Husky HOLT72XDB11 Bedienungsanleitung

THANK YOU !

USE AND CARE GUIDE

Questions, problems, missing parts?

Before returning to the store, call

Husky Customer Service

8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday

1-888-HD-HUSKY

HUSKYTOOLS.COM

Model # HOLT72XDB11

THD.com # 1003 897 962

HUSKY 72 IN. ADJUSTABLE HEIGHT WORK TABLE

We appreciate the trust and confidence you have placed in Husky through the purchase of this work table. We strive to continually

create quality products designed to enhance your home. Visit us online to see our full line of products available for your home

improvement needs. Thank you for choosing Husky!

SKU # 1003 951 538

Table of Contents

Table of Contents ......................................................

Safety Information

........................................................

Warranty ........................................................................

Pre-Assembly

.......................................................

Assembly ...............................................................

Operation ................................................................

Safety Information

DANGER: Do not stand on this product. You

may fall or cause the product to tip.

WARNING: Keep the product on a level

surface. The product may become unstable and

tip if not properly leveled.

CAUTION: Do not lift this product directly

with a forklift or tow with any mechanical

devices.

CAUTION: Do not exceed the maximum weight

loading capacity of 300 lbs.

Care and Cleaning

...................................................

Service Parts

....................................................................

Tools Required ..............................................................

Hardware Included

.......................................................

Specifications ................................................................

Package Contents

................................................

2

DANGER: Is used to indicate a hazardous situation which,

if not avoided, will result in serious injury or death.

CAUTION:

if not avoided, may result in minor injury, moderate injury,

Is used to indicate a hazardous situation which,

or property damage.

WARNING:

Indicates a hazardous situation which, if not

avoided, could result in serious injury or death.

CAUTION:Read and follow all Safety Rules and Operating

Instructions before first use of this product.

WARNING:

Due to the product’s weight, it is recommended

that 2 or more people help assemble and move this

workbench to help reduce the risk of injury.

CAUTION:Check screws and bolts periodically for tightness.

Warranty

3

The manufacturer warrants the product to be free from defects in materials and workmanship for a period of three years from date of(3)

purchase. This warranty applies only to the original consumer and only to products used in normal use and service. If this product is

found to be defective, the manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of the product at the

manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, accident, modifications, alteration

neglect or mishandling. This warranty shall not apply to any product that is found to have been improperly installed, set up, or used in

any way not in accordance with the instructions supplied with the product. This warranty shall not apply to a failure of the product

as a result of an accident, misuse, abuse, negligence, alteration, faulty installation, or any other failure not relating to faulty material or

workmanship. This warranty shall not apply to the finish on any portion of the products such as surface and/or weathering, as this is

considered normal wear and tear.

The manufacturer does not warrant and specifically disclaims any warranty, whether express or implied, of fitness for a particular purpose,

other than the warranty contained herein. The manufacturer specifically disclaims any liability and shall not be liable for any consequential

or incidental loss or damage, including but not limited to any labor/expense costs involved in the replacement or repair of said product.

Contact the Customer Service Team at 1-888-HD-HUSKY or visit www.huskytools.com.

HUSKYTOOLS.COM

Please contact 1-888-HD-HUSKY for further assistance.

Pre-Assembly

TOOLS REQUIRED

Safety

goggles

HARDWARE INCLUDED

SPECIFICATIONS

Bolt M8 x 15L

Screw M6 x 15L

AA BB

Maximum capacity 300 lbs

4

NOTE:

Part Description Quantity

Phillips

10 mm

Wrench

CC Washer M8 4

Hardware not shown to actual size.

Begin product assembly close to the final

intended location of your workbench. This product

is heavy and may be difficult to move after assembly.

13 mm

Wrench

DD 5/8 in. Wrench 1

screwdriver

5

Pre-Assembly (continued)

PACKAGE CONTENTS

HUSKYTOOLS.COM

Part Description Quantity

A Wood top 1

B Leg (Right) 1

C Crank handle 1

D Leveling feet 4

E Leg (Left) 1

F Top rail 1

G Rotating rod 1

H Support rail 1

I Caster 4

Please contact 1-888-HD-HUSKY for further assistance.

Assembly

6

While unpacking the unit, you can leave the workbench wood top (A)

inside the original packaging to prevent the top from being

scratched during assembly.

Determine the front and back of the top before starting. The front of

the wood top (A) has the Husky badge on the edge.

Attach the right leg (B) to the wood top (A) as shown using four

M6x15L screws (AA). Be sure that the rotating mechanism faces the

Attach the rotating rod (G) to the rotating mechanism in the leg (B).

Option 1: Attach the support rail (H) to the bottom of the leg (B) and leg

7a.

Attach the top rail (F) to the wood top (A), leg (B), and leg (E) using

eighteen M6x15L screws (AA). Do not overtighten the screws.

Note: Do not overtighten the screws into the wood top to avoid

damaging the wood top.

(E) using four M8x15L bolts (BB) and four M8 washers (CC). Finger

inside of work table.

Attach the left leg (E) to the wood top (A) using four M6x15L screws

(AA). Finger tighten only. Be sure that the rotating rod (G) clicks into

the leg (E).

Note: Do not turn the rotating rod yet to ensure that the leg remains

at its lowest level.

tighten only. The support rail can attach in the middle or rear of the

legs. Attach it at your desired position. See step 7b for Option 2.

Front

HCC

Assembly (continued)

10.

Square the workbench and then securely tighten all fasteners with a

Screw the four leveling feet (D) or casters (I) all the way into the leg

assemblies to the maximum depth. Some adjustment may be

Using two or more people, stand the workbench in its upright

necessary after the workbench is in the desired location to properly

position.

level and use the product.

10 mm and 13 mm wrench.

Note: Use caution to not overtighten.

11. Install the crank handle (C) into the shaft in the corner below the

Caster installation

Leveling feet installation

wood top as shown.

Option 2: Attach the support rail (H) to the bottom of the leg (B) and

7b.

leg (E) using four M8x15L bolts (BB) and four M8 washers (CC).

Finger tighten only.

Note: Use caution to not overtighten.

Note: Leveling feet have been pre-assembled on the leg.

BB CC

HUSKYTOOLS.COM

Please contact 1-888-HD-HUSKY for further assistance.

Operation

Height AdjustmentLeveling Foot Adjustment

IMPORTANT : Ensure there is no weight on top of the

workbench when leveling.

8



1

□ Adjust each leveling foot (D) to the desired elevation with

□ Turn the lock nut counterclockwise to elevate and clockwise

a 5/8 in. wrench as shown.

to lower the leveling foot.

□

The steel in this product has been coated with industrial powder

harsh chemicals such as oil or grease to remain on the powder

coating surface. Use a glass cleaner ( Windex or equivalent product)

□

The wood top is made of Parawood (also called Rubberwood), which

cleaned with most gentle household cleaners, such as Windex .

Insert the crank handle (C) into the shaft and align it in the hole

until it is engaged.

To raise the table, turn the crank handle counterclockwise to

the desired height.

To lower the table, turn the crank handle clockwise until it

reaches the desired height.

To avoid damage, do not keep turning the crank handle once

□

Do not allow chemicals, water, or other substances to remain on the

to the wood.

Note: Some minor squeaking is normal when operating the

crank. Lubrication is not needed.

Maintenance

it has rested at its highest or lowest position.

Care and Cleaning

Maintaining the casters

□ Grease the casters annually using high quality

bearing grease.



1coating for a durable finish. To help protect this finish, do not allow

to clean and maintain all powder coated surfaces.

has a UV coating to help protect it from moisture. It can be

wood top for extended periods of time to reduce the risk of damage

9

Service Parts

Part Description Quantity

A Wood top 1

B Leg (Right) 1

C Crank handle 1

D Leveling feet 4

E Leg (Left) 1

F Top rail 1

G Rotating rod 1

H Support rail 1

I Caster 4

HUSKYTOOLS.COM

Please contact 1-888-HD-HUSKY for further assistance.

Questions, problems, missing parts? Before returning to the store, call

Husky Customer Service

8 a.m.-7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday

1-888-HD-HUSKY

HUSKYTOOLS.COM

Retain this manual for future use.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Husky Inneneinrichtung Handbücher

Husky

Husky HPRO72HUTCHBRD Bedienungsanleitung

Husky

Husky UACT-H-270111 Bedienungsanleitung

Husky

Husky HOLT5201B11 Bedienungsanleitung

Husky

Husky HOTC5218B1QES Bedienungsanleitung

Husky

Husky HOLT7202B12 Bedienungsanleitung

Husky

Husky MR482478W5 Bedienungsanleitung

Husky

Husky HPRO63TLOCKERBLK Bedienungsanleitung

Husky

Husky HTA-102B12R Bedienungsanleitung

Husky

Husky H27PC1 Bedienungsanleitung

Husky

Husky HPRO72MWC20BLK Bedienungsanleitung

Husky

Husky MR482478W5 Bedienungsanleitung

Husky

Husky HOLT62XDB11 Bedienungsanleitung

Husky

Husky H27LOCKER Bedienungsanleitung

Husky

Husky HPRO27SLOCKERBLK Bedienungsanleitung

Husky

Husky BED1007 KING Bedienungsanleitung

Husky

Husky HOLT5202B11 Bedienungsanleitung

Husky

Husky HBR902490W5 Bedienungsanleitung

Husky

Husky HOLT7202B11 Bedienungsanleitung

Husky

Husky HBR782478W4C Bedienungsanleitung

Husky

Husky HOLT4602B12 Bedienungsanleitung

Husky

Husky HTC5206 Bedienungsanleitung

Husky

Husky HOWT5201BB1XUS Bedienungsanleitung

Husky

Husky HOTL6202B12 Bedienungsanleitung

Husky

Husky ERPB4020B Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung