Hunter LUXOR Accessories Bedienungsanleitung

LUXOR®Accessories

WI-FI SYSTEM COMPONENTS

Luxor Wi-Fi Control System

Lighting Accessories by Hunter Industries

Table of Contents

3Wi-Fi Overview

3Overview

3Components

4Glossary of Terms

5Wi-Fi Installation

7Wi-Fi Setup

7Setup

7Connecting to an Existing Network (Wi-Fi Module)

10 Connecting to an Existing Network (LAN)

12 Direct Connect

14 Multiple Controllers

15 Wi-Fi Care and Maintenance

15 Wi-Fi Tips

16 Troubleshooting

17 Wi-Fi Legal Information

17 Regulatory and Legal Information

18 Approved External Antenna Types

19 Notes

Wi-Fi Overview

Controllers with Luxor technology are capable of communicating with iOS® and Android™ smart devices for

on–demand changes to your outdoor lighting system.

Overview

Components

LAM Module Wi-Fi Module iOS or Android smart device

Wi-Fi Overview

Glossary of Terms

Group: An addressed set of lights that is designated numerically

and controlled as a set by the controller

Theme: A predetermined set of groups, intensities, and colors

called to action by the program or manual functions

Fixture/Luminaire: Light unit that contains any low-voltage LED

board or device with ZD Technology® or ZDC Technology®

Intensity: Value indicating measurable amount of brightness,

from 1% to 100%

Event: The initiation, adjustment, or conclusion of a selected

theme or group with specic intensity and/or color settings

Duration: The length of an event

Hue: The primary attribute of a color represented by values from

0 to 359

Saturation: The richness of a color mixed with white light, from

0% to 100%

Color: The visual combination of hue and saturation

LAM: Light Assignment Module; a device that remotely assigns

each low-voltage LED xture or device with ZD Technology or

ZDC Technology to a specic group

RSSI: Relative Signal Strength Indicator, or a number

representing Wi-Fi signal strength

Direct Connect: A Wi-Fi mode using the Wi-Fi Module allowing

the controller to broadcast its own network for connection with

one smart device

LAN: Local Area Network; controller can connect directly into a

network through a Cat 6 cable

Router: A networking device that allows computers and

electronic devices to exchange data

SSID: Service Set Identier, or the unique identifying name for a

wireless LAN

Wi-Fi Installation

Step 1: Press lever to the le.

Step 2: Pull facepack outward.

Step 3: Insert Wi-Fi or LAN

cable.

LAN DMX Wi-Fi

Step 4: Remove plastic cap

by pressing tabs and pushing

down.

WI-FI MOD ONLY: Ensure

the facepack locks into place

and antenna wire is seeded

through the wire slot. DO NOT

PINCH THE ANTENNA WIRE.

Step 5: WI-FI MOD ONLY:

Insert the cover threads

though the exposed hole.

Secure module using supplied

metal nut.

Wi-Fi Installation

Step 6: Reconnect

communication cable. Close

facepack, and ensure it locks

into place.

Note

The menu option changes depending on the preferred

wireless connection. The LAN menu is the default

option. Wi-Fi will appear if the WIFIMOD2 is plugged

into the facepack.

Wi-Fi Setup

Setup

There are two ways to associate a controller with a Wi-Fi

network: through a networked Wi-Fi router or directly to a

wireless iOS or Android device.

Connecting to an Existing Network (Wi-Fi Module)

To connect a controller to an existing Wi-Fi network, follow the

steps below. Please ensure the Wi-Fi module is already installed

per the instructions in the installation section.

1. From the Home screen, navigate to the Setup screen using

the scroll wheel.

2. Scroll to and select Wi-Fi.

Note

The controller defaults to “Direct Connect” mode.

Wi-Fi Setup

3. Scroll to Network eld and press scroll wheel to choose a

specic network.

4. The Wi-Fi Networks page auto-populates with the SSIDs of

local wireless networks within range of the controller. The

security column displays “Y” or “N” (yes or no) if a password

is required to connect to that network. The RSSI column

displays a numeric value to indicate the signal strength of

each network. RSSI is measured between zero and 120, with

optimum performance above 70.

5. If a “Y” was displayed for the selected network, a password

entry screen will appear. Select each box to scroll for the

desired character and press the scroll wheel to nalize that

character. Move to the next character space and repeat the

process until the full password is entered.

Note

Connection can take up to 20 seconds. Note

For best results, ensure an RSSI of 70+.

8. If the network SSID does not appear in the list of available

networks, but the network is close enough that it should be

able to connect, select the “Other Network” button from the

Wi-Fi networks page.

Wi-Fi Setup

6. Select “OK.”

7. The controller will then connect to the network.

9. Enter the SSID of the desired network.

10. Select the appropriate password button and enter the

password accordingly as shown previously. Hint: WPA is the

most common in modern networks.

Note

This menu option changes depending on which

network connection is being used. “Wi-Fi” displays

only when the Wi-Fi module is connected into the

accessory port. If no Wi-Fi is present, LAN will appear

by default.

Wi-Fi Setup

Connecting to an Existing Network (LAN)

A direct connection between the controller and the network

equipment can provide a more reliable connection. A LAN

adapter is pre-installed into the Luxor controller. Insert ethernet

cable into LAN port to begin LAN connection process.

1. From the Home screen, navigate to the Setup screen using

the scroll wheel.

2. Scroll to and select LAN.

Inhaltsverzeichnis

Beliebte Außenleuchte Handbücher anderer Marken

Sealey

Sealey LED37 Bedienungsanleitung

nordlux

nordlux VEJERS Benutzerhandbuch

SImx

SImx ELITE LED LHTC637 Bedienungsanleitung

GEV

GEV CAROLINE 10833 Bedienungsanleitung

WE-EF

WE-EF PFL540 LED Bedienungsanleitung

Lindby

Lindby 9949029 Bedienungsanleitung

HEPER

HEPER DOGO Side LW6048.585-US Montage- und Bedienungsanleitung

Maretti

Maretti VIBE S 14.6080.04.A Bedienungsanleitung

BEGA

BEGA 84 253 Handbuch

HEPER

HEPER LW8034.003-US Montage- und Bedienungsanleitung

HEPER

HEPER MINIMO Montage- und Bedienungsanleitung

LIGMAN

LIGMAN BAMBOO 3 Bedienungsanleitung

Maretti

Maretti TUBE CUBE WALL 14.4998.04 Bedienungsanleitung

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB Bedienungsanleitung

urban ambiance

urban ambiance UQL1273 Bedienungsanleitung

TotalPond

TotalPond 52238 Bedienungsanleitung

Donner & Blitzen

Donner & Blitzen 0-02661479-2 Bedienungsanleitung

LIGMAN

LIGMAN DE-20023 Bedienungsanleitung