Huawei EM770W Bedienungsanleitung

AT Command Interface Specification

EM770W UMTS M2M Wireless Module

V100R001

Issue 18

Date 2009-28-07

HUAWEI TECHNOLOGIES CO., LTD

Distributed by

Maxon Electronics Australia Pty. Ltd. is proud to distribute the Huawei HSUPA Mini PCI Module EM-

770W built to Maxon's specications.

In keeping with Maxon's dedicated customer support policy, we encourage you to contact us.

TECHNICAL:

Hours of Operation : Monday to Friday 8.30am to 5.30pm*

Telephone: +61 2 8707 3000

Facsimile: +61 2 8707 3001

Email: [email protected]

* Public holidays excluded

SALES:

Hours of Operation: Monday to Friday 8.30am to 5.30pm*

Telephone: +61 2 8707 3000

Facsimile: +61 2 8707 3001

Email: [email protected]

* Public holidays excluded

WEBSITE: www.maxon.com.au

Maxon has also added for the benet of developers and integrators, a forum on our website that can be

accessed to discuss this product and/or technical matters in relation to your applications. All questions

raised within this portal will be answered.

FORUM: www.maxon.com.au/forum

ADDRESS:

Maxon Electronics Australia Pty Ltd

36a Gibson Avenue, Padstow

Sydney, NSW, Australia 2211

POSTAL ADDRESS

Maxon Electronics Australia Pty Ltd

Po Box 1, Revesby North,

Sydney, NSW Australia 2212

EM770W UMTS M2M Wireless Module

RF EXPOSURE &

ELECTRICAL SAFETY COMPLIANCE

AT Commands

The use of this device in any other type of host conguration may not comply with the RF exposure

requirements and should be avoided. During operation, a 20 cm separation distance should be

maintained between the antenna, whether extended or retracted, and the user’s/bystander’s body

(excluding hands, wrists, feet, and ankles) to ensure RF exposure compliance. The modem is not

designed for, nor intended to be, used in applications within 20 cm (8 inches) of the body of the user.

Continued compliance of the equipment relies upon it being used with an AS/NZS 60950.1 approved

SELV power supply.

CAUTION

Change or modication without the express consent of Maxon Electronics Australia Pty. Ltd. voids the

user’s authority to use the equipment. These limits are designed to provide reasonable protection

against harmful interference in an appropriate installation. The modem is a transmitting device with

similar output power to a mobile phone. This equipment generates, uses, and can radiate radio

frequency energy and, if not used in accordance with instructions, can cause harmful radiation to

radio communication. Use only the supplied or an approved antenna. Unauthorized antennas, modi-

cations, or attachments could impair call quality, damage the device, or result in violation of RF

exposure regulations.

However, there is no guarantee that interference will not occur in a particular installation. If the

equipment does cause harmful interference in radio and television reception, which can be deter-

mined by turning the equipment on and o, the user is encouraged to try to correct the interference

by one or more of the following measures:

tRe-orient or relocate the receiving radio or TV antenna

tIncrease the separation distance between the equipment and the receiver

tContact Maxon Australia Technical Support for assistance.

EM770W UMTS M2M Wireless Module

AT Commands

General Safety

RF Interference Issues

Avoid possible radio frequency (RF) interference by carefully following the safety guidelines below.

t4XJUDI0''UIF.PEFNXIFOJOBOBJSDSBGU5IFVTFPGDFMMVMBSUFMFQIPOFTJOBJSDSBGUJTJMMFHBM*UNBZ

endanger the operation of the aircraft and/or disrupt the cellular network. Failure to observe this

JOTUSVDUJPONBZMFBEUPTVTQFOTJPOPSEFOJBMPGDFMMVMBSTFSWJDFTUPUIFPòFOEFSMFHBMBDUJPOPSCPUI

t4XJUDI0''UIF.PEFNJOUIFWJDJOJUZPGHBTPMJOFPSEJFTFMGVFMQVNQTPSCFGPSFöMMJOHBWFIJDMFXJUI

fuel.

t4XJUDI0''UIF.PEFNJOIPTQJUBMTBOEBOZPUIFSQMBDFXIFSFNFEJDBMFRVJQNFOUNBZCFJOVTF

t3FTQFDUSFTUSJDUJPOTPOUIFVTFPGSBEJPFRVJQNFOUJOGVFMEFQPUTDIFNJDBMQMBOUTPSJOBSFBTPG

blasting operations.

t5IFSFNBZCFBIB[BSEBTTPDJBUFEXJUIUIFPQFSBUJPOPGZPVS.PEFNJOUIFWJDJOJUZPGJOBEFRVBUFMZ

QSPUFDUFEQFSTPOBMNFEJDBMEFWJDFTTVDIBTIFBSJOHBJETBOEQBDFNBLFST1MFBTFDPOTVMUUIFNBOV-

GBDUVSFSTPGUIFNFEJDBMEFWJDFUPEFUFSNJOFJGJUJTBEFRVBUFMZQSPUFDUFE

t0QFSBUJPOPGUIF.PEFNJOUIFWJDJOJUZPGPUIFSFMFDUSPOJDFRVJQNFOUNBZDBVTFJOUFSGFSFODFJGUIF

FRVJQNFOUJTJOBEFRVBUFMZQSPUFDUFE0CTFSWFBOZXBSOJOHTJHOTBOENBOVGBDUVSFSTSFDPNNFOEB-

tions.

t5IFNPEFNDPOUBJOTTFOTJUJWFFMFDUSPOJDDJSDVJUSZ%POPUFYQPTFUIFNPEFNUPBOZMJRVJETIJHI

UFNQFSBUVSFTPSTIPDL5IFNPEFNJTOPUXBUFSQSPPG1MFBTFLFFQJUESZBOETUPSFJUJOBDPPMESZ

place.

t0OMZVTFPSJHJOBMBDDFTTPSJFTPSBDDFTTPSJFTUIBUBSFBVUIPSJ[FECZUIFNBOVGBDUVSFS6TJOHVOBV-

UIPSJ[FEBDDFTTPSJFTNBZBòFDUZPVSNPEFNTQFSGPSNBODFEBNBHFZPVSNPEFNBOEWJPMBUFSFMBUFE

national regulations.

t"MXBZTIBOEMFUIFNPEFNXJUIDBSF5IFSFBSFOPVTFSTFSWJDFBCMFQBSUTJOTJEFUIFNPEFN6OBV-

UIPSJTFEEJTNBOUMJOHPSSFQBJSPGUIFNPEFNXJMMWPJEUIFXBSSBOUZ

Vehicle Safety

t%POPUVTFUIF.PEFNXIJMFESJWJOH

t3FTQFDUOBUJPOBMSFHVMBUJPOTPOUIFVTFPGDFMMVMBSUFMFQIPOFTJOWFIJDMFT3PBETBGFUZBMXBZTDPNFT

öSTU

t*GJODPSSFDUMZJOTUBMMFEJOBWFIJDMFUIFPQFSBUJPOPGUIF.PEFNDPVMEJOUFSGFSFXJUIUIFDPSSFDU

GVODUJPOJOHPGWFIJDMFFMFDUSPOJDT5PBWPJETVDIQSPCMFNTCFTVSFUIBUUIFJOTUBMMBUJPOIBTCFFO

QFSGPSNFECZRVBMJöFEQFSTPOOFM

7FSJöDBUJPOPGUIFQSPUFDUJPOPGWFIJDMFFMFDUSPOJDTTIPVMECFQBSUPGUIFJOTUBMMBUJPO

Safety Notice:

EM770W UMTS M2M Wireless Module

AT Commands

NOTES

The user is cautioned that changes or modications not expressly approved by Maxon

Australia could void the warrantee.

POTENTIALLY UNSAFE AREAS

Posted facilities: Turn o this device in any facility or area when posted notices require

you to do so.

Blasting areas: Turn o your device where blasting is in progress. Observe restrictions

and follow any regulations or rules.

Potentially explosive atmospheres: Turn o your device when you are in any area with

a potentially explosive atmosphere. Obey all signs and instructions. Sparks in such

areas could cause an explosion or re, resulting in bodily injury or death.

Areas with a potentially explosive atmosphere are often but not always clearly marked.

They include:

tGVFMMJOHBSFBTTVDIBTHBTPSQFUSPMTUBUJPOT

t#FMPXEFDLPOCPBUT

t5SBOTGFSPSTUPSBHFGBDJMJUJFTGPSGVFMPSDIFNJDBMT

t7FIJDMFTVTJOHMJRVFöFEQFUSPMFVNHBTTVDIBTQSPQBOFPSCVUBOF

t"SFBTXIFOUIFBJSDPOUBJOTDIFNJDBMTPSQBSUJDMFTTVDIBTHSBJOEVTUPSNFUBM

powders

t"WPJEVTJOHUIFNPEFNJOBSFBTUIBUFNJUFMFDUSPNBHOFUJDXBWFTPSFODMPTFE

metallic structures e.g. lifts.

t"OZPUIFSBSFBXIFSFZPVXPVMEOPSNBMMZCFBEWJTFEUPUVSOPòZPVSFOHJOF

HUAWEI UMTS M2M Module V100R001

AT Command Interface Specification

Issue 18 (2009-06-22) Commercial in Confidence Page 3 of 169

About This Document

Author

Prepared by Yuan Kangqiang, Zhu Di,

Dongwenhao, Ma Zhaoyang,

Yang Pu, Xing Jishan

Date 2008-10-22

Reviewed by Cao Hepu, Liu Kun, Pei Na,

Yuan Kangqiang, Zhu Di,

Dongwenhao, Ma Zhaoyang,

Yang Pu, Xing Jishan

Date 2009-06-22

Approved by Yang Jie Date 2009-06-22

Summary

Keywords: UMTS, Module, WCDMA, GPRS, GSM

Abstract: This Document describes the AT command-based communication interface

between TE and MS of Huawei UMTS Module. The interface can implement the

functions such as voice call, SMS, telephone service, supplementary service, TCP,

UDP and network setting.

This document includes:

Chapter Details

1 Scope Describes interface design principles and change

principles

2 Interface Introduction Describes interface simply

3 Query of Basic Information

and Description of Set

Interface

Describes AT command of basic information

querying and setting

4 SMS Interface Description Describes AT command of SMS

5 Description of Security

Setting Interface

Describes AT command of security setting

HUAWEI UMTS M2M Module V100R001

AT Command Interface Specification

Issue 18 (2009-06-22) Commercial in Confidence Page 4 of 169

6 System Setting Interface

Description

Describes AT command of system setting

7 Phonebook Service

Interface Description

Describes AT command of phonebook service

8 Network Service Interface

Description

Describes AT command of network service

9 Data Service Interface

Description

Describes AT command of data service

10 TCP/UDP Service

Interface Description

Describes AT command of TCPUDP service

11 Voicemail Service

Interface Description

Describes AT command of voicemail service

12 Overall Design Constraints Describes overall design constraints

13 Software Quality Attributes Describes software quality attributes

14 Dependencies Describes dependencies

15 Feasibility Analysis Describes feasibility analysis

16 Issues To Be Determined Describes issues to be determined

17 Appendixes Appendixes

HUAWEI UMTS M2M Module V100R001

AT Command Interface Specification

Issue 18 (2009-06-22) Commercial in Confidence Page 5 of 169

History

Issue Details Date Author Approved by

01 Creation 2008-10-22 Yuankangqiang Yang Jie

02 Modify IP STACK

commands 2008-12-09 Zhu Di Yuankangqiang

03 Add %IPENTRANS

command 2008-12-20 Zhu Di Yuankangqiang

04 Add %NWINFO,

%RESET,

%AUTORESET,

%IPCHOSTPN,

%IPCFL, %IPCTRIP

and STK commands

2009-01-10 Zhu Di Yuankangqiang

05 1. Add &W, Z, &F,

+MMC,

%IPCGDCONT,

%IPQCPDPP

commands

2. Modify +CNMI

%NWINFO command

2009-01-23 Yang Pu Zhu Di

06 1.Modify &W, Z, &F

commands

2.Add %rssi command

2009-02-21 Xing Jishan Zhu Di

07 1.Add AT+MMC

command

2.Modify %IPQCPDPP

command

2009-02-26 Yang Pu Zhu Di

08 Modify &W command 2009-03-04 DongWenhao Zhu Di

09 1.Modify %CONINFO

command

2.Add %IPCUTOCON

command

2009-03-12 Zhu Di Yuankangqiang

10 1.Add +ICF command

2.Modify &C command 2009-03-25 Zhu Di Yuankangqiang

11 Add AT%IPNOTIF

command 2009-04-03 Zhu Di Yuankangqiang

HUAWEI UMTS M2M Module V100R001

AT Command Interface Specification

Issue 18 (2009-06-22) Commercial in Confidence Page 6 of 169

Issue Details Date Author Approved by

12 1.Modify &F command

2.Modify %IPCFL

command

3.Modify %IPNOTIF

command

4.Modify %NWINFO

and %RSSI commands

for RSCP and RSSI

explanations.

2009-04-15 DongWenhao Zhu Di

13 1.Modify %IPQCPDPP

command

2.Modify %IPCFL

command

3.Add +CNMI=1,5

command

4.Modify %SYSCFG

command

5.Modify %NWINFO

command

2009-04-29 DongWenhao Zhu Di

14 Add +IFC command 2009-05-12 Zhu Di Yuankangqiang

15 1.Add Remote SMS

Interface Description

2.Add %SLEEPMODE

command Description

2009-05-22 MaZhaoyang Yuankangqiang

16 Add %AUTODELSMS

command Description 2009-05-27 Zhu Di Yuankangqiang

17 Add +IPR command

Description 2009-06-02 MaZhaoyang Yuankangqiang

18 Modify %IPCLOSE

command Description

2009-06-20 MaZhaoyang Yuankangqiang

Andere Handbücher für EM770W

Inhaltsverzeichnis

Andere Huawei Drahtlosmodul Handbücher

Huawei

Huawei eLTE-IoT Series Bedienungsanleitung

Huawei

Huawei 02312DHF Bedienungsanleitung

Huawei

Huawei EM701 Bedienungsanleitung

Beliebte Drahtlosmodul Handbücher anderer Marken

Laird

Laird RM024 Bedienungsanleitung

Laird

Laird BT830-SA Kurzanleitung zur Einrichtung

Ebyte

Ebyte E49-400T20S Bedienungsanleitung

Fibocom

Fibocom FM101-NA-20 Montageanleitung

Waldmann

Waldmann EnOcean TALK MODUL G2 Bedienungsanleitung

Smartech

Smartech LBT-1.DO4 Bedienungsanleitung

Cooper Wiring Devices

Cooper Wiring Devices ESPIRE RF RFAPM Bedienungsanleitung

Yuga

Yuga CLM920 Bedienungsanleitung

Waldmann

Waldmann TALK Bluetooth Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions UC864-G Installationshandbuch

Ebyte

Ebyte E07-900M10S Bedienungsanleitung

Quectel

Quectel SC690A Series Beilage

Panasonic

Panasonic INDUSTRY PAN9028 Kurzanleitung zur Einrichtung

Ebyte

Ebyte E70-433NW30S Bedienungsanleitung

LongSung Technology

LongSung Technology U9507E Bedienungsanleitung

Wistron NeWeb

Wistron NeWeb DNUR-S2 Bedienungsanleitung

Ebyte

Ebyte E49-400M20S4 Bedienungsanleitung

RF-Star

RF-Star SimpleLink RF-BM-2652P1 CC2652P Bedienungsanleitung