Husky HOTC5218B1QES Bedienungsanleitung

USE AND CARE GUIDE

52 IN. -18 DRAWER TOOL CHEST

Questions problems missing parts?,,

Before returning to the store call,

Husky Customer Service

HUSKYTOOLS COM.

AND CABINET SET- BLACK POWDER COATED

Model #HOTC5218B1QES

Item #1000 017 605

1-888-43-HUSKY

8 a.m - 6 p.m. EST Monday Friday,, -

Table of Contents

Table of Contents.....................................................................2

Safety Information...................................................................2

Warranty.......................................................................................3

Pre-Assembly............................................................................4

Assembly............................................................................6

Operation...........................................................................8

Maintenance.....................................................................9

Safety Information

7. Do not pull the units push them when moving,.

8. Do not alter this product in any manner.

DANGER: .Do not stand on this product You

may fall or cause the product to tip.

DANGER:Do not move the product prior to

closing and locking all the drawers The.

drawers could come open and make the

product unstable and tip.

DANGER:Do not mount this product on a

truck bed or any other moving object.

WARNING:Keep the product on a level

surface The product may become unstable and.

tip if stored or moved on an uneven surface.

WARNING: .Be careful when closing the cover

Remove hands before closing the cover.

CAUTION:Do not lift this product directly

with a forklift or tow with any mechanical

devices.

CAUTION:Do not exceed the maximum

product weight including contents Do not,.

exceed the maximum weight for each drawer.

See Specifications on page 4.

CAUTION:Only transport this product when

empty. Properly secure when transporting.

1. Do not open more than one drawer at a time.

2. Do not let children approach the tool chest / cabinet.

5. Lock both the lid and all drawers before moving

the cabinet / chest.

3. To help prevent the product from tipping, load the product

starting with the bottom drawers.

6. Do not step in any drawer / drawers.

4. Keep the locking casters brake set unless you are

moving the cabinet. This will help to prevent the product

from rolling.

Care and Cleaning..........................................................9

Service Parts....................................................................10

Tools Required...........................................................................4

Hardware Included....................................................................4

Specifications............................................................................4

Package Contents......................................................................5

Warranty

The manufacturer warrants the product to be free from defects in materials and workmanship for a period of three (3) years from date of

purchase This warranty applies only to the original consumer and only to products used in normal use and service If this product is ..

found to be defective the manufacturer’s only obligation and your exclusive remedy is the repair or replacement of theproduct at the,,,

manufacturer’s discretion provided that the product has not been damaged through misuse abuse accident modifications alteration,,,,,

neglect or mishandling This warranty shall not apply to any product .that is found to have been improperly installed set up or used in ,-,

any way not in accordance with the instructions supplied with the product This warranty shall not apply to a failure of theproduct.

as a result of an accident misuse abuse negligence alteration faulty installation or any other failure not relating to faulty material or,,, , , ,

workmanship This. warranty shall not apply to the finish on any portion of the products /,such as surface and or weathering as this is

considered normal wear and tear.

The manufacturer does not warrant and specifically disclaims any warranty whether express or implied of fitness for a particular purpose,, ,

other disclaims any liability and shall not be liable for any consequentialthan the warranty contained herein The manufacturer specifically .

or costs involved in the replacement or repair of said product.incidental loss or damage including but not limited to any labor expense ,/

Contact the Customer Service Team at HUSKY or visit www huskytools com.-..1-888-43

HUSKYTOOLS COM.

Please contact 1-888-43-HUSKY for further assistance.

Pre assembly-

TOOLS REQUIRED

Phillips

screwdriver Safety

goggles 10 mm

Wrench 13 mm

Wrench

HARDWARE INCLUDED

NOTE:Hardware not shown to actual size.

Part Description Quantity

Bolt M6x15L

BB Washer M8

CC 24

Bolt M8x20L

Screw M4x8L

SPECIFICATIONS

Maximum capacity (chest drawer) 300 lbs.

Maximum capacity (cabinet drawer) 800 .lbs

Empty weight 374 lbs.

NOTE: Begin product assembly close to the final

intended location of your chest cabinet This/.

product is heavy and may be difficult to move

after assembly.

Pre assembly (continued)-

PACKAGE CONTENTS

Part Description Quantity

A Gas lift 2

B Top chest 1

C Bracket 2

D Side handle 1

E Rolling cabinet 1

F Swivel caster with brake 4

G Drawer slide (pair) 20

Part Description Quantity

H Regular caster 2

I Drawer 18

J Lock 2

K Key (set) 2

L Husky badge 2

M Drawer Liner 19

HUSKYTOOLS COM.

Please contact 1-888-43-HUSKY for further assistance.

Assembly

1Attaching the side handle 2Installing the casters

□Attach the side handle D to the rolling cabinet E() ()

using six bolts ().AA

NOTE:The holes in the cabinet are tapped and do not

require nuts.

□Ensure all cabinet drawers are securely locked into

□Lay the rolling cabinet E on its back Use the() .

packaging material to protect the finish.

□Mount the four swivel casters with brake F to the()

rolling cabinet (E) using four bolts ()CC and washers

(. ()BB) per caster wivel casters with brake FThe s

□Mount the two regular casters H to the center()

the rolling cabinet (E) using four bolts (CC) and

□Tighten all bolts with a wrench.

□

Return the rolling cabinet (E) to its upright position.

CAUTION: .Do not over tighten the screws

3Placing the chest

□Place the top chest (B) on top of the rolling cabinet (E).

NOTE:Two people may be required to complete

this step.

□place using the key lock on the rolling cabinet (E).

4Installing the brackets

□Attach the brackets (C) to the back of the

Place the brackets over cabinet (E). the holes and

NOTE:The holes in the cabinet are tapped and do not

require nuts.

□

Tighten all screws securely with a screwdriver.

product to secure the top chest (B) to the rolling

should be installed on e .ach end at the cabinet

washers BB) per caster(.

secure with four screws (DD) per bracket.

Assembly ()continued

5Installing the drawer liner

□Place the drawer liners (M) in appropriately sized drawers

and the chest lid area to protect the surface.

HUSKYTOOLS COM.

Please contact 1-888-43-HUSKY for further assistance.

Operation

Installing the drawers

□Pull the slides and slide carrier out until fully extended.

□Hold the slide on the cabinet while aligning it with

the slide on the drawer.

□

□Slowly push the drawer until it is fully closed to

engage the slide.

□Open the drawer and close it to verify proper

operation.

Slightly insert one side and repeat for the other side.

2Removing the drawers

□Fully extend and empty the drawer.

□Depending on the slide either lift or lower the,

release lever on both sides so the slides can ride over

the stops Pull out to remove..

1Locking and unlocking the unit

IMPORTANT:The drawers must be fully closed before

locking / unlocking the unit.

□Insert the key (K) and turn it fully to the left to lock.

□Remove the key (K).

□Insert the key (K) and turn it fully to the right to unlock.

□Remove the key (K).

4Preparing the electrical hole

□A perforated hole is located in the back of the chest to allow

□The perforated hole can be punched through with a small

□Use a metal file to smooth out any sharp edges around the hole.

for the use of a power cord to be used while the chest top lid

is closed.

hammer, mallet, or punch. The hole has been perforated around

the edges. Take care not to damage the cabinet around the

WARNING:Be careful to put the power cord

through the hole, as their may be sharp edges around

the punched hole.

perforation when punching the hole through.

Maintenance

1Maintaining the casters 2Maintaining the drawers

□Grease the casters annually using high quality

bearing grease.

□Periodically clean the drawer trim and,

inside the drawers with a mild detergent and water.

□Remove grease and oil with a standard,

nonflammable cleaning fluid.

□The use of drawer liners is recommended to protect

the finish inside the drawers and make the drawers

easier to clean Drawer liners can be purchased at.

The Home Depot and can be cleaned with soap

□Lubricate the slides semi annually with grease or-

equivalent.

□This steel product has been coated with industrial powder coating

Care and Cleaning

□To help protect the powder coated finish, do not allow harsh

□Use a glass cleaner (Windex or equivalent product) to clean and

chemicals (oil, grease, or other chemical) to remain on the powder

and water.

for a durable finish.

coating surface.

maintain all surfaces of powder coating.

Service Parts

Part Description Quantity

A Gas lift 2

C Bracket 2

D Side handle 1

F Swivel caster with brake 4

G Drawer slide (pair) 20

H Regular caster 2

J Lock 2

K Key (set) 2

L Husky badge 2

M Drawer Liner 19

HUSKYTOOLS COM.

Please contact 1-888-43-HUSKY for further assistance.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Husky Inneneinrichtung Handbücher

Husky

Husky HOLT7202B11 Bedienungsanleitung

Husky

Husky HPRO63TLOCKERBLK Bedienungsanleitung

Husky

Husky HOLT5202B12 Bedienungsanleitung

Husky

Husky H61HUTCH Bedienungsanleitung

Husky

Husky HPRO72MWC20BLK Bedienungsanleitung

Husky

Husky MR481886W6B Bedienungsanleitung

Husky

Husky HOLT52XDB12 Bedienungsanleitung

Husky

Husky HTA-102B12R Bedienungsanleitung

Husky

Husky HPRO27SLOCKERBLK Bedienungsanleitung

Husky

Husky H27LOCKER4 Bedienungsanleitung

Husky

Husky HOLT4602B12 Bedienungsanleitung

Husky

Husky HBR902490W5 Bedienungsanleitung

Husky

Husky HOLT7202B12 Bedienungsanleitung

Husky

Husky HBR782478W4C Bedienungsanleitung

Husky

Husky H27LOCKER Bedienungsanleitung

Husky

Husky H27PC1 Bedienungsanleitung

Husky

Husky MR482478W5 Bedienungsanleitung

Husky

Husky HPRO72HUTCHBRD Bedienungsanleitung

Husky

Husky Work Table HOLT62XDB12 Bedienungsanleitung

Husky

Husky HOLT6202BJ2 Bedienungsanleitung

Husky

Husky HOWT5201BB1XUS Bedienungsanleitung

Husky

Husky ERPB4020B Bedienungsanleitung

Husky

Husky UACT-H-270111 Bedienungsanleitung

Husky

Husky HTC5206 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung