices

need to be installed; therefore, the antenna cables are directly connected to the AP's antenna ports.

2. If higher surge protection capability is required, the customer can purchase a surge protection device. When installing the

surge protection device, ensure that it is connected to a ground cable.

Waterproof adhesive tape

Ground cable

NOTE

Surge

protection

device

Waterproof

adhesive

tape

Feed line

●When no antenna is installed on the 5G antenna interface, cover the interface with a dustproof cap and wrap the

dustproof cap with insulating tape and waterproof tape.

●Wrap the feed line using one-layer PVC black insulation tape, three-layer waterproof adhesive tape, and then three-layer

PVC black insulation tape.

●Stretch the waterproof adhesive tape evenly and ensure that the upper layer of the tap overlaps 1/2 of the lower layer.

Each layer should be attached tightly.

●Wrap the three-layer waterproof adhesive tape from bottom to up, from up to bottom, and from bottom to up in order.

Installing Cables

bcdef

2. The optical fiber connection of AP6610DN-AGN-US is similar to that of WA653SN. Here, WA653SN is used as an

example. Connect the optical fiber to the AP and ensure that the waterproof connector is fastened.

CAUTION

●Connecting optical fibers

1. The right figure shows the appearance of the optical fiber：

The thread must be secured properly; otherwise, optical fibers may be damaged. When removing optical fibers, remove the

waterproof PG connector, and then remove the optical fiber connected to the AP. When removing the waterproof PG

connector, use the ejector lever to clutch the optical fiber tube. This prevents the optical fiber tube from rotating with the

waterproof PG connector and protects optical fibers.

NOTE

Install an optical module as shown in step a

before connecting the fiber.

abc d e f

Figure 2

Figure 1

●Connecting AC power cables

1. Make an AC power cable onsite, cut the cable of proper length. Make a cable according to figure 1. L/N/PE pin

arrangement must be correct.

2. When connecting the AC power cable to the AP, align the socket to the red point of the connector, and insert the

waterproof connector. When a crack sound is heard, the AC power cable is installed properly. When removing the AC

power cable, press the component with the red point. You do not need loosen the screw.

●Making AC Power Cables Onsite

a Preparation

1. The required tools are as follows: open-end wrench

(22mmX24mm), open-end wrench (22mmX24mm), Phillips

screwdriver (0#X50mm), diagonal pliers, and utility knife. NutSocketScrewShell

CAUTION

b Connection

1. Use cable ties to fasten the cable, remove the socket

and nut together, and then lead the cable through the socket

and nut.

Cable tie

Wiring

terminal Cable

Be careful when striping the cable, please don't damage

the Core wire and the Conductor.

2. Strip the cable.

Core wire Conductor

2. The following table shows the connector components.

Installing Cables

3. Install the core wires in the correct holes.

After the screws are tightened, check that the cable is

securely installed by evenly pulling the cable with a 10 kg

force.

4. Tighten the screws in the three holes using a Phillips

screwdriver.

CAUTION

5. Tighten the Socket and Shell using hand until you can't

see the red color band.

Red color band Nut

6. Pre-tighten the nut and socket, and then further tighten

the nut using a wrench with a torque of more than

1.2N·m。

Wrench specifications:22

Before tightened the socket and shell, the cable can't be

tightened by the nut.

CAUTION CAUTION

Please be careful not to damage the surface coating of

parts when tightening the nut and socket.

c Verification

Use a multimeter to test the reliability of the cable

components.

●Connector jacks can't be short-circuited.

●Connections between the metal shell and the connector jacks

can't be short-circuited.

●Cable core wires are connected properly to the corresponding

connector jacks.

d Protection

The device is placed outdoors, warp up the connector using three layers of PVC insulation tapes to prevent it from being

damaged, as shown in the following figure.

CAUTION

●Each radio connector must be wrapped by three layers of waterproof tape and three layers of insulating tape.

●Wrap the tape from bottom to top, from top to bottom, and then from bottom to top. Cut the tape after wrapping three

layers of tape on the connector.

●Wrap each layer of tape tightly and ensure that each layer covers more than 50% of the layer below it.

●Before wrapping the waterproof tape, stretch the tape evenly until the tape turns 1/2 as wide as before.

●After wrapping the tape, bundle cable ties at both ends of the insulating tape to prevent aging of the tape.

NOTE

Installing Cables

Connecting the ground

bar

●Connecting the ground cable

Cut the cable of proper length, and select 6-M4 OT terminal for the AP and 6-M6 OT terminal for the ground bar.

Requirements for laying out ground cables:

1. All ground cables must be connected to a ground bar.

2. The ground cable cannot be led in aerially, but buried in the earth or arranged indoor.

3. Both ends of the external conductor of the coaxial cable and those of the insulation of the shielded cable should

have good electric contact with the metal shell of the equipment they connect to.

4. Ground cables must be separated from signal cables to reduce interference between them.

5. Do not add any switch or fuse on the ground cable.

6. Do not use another device for an electrical connection with the ground cable.

7. All metal components in the shell must be securely connected to the ground cable.

Keep the screw properly and install it again after pressing the Reset button.

CAUTION

●Pressing the Reset Button

The Reset button on an outdoor AP is protected by a waterproof screw. Before pressing the Reset button, remove the

waterproof screw.

CAUTION

Inhaltsverzeichnis

Andere Huawei Drahtloser Zugangspunkt Handbücher

Huawei

Huawei AP6010DN-AGN Bedienungsanleitung

Huawei

Huawei U-SYS IAD208E Bedienungsanleitung

Huawei

Huawei eAN3810A Handbuch

Huawei

Huawei AP4050DN-E Technische Daten

Huawei

Huawei WA603DE Bedienungsanleitung

Huawei

Huawei AP4050DN-E Betriebsanleitung

Huawei

Huawei AP8082DN Betriebsanleitung

Huawei

Huawei AP6510DN-AGN Bedienungsanleitung

Huawei

Huawei AP4130DN Bedienungsanleitung

Huawei

Huawei UA5000 Bedienungsanleitung

Huawei

Huawei eA660 Series Bedienungsanleitung

Huawei

Huawei H352-381 Bedienungsanleitung

Huawei

Huawei E5186 Bedienungsanleitung

Huawei

Huawei AP6510DN-AGN-US Bedienungsanleitung

Huawei

Huawei E5573S Bedienungsanleitung

Huawei

Huawei Quidway WA1003A Bedienungsanleitung

Huawei

Huawei B818-263 Technische Daten

Huawei

Huawei AP4030DN Bedienungsanleitung

Huawei

Huawei PT530 Bedienungsanleitung

Huawei

Huawei EG860 Series Bedienungsanleitung

Huawei

Huawei B2338-168ODU Bedienungsanleitung

Huawei

Huawei AP7052DN Betriebsanleitung

Huawei

Huawei Mobile WiFi E5878 Bedienungsanleitung

Huawei

Huawei OptiXstar P602E Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung