Human care Carl-Oskar Bedienungsanleitung

Accessory manual

Carl-Oskar, Rebel, Carl-Oskar RA, Staffan RA, Rebel RA,

Carl-Oskar TW/gåbord, Staffan TW/gåbord, Rebel TW/

gåbord, Svea TW/gåbord.

www.humancaregroup.com

Content

ENGLISH

Accessory overview 3

Assembly Tray 4

Assembly Slow Down Brake 4

Assembly cane holder 5

Assembly One Hand Brake 6

Assembly Back Support 7

Assembly Curb Climber 8

Assembly Splash Guard 9

Assembly Oxygen Holder 9

Assembly Basket 11

SVENSKA

Tillbehörsöversikt 12

Montering bricka 13

Montering släpbroms 13

Montering käpphållare 14

Montering enhandsbroms 15

Montering ryggband 16

Montering steghjälp 17

Montering stänkskydd 18

Montering Syrgashållare 18

Montering korg 20

www.humancaregroup.com

Accessory Manual (ENG)

Carl-Oskar, Rebel, Carl-Oskar RA, Staffan RA, Rebel RA, Carl-Oskar TW, Staffan

TW, Rebel TW, Svea TW.

Accessory overview

Image Description Part no

Tray

Practical for

resting light

weight items.

C-O & Rebel:

57 cm: 10651,

62cm, 67cm and

72cm: 10602

C-O RA/TW,

Rebel RA/TW:

10602

Staffan RA/TW,

Svea TW:

Not avaliable

Slow down

brake

Prevents

the rollator

from moving

too fast and

enables a

controlled

walking speed

for the user.

C-O & Rebel:

10620

C-O RA/TW,

Rebel RA/TW:

10620

Staffan RA/TW,

Svea TW:

Not avaliable

Cane

holder

Simplifies the

transportation

of a cane.

C-O & Rebel, C-O

RA/TW, Rebel

RA/TW:

10603

Staffan RA/TW:

40603

Svea TW:

Not avaliable

One-hand

brake

Allows the

user to

control brake

functions with

one hand.

C-O & Rebel, C-O

RA/TW, Rebel

RA/TW:

10652

C-O RA/TW,

Rebel RA/TW,

Svea TW: 10653

Staffan RA/TW:

10653 (low) 10654

(high)

Image Description Part no

Backrest

Supports the

back while

resting.

C-O and Rebel:

57 cm, 62cm and 67

cm models: 10621.

Part no. for 72cm

model: 10655

All other models:

Not avaliable

Curb

climber

Helps raise the

rollator onto a

curb.

C-O & Rebel, C-O

RA/TW, Rebel

RA/TW, Svea TW:

10612

Staffan RA/TW:

Not avaliable

Splash

guard

Protects legs

and clothes.

Sold in pairs.

C-O, C-O RA/TW:

10608

All other models:

Not avaliable

Oxygen

holder

Holds oxygen

tube

firmly in place.

C-O & Rebel, C-O

RA/TW, Rebel

RA/TW: 10615

Staffan RA/TW:

40605

Svea TW:

Not avaliable

Basket

with

handle

Basket ideal

for shopping.

C-O & Rebel, C-O

RA/TW, Rebel

RA/TW:

10601

Staffan RA/TW:

40601

Svea TW:

Not avaliable

www.humancaregroup.com

Assembly Tray

Carl-Oskar, Rebel, C-O RA/TW, Rebel RA/TW

Assemble the tray on to the seat of the rollator

as according to picture. Remove the tray from

the seat by pulling in the back of the tray.

For the RA/TW models the tray is only suitable

for the models with a seat.

maximum weight: 5 kg

ENG

Assembly Slow Down Brake ENG

Place the two parts of the slow down brake

above the rear fork (see picture 1).

Preassemble the slow down brake with the

screws and the locking nuts.

Adjust by heightening or lowering so that the

wear washer on the tyre brake can move easily

without the slow down brake coming in its way.

The slow down brakes wheel shall also be in the

center of the rollators tyre.

Tighten the screws and assure that the slow

down brake is hardly tightened.

Adjustment of slow down brake (picture 2)

Tighten the knob until preferred pressure is

attained (the harder pressure the more inert

rolling of the rollator).

Lock the knob by tightening the nut.

Picture 1

www.humancaregroup.com

Assembly cane holder ENG

Assembling upper part.

The cane holder is delivered in two main parts, an

upper and a lower. These are in turn composed of

two parts, verify that you have received them.

1. Open the clamp about that much it can be lead

over the handle pipe.

2. Before closing the clamp, take the attachment

and lead the pliers of the clamp through the

hole of the attachment. Attend on turning it in

preferred position.

3. Close the clamp and tighten the screw. Note!

Make sure that the attachment is secured.

Assembling lower part.

1. Open the clamp about that much it can be lead

over the handle pipe.

2. Before closing the clamp, take the cup and

lead the pliers of the clamp through the hole of

the attachment. Attend on turning it in preferred

position.

3. Close the clamp and tighten the screw. Note!

Make sure that the cup is secured.

www.humancaregroup.com

Assembly One Hand Brake ENG

The one-hand brake allows the user to brake the

walking-aid with one hand.

The single hand brake can be assembled

afterwards or be ordered as preassembled.

When ordering a preassemled single hand brake,

please state on which side the handle brake

should be placed.

Disassembling

1. Disassemble the wires from the wheels on

both sides of the rollator. Disassemble the end

cover (1) from the holder (5) and remove the

wires and wire housings from the rollator.

2. Remove the brake lever (2) on the side which

shall not be used as one-hand brake.

Assembling

1. Attach the two adapters (6) in the end cover

back (7).

2. Assemble the belonging wires and wire

housings and attach the end cover back. Pull

the wires around the roll (3) and secure it with

the brake handle pin (4) to the brake lever.

Attach the brake lever to the holder.

3. Assemble the wires to the wheels on each side.

The shorter wire housing shall be assembled

on the same side as the one-hand brake.

4. Adjust the brake with the adjustment screw for

increased / decreased braking action.

Assembly Back Support ENG

The back support comes with the following parts:

A: Holder (2st)

B: Holder (2st)

C: Screw M4x14 (4st)

D: Screw M4x20 (4st)

E: Nut M4 (8st)

F: Back strap (1st)

www.humancaregroup.com

The back strap can be adjusted to different

lengts

Fold both ends of the back strap (so they

overlap each other) until preferred length is

achieved.

Draw the radius and the holes on the

underlying part and cut it along the marking.

Control measure the new end. The distance

from the hole to the radius shall be 7mm.

7mm

Assembling of the back support to the rollator

Place the holders (A and B) to the pipe, where

the bending begins, and put the end of the back

strap between them.

Push the strap against the holder A so the two

protruding cylinders pushes through the straps

hole. Press the two holders against each other

and tighten with the screws. The screw C is for

the front holes where the back strap is fixed.

The screw D is for the rear holes.

Pay attention to cracks and loose parts. Make

sure the back support is firmly tightened by

pulling it.

The rollator must NOT be hanged, carried or

lifts in its back support.

CDA

Assembly Curb Climber ENG

1. Disassemble pinbolt and nut.

2. Assemble the curb climber on the right or

left inside of the rollator after height, as

according to table.

3. Fix the curb climber with new pinbolt and nut.

The curb climber has three holes which does

it suitable for both Carl-Oskar, Rebel and Svea,

and possible to set after height from ground.

www.humancaregroup.com

Assembly Splash Guard ENG

The splash guard shall be assembled in the inside

of the rollator by the attachment on to the rear

fork.

Attachment

Assembled on the rollator

Distance between curb climber and ground, see

table below.

Carl-Oskar Rebel/Svea

61mm -

76mm 22 mm

91mm 37 mm

- - - - - - - - - - - - - - - A

- - - - - - - - - - - - B

- - - - - - - - - C

Instrucons for using the curb climber

Place the sole on the curb climber and by

moving the rollator backward, the front wheel

lifts. Do not step on the curb climber.

Note! Pinbolt and nut must be replaced when

assembling the curb climber.

www.humancaregroup.com

Assembly Oxygen Holder ENG

Assembling the oxygen holder

The oxygen holder is delivered complete with

two preassembled straps

Preassembled straps

1. Loosen the straps before the tank is put in

place by pushing the lock, on the strap, and

pull out the loop to preferred size.

Pull in this direction to

secure the tank.

Push to

loosen

2. Tighten both straps when the tank is in place

to secure it.

Assembling the oxygen holder on the rollator

1. Tilt the oxygen holder and pull it through the

upper gate. The holder shall be placed in the

middle of the gate.

2. Hook the oxygen holder to the lower pipe of

the gate and lt it back (vercal) so that the

upper aachment on the holder slides under

the upper pipe of the gate.

www.humancaregroup.com

3. Make sure the oxygen holder is kept in place.

C-O & Rebel, C-O RA/TW, Rebel RA/TW:

Place and aach the basket under both of the

hooks with the straight side of the basket against

the gate, as according to picture. Note! Placing

of basket is only allowed when the rollator is in

unfold posion. Max load 10kg.

Assembly Basket ENG

Staan RA/TW:

Assemble the basket on the rollator by hanging

the basket in the hooks on the front of the

rollator.

Andere Handbücher für Carl-Oskar

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere human care Mobilitätshilfe Handbücher

human care

human care Push Handle Bedienungsanleitung

human care

human care Fellow Classic Bedienungsanleitung

human care

human care NSB-401 Bedienungsanleitung

human care

human care Carl-Oskar Gebrauchsanweisung

human care

human care 4200LX Bedienungsanleitung

human care

human care Leia Bedienungsanleitung

human care

human care neXus Gebrauchsanweisung

human care

human care Carl-Oskar Bedienungsanleitung

human care

human care neXus Soft Bag Bedienungsanleitung

human care

human care Carl-Oskar RA Gebrauchsanweisung

human care

human care Svea Trolley Bedienungsanleitung

human care

human care Rebel Gebrauchsanweisung

human care

human care Fellow Classic Gebrauchsanweisung

human care

human care FloorLine-i Bedienungsanleitung

human care

human care Altair Bedienungsanleitung

human care

human care Staffan RA Gebrauchsanweisung

human care

human care Carl-Oskar Bedienungsanleitung

human care

human care Slings Bedienungsanleitung

human care

human care Rebel Bedienungsanleitung

human care

human care NeXus 3 Bedienungsanleitung

human care

human care Fellow Supreme Bedienungsanleitung

human care

human care Parade Bedienungsanleitung

human care

human care 1475 Bedienungsanleitung

human care

human care NeXus 3 Gebrauchsanweisung

Beliebte Mobilitätshilfe Handbücher anderer Marken

Alber

Alber Scalamobil iQ Bedienungsanleitung

Ferno

Ferno CCT-PX Bedienungsanleitung

HEPRO

HEPRO Gripo Bedienungsanleitung

Otto Bock

Otto Bock Pheon 3R62 Bedienungsanleitung

NRS Healthcare

NRS Healthcare M11090 Bedienungsanleitung

Medline

Medline MDS86835DSHEC Installationsanleitung

Guldmann

Guldmann Twin Turner II Bedienungsanleitung

Drive

Drive ROOMBA Bedienungsanleitung

Gate

Gate Balder Bedienungsanleitung

Decon wheel

Decon wheel TNS Notos Bedienungsanleitung

ExoAtlet

ExoAtlet ExoAtlet-II Bedienungsanleitung

Invacare

Invacare Storm Series Bedienungsanleitung

Rhythm Healthcare

Rhythm Healthcare B3800F Bedienungsanleitung

AMF-BRUNS

AMF-BRUNS PROTEKTOR Bedienungsanleitung

Drive DeVilbiss Healthcare

Drive DeVilbiss Healthcare OTTER Bedienungsanleitung

Rhythm Healthcare

Rhythm Healthcare C500U Bedienungsanleitung

Lumex

Lumex RJ4200A Bedienungsanleitung

Rebotec

Rebotec Jumbo Bedienungsanleitung