Huawei E8278 Montageanleitung

FOR MORE INFORMATION

VISIT telstra.com/ppmbb

VISIT A TELSTRA STORE OR PARTNER

GETTING TO

KNOW YOUR

TELSTRA

PRE-PAId

4G USB + WI-FI

WHAT’S

INSIdE

03 Safety first

06 Let’s get started

11 Getting connected

17 Managing your Pre-Paid Service

20 There are heaps of ways to recharge

23 International roaming

25 Wi-Fi home page

33 Extra features

35 Problem solving

39 Extra bits you should know

40 Terms and conditions

LET’S GET THIS SHOW

ON THE ROAd

You must be excited about your brand new Telstra Pre-Paid

4G USB + Wi-Fi.

This guide will help you get connected as quickly and as

easily as possible. It’ll guide you through installation and

run through all the handy extra features that are included.

If all goes to plan you’ll be up and running in no time,

so you can get connected whilst on the move.

SAFETY

FIRST

Please read all the safety notices before using this device.

This device is designed to be used at least 20 cm from

your body. Do not use the device near fuel or chemicals or

in any prescribed area such as service stations, refineries,

hospitals and aircraft. Obey all warning signs where posted.

RAdIO FREQUENCY SAFETY INFORMATION

The device has an internal antenna. For optimum

performance with minimum power consumption do not

shield the device or cover with any object. Covering the

antenna affects signal quality, may cause the router to

operate at a higher power level than needed, and may

shorten battery life.

RAdIO FREQUENCY ENERGY

Your wireless device is a low-power radio transmitter and

receiver. When switched on it intermittently transmits radio

frequency (RF) energy (radio waves). The transmit power

level is optimised for best performance and automatically

reduces when there is good quality reception. Maximum

power is only used at the edge of network coverage so

under most circumstances the power output is very low.

Under poor network conditions the device transmits at a

higher power, may get hot and have a significantly shorter

battery life.

dECLARATION OF CONFORMITY –

SPECIFIC ABSORPTION RATE (SAR)

The wireless device is designed to be used at least 20 cm

from the body. We declare that the product detailed in

this manual, and in combination with our accessories,

conform with the essential requirements of The Radio

N14036

3 4

IMPORTANT: SECURITY SETTINGS SSId

ANd WI-FI SECURITY KEY (WPA2 KEY)

• The default security settings are unique for your device

and are provided on the Wi-Fi security card. Please keep

this card in a safe place.

• The security key is case sensitive and should be entered

exactly as it is written on the card. Your Wi-Fi security key

(WPA2 key) is also on the device.

• You can change the SSID and security key to your

own preferences. See page 21 for ways to modify your

settings from the Wi-Fi home page.

• You need this information to log on and use the device.

QUICK REFERENCE SECTION

Wi-Fi home page http://m.home

Wi-Fi home page

username

password

admin

Default SSID

(Wi-Fi network name)

Telstraxxxxxx

Default Security Key Supplied on your security card.

All characters are case sensitive.

Restore Defaults Hold down Reset button located under the

back cover, next to SIM card tray for five

seconds using a pen tip or pin. Your device

must be plugged into a power source.

7 8

YOUR TELSTRA PRE-PAId

4G USB + WI-FI

LED Indicators

The LED lights indicate your network connectivity and Wi-Fi

status. Both LED’s will flash when you are transferring data.

Network Indicator Modem Status

Green blinking Powered on

Green blinking rapidly Firmware upgrade in progress

Blue blinking Registered to 3G network

Blue solid Connected to 3G network

Cyan blinking Registered to 4G network

Cyan solid Connected to 4G network

No LED 4G Mobile Wi-Fi Smart is powered off

Wi-Fi Indicator Modem Status

Green Solid Wi-Fi connection is set up

No LED Wi-Fi function is turned off or fails,

or is powered off

Message Indicator Modem Status

Green solid Unread message

Green blinking Message storage is full

No LED All messages have been read, message

box is not full or device is powered off

910

USB Connector

Message IndicatorExternal Antenna Port 2

Wi-Fi Indicator

Network Indicator

microSD card slot

External Antenna Port 1

GETTING

CONNECTEd

1. INSERT SIM CARd

• Your SIM card should already be inside the device. Check

to make sure. To remove top cover gently slide up to open.

• To Insert the SIM card, slide in as shown

with the gold chip facing down. Replace cover.

2. SETTING UP YOUR dEVICE

You can connect to the internet in two ways:

USB Set Up

• Insert USB into USB port on your PC or other device.

Reset

xxxxxxxxxxxxxx

Reset

xxxxxxxxxxxxxx

Reset

xxxxxxxxxxxxxx

11 12

Reset

xxxxxxxxxxxxxx

• The Setup Wizard will run automatically and after

a couple of minutes a new desktop icon called Telstra

Pre-Paid 4G USB+Wi-Fi will be installed.

• You can double click on the icon or open a browser and

type in http://m.home to manage your connection settings

if required.

If the Setup Wizard doesn’t start automatically then select

Computer from your Desktop or Start Menu. Select the file

AutoRun.exe and follow the prompts.

You are now ready to activate your SIM card.

Wi-Fi Set Up

• Ensure the USB is plugged into a power source such as a

PC or AC adapter.

• Check your computer or other device has Wi-Fi enabled

and search for wireless networks. Refer to your Wi-Fi

enabled device manual for further details on searching

for wireless networks.

13 14

• Select the SSID (Wi-Fi network name) displayed on your

security card. This is also printed on the device under the

top cover. Then click connect.

• Enter default security key exactly as shown on the included

security card. Note your security key is case sensitive.

You can modify your settings via the Wi-Fi home page

at http://m.home

For more information on the Wi-Fi home page see

pages 25-30.

Important: The USB must be plugged into a power source

such as a PC or AC adapter included in the box to operate.

3. ACTIVATE YOUR SIM CARd

• Activate your SIM card online via telstra.com/activate

You can also activate your SIM via the Wi-Fi homepage

by selecting Account Services.

• You’ll need your new service number (you’ll find this on

the packaging) and your personal ID details (e.g. drivers

license, passport, etc).

• Follow the instructions to get your device online as easily

as possible.

• If you have any issues activating you can contact our

support centre on 125 8880 or from a non-Telstra phone

call 13 2200 and say “Pre-Paid”.

4. ENdING YOUR SESSION

• To disconnect, unplug your device from the power

source or disable your Wi-Fi connection from your

Wi-Fi enabled device.

15 16

There are a few ways to help you manage your account.

These include Device Online, My Account and Telstra

24x7 App.

dEVICE ONLINE

While your device is connected to the internet,

visit myprepaid.telstra.com/mbb

Use Device Online to:

• Check your balance and credit expiry

• Recharge

• Check your data and recharge history

MANAGING YOUR

PRE-PAId SERVICE

MY ACCOUNT - MANAGE ALL YOUR TELSTRA

SERVICES IN ONE PLACE

You can access My Account online at telstra.com/myaccount

If you don’t already have a My Account, you’ll need to register

at telstra.com/myaccount (you only need to do this once).

Choose a username and password. Only the person who

activated the service can register for My Account online.

Use My Account to:

• Check your balance and credit expiry

• Recharge

• Check your data and recharge history

17 18

Andere Handbücher für E8278

Inhaltsverzeichnis

Andere Huawei WLAN-Router Handbücher

Huawei

Huawei E8238 Einrichtungshandbuch

Huawei

Huawei Mobile WiFi Bedienungsanleitung

Huawei

Huawei E5770s-320 Technische Daten

Huawei

Huawei B535-232 Bedienungsanleitung

Huawei

Huawei WiFi Q2 Pro Bedienungsanleitung

Huawei

Huawei B525 LTE CPE Bedienungsanleitung

Huawei

Huawei Speed Wi-Fi NEXT W04 Kurzanleitung

Huawei

Huawei 5G Mobile WiFi Pro Bedienungsanleitung

Huawei

Huawei DG8245V Bedienungsanleitung

Huawei

Huawei Speed Wi-Fi NEXT W01 Kurzanleitung

Huawei

Huawei Quidway AR-18-12 Bedienungsanleitung

Huawei

Huawei E5785-320 Bedienungsanleitung

Huawei

Huawei WS330 Bedienungsanleitung

Huawei

Huawei WS5200 Bedienungsanleitung

Huawei

Huawei E5186 Bedienungsanleitung

Huawei

Huawei E5220 Bedienungsanleitung

Huawei

Huawei WS329 Bedienungsanleitung

Huawei

Huawei AR Series Betriebsanleitung

Huawei

Huawei EG8245W5-6T Bedienungsanleitung

Huawei

Huawei WS330 Bedienungsanleitung

Huawei

Huawei E5885 Bedienungsanleitung

Huawei

Huawei Pocket WiFi Pro Montageanleitung

Huawei

Huawei E585 Bedienungsanleitung

Huawei

Huawei E5785Lh-22c Technische Daten

Beliebte WLAN-Router Handbücher anderer Marken

Milesight

Milesight UG67 Bedienungsanleitung

Airlogic

Airlogic AirSync Class 1 Betriebsanleitung

Samsung

Samsung WCH730B Bedienungsanleitung

TELEFONICA

TELEFONICA USB Adapter Bedienungsanleitung

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Bedienungsanleitung

Askey

Askey RAC2V1K Bedienungsanleitung

Alloy

Alloy WLF2454AP-S Bedienungsanleitung

TP-Link

TP-Link TL-WR542G Bedienungsanleitung

NETGEAR

NETGEAR WNR2000v4 Bedienungsanleitung

Hama

Hama 53120 Bedienungsanleitung

Intellinet

Intellinet 524582 Bedienungsanleitung

Asus

Asus RT-N10P Bedienungsanleitung

D-Link

D-Link DIR-506L Bedienungsanleitung

Sapido

Sapido GR297n Bedienungsanleitung

Asus

Asus DSL-N55U Bedienungsanleitung

AMTC

AMTC WR7502 Bedienungsanleitung

Compaq

Compaq CP-2W - iPAQ Connection Point Bedienungsanleitung

SMC Networks

SMC Networks WBR14-N2 FICHE Bedienungsanleitung